Wheelchair Lift Thorp WI
How Stair Lifts Work
A stair lift is generally a chair that travels along and rail or track that is installed to a staircase.
There is a motor within the base of the chair that is generally powered by a battery also within the base of the chair. The stair lift motor turns a gear that is meshed into a geared strip on the track or rail. When the gear turns the chair is moved along the geared strip. When the motor turns the gear the chair moves one direction, when the motor’s direction is reversed the chair moves the opposite way.
Call/Send switches are utilized to move the stair lift chair without anyone being on it. This is particularly useful if 2 individuals utilize the lift and the lift is at the opposite end of the track when a user wishes to use it. the user just calls the lift to come to them using a call/send switch. Another use of call/send switch is to send the lift away after use. Some people don’t like the look of the lift parked in the main living area of the home in Thorp and will send it to the opposite end when not in use. They simply call it back when required.
Stair Lift Parts
Although the design and style of stair lifts will vary between makers they all have some fundamental parts typical to them all:
Track or Rail – The stair lift track supports the chair, provides a system (generally a geared strip) to propel the chair and guides it up and down the stairs just as a train track guides a train.
Track Overruns – Some stair lifts provide the choice of an overrun at either the top of the track, bottom of the track or both. The purpose of a stair lift track overrun is to move the user far from the stairs to safely access or dismount the stair lift in a location where, if they fall, they won’t fall on the stairs.
Power supply – While a lot of stair lifts are battery ran today all model will need a power supply to either charge the battery or power the unit straight in the case of non-battery powered units. Non-battery powered stair lifts draw a lot of power and generally need a devoted circuit.
Call/Send Controls – Call/Send controls are normally mounted on the wall near each end of the stair lift track to offer a method for a user to call the chair to them or send it away when not required. They can be either wireless or wired to the lift depending on the design.
Seat – The stair lift seat is just a seat for the user to rest on while using the lift. Depending upon the model it might swivel at the top and/or bottom of the track and will typically fold up out of the way when not in use.
Seat Belt – As in an automobile the stair lift safety belt is intended to hold the user securely seated on the seat while the lift is in usage.
Foot Rest – The foot rest of the stair lift is a security function to prevent the the users feet from hitting the steps while using the lift and a comfort feature to support the user’s feet when resting on the seat. The foot rest will have switches developed into them to stop the lift must it hit anything on the staircase and will flip up out of the way when the lift is not in use.
Motor – The motor that drives a stair lift chair along the track is found in the base of the seat.
Transmission – Due to the fact that the motor rotates at expensive a speed to safely move the stair lift the track at kind of transmission is employed to lower the speed while increasing the power available.
Battery Charger – Battery powered stair lifts should have a charger of some sort to keep the battery charged. The battery chargers are generally found under the track or near one end of the track. The battery charger works immediately with no action required by the user.
Battery – The batteries utilized in stair lifts are relatively expensive and found within the base of the seat near the motor. They will have to be replaced at some time but their life span is measured in years and thier replacement ought to not be a big issue.
Ways To Measure For Your Wheelchair Stair Lift Setup In Thorp
Measurement 1: Stand at the top of stairs and extend the measuring tape down to the landing, letting it rest on edge of each tread. The tape should not sag or bend along the way. Record the distance from the edge of the upper landing to where the end of the measuring tape rests on the landing at the bottom of the stairs.
Measurement 2: Measure from the edge of the upper landing (like Measurement 1) to the edge of the very first stair’s tread at the bottom.
Measurement 3: Determine the width of your stair’s treads.
Measurement: Measure from the edge of the first stair at the bottom to the wall (or door), if there is one.
Measurement 5 through 7 Measurements 5-7: These are the tread measurements.
Measurement 8: Measure from the top step to the closest door, wall or other obstruction at the top of the stairs.
The Advantages of Stair Lifts for Senior Citizens In Thorp Wisconsin
Outside stair lift Limited mobility is a concern for many senior citizens and an issue for their families in Thorp. Senior citizens who want to remain in their homes and stay independent can enhance their movement and remain safe by setting up a stair lift.
A stair lift can carry you or a loved one safely from one floor to another in the house. A stair lift can supply a safe ways of transportation so that you will no longer need to stress over the threats of falling on the stairs. It is a specifically great choice for a senior citizen who lives alone.
3 Important Uses for Heavy-Duty Stair Lifts In Thorp
Stair lifts been available in a variety of sizes and capacities. Compact models accommodate and supply movement for narrow staircases, supporting approximately 350 pounds in the process, and at the other end, durable stair lifts provide a wider seat and can manage a greater range of body types.
1. You Can Supply Access to Nearly Everybody
Because of the larger, more powerful design, the stair lift supplies ease of access and enhances movement for anybody who’s much heavier than average. However, the typical stair lift might be too narrow or too short for some, and as the sturdy design offers a larger, higher seat, it even more accommodates anybody who’s taller than average or has trouble conveniently using a basic design.
2. Industrial Applications
While not had to meet ADA requirements, stair lifts supply an added benefit to those with mobility issues.
Within Thorp a house, a standard lift might accommodate two average-sized adults, however what about when you need to deal with the general public? Your customer base, customers, and patients likely come in a range of sizes and shapes, so the durable model essentially matches everyone who would have to use the stairs.
Be aware that, to install a heavy-duty lift, any staircase needs to provide 36 inches of space.
3. For Several Family Members
What takes place, though, when multiple member of the family require ease of access? Whether you’re satisfying a present need or expecting a future one, setting up a larger lift takes everybody’s physical requirements into consideration. If your home’s equipped with enough area, take safety measures by having a heavy-duty lift installed.
Call Us Now 844-561-5857 For A No Obligation Quote