Wheelchair Lift Riverton WY
How Stair Lifts Work
A stair lift is basically a chair that travels along and rail or track that is installed to a stairway.
There is a motor within the base of the chair that is normally powered by a battery also within the base of the chair. The stair lift motor turns a gear that is meshed into a geared strip on the track or rail. When the gear turns the chair is moved along the geared strip. When the motor turns the gear the chair moves one direction, when the motor’s direction is reversed the chair moves the opposite way.
Call/Send switches are used to move the stair lift chair without anyone being on it. This is especially helpful if 2 people utilize the lift and the lift is at the opposite end of the track when a user wishes to utilize it. the user just calls the lift to come to them utilizing a call/send switch. Another use of call/send switch is to send the lift away after use. Some people don’t like the appearance of the lift parked in the main living area of the home in Riverton and will send it to the opposite end when not in use. They merely call it back when needed.
Stair Lift Parts
Although the design and style of stair lifts will vary between makers they all have some standard components common to them all:
Track or Rail – The stair lift track supports the chair, offers a system (typically a geared strip) to move the chair and guides it up and down the staircase just as a train track guides a train.
Track Overruns – Some stair lifts use the alternative of an overrun at either the top of the track, bottom of the track or both. The purpose of a stair lift track overrun is to move the user away from the stairs to safely access or dismount the stair lift in an area where, if they fall, they won’t fall on the stairs.
Power supply – While a lot of stair lifts are battery ran today all model will require a power supply to either charge the battery or power the system straight in the case of non-battery powered units. Non-battery powered stair lifts draw a great deal of power and typically need a devoted circuit.
Call/Send Controls – Call/Send controls are typically installed on the wall near each end of the stair lift track to supply a method for a user to call the chair to them or send it away when not required. They can be either cordless or wired to the lift depending upon the design.
Seat – The stair lift seat is simply a seat for the user to sit on while using the lift. Depending upon the model it might rotate at the top and/or bottom of the track and will generally fold out of the way when not in use.
Seat Belt – As in an automobile the stair lift safety belt is meant to hold the user safely seated on the seat while the lift remains in usage.
Foot Rest – The foot rest of the stair lift is a safety feature to prevent the the users feet from striking the steps while using the lift and a comfort function to support the user’s feet when resting on the seat. The foot rest will have switches developed into them to stop the lift should it hit anything on the stairs and will turn up out of the way when the lift is not in use.
Motor – The motor that drives a stair lift chair along the track is found in the base of the seat.
Transmission – Since the motor rotates at too expensive a speed to securely move the stair lift the track at kind of transmission is employed to lower the speed while increasing the power available.
Battery Charger – Battery powered stair lifts should have a charger of some sort to keep the battery charged. The chargers are usually found under the track or near one end of the track. The charger works instantly without any action needed by the user.
Battery – The batteries used in stair lifts are fairly pricey and found within the base of the seat near the motor. They will have to be replaced at some time but their life expectancy is determined in years and thier replacement should not be a big concern.
How To Measure For Your Wheelchair Stair Lift Setup In Riverton
Measurement 1: Stand at the top of stairs and extend the tape measure down to the landing, letting it rest on edge of each tread. The tape ought to not droop or flex along the way. Record the distance from the edge of the upper landing to where completion of the tape measure rests on the landing at the bottom of the stairs.
Measurement 2: Measure from the edge of the upper landing (like Measurement 1) to the edge of the very first stair’s tread at the bottom.
Measurement 3: Measure the width of your stair’s treads.
Measurement: Measure from the edge of the very first stair at the bottom to the wall (or door), if there is one.
Measurement 5 through 7 Measurements 5-7: These are the tread measurements.
Measurement 8: Measure from the top step to the nearby door, wall or other obstruction at the top of the stairs.
The Benefits of Stair Lifts for Senior Citizens In Riverton Wyoming
Outside stair lift Limited movement is a concern for numerous senior citizens and a concern for their families in Riverton. Seniors who want to remain in their homes and stay independent can improve their movement and stay safe by installing a stair lift.
A stair lift can carry you or a loved one securely from one floor to another in the house. A stair lift can provide a safe means of transport so that you will not have to stress over the risks of falling on the stairs. It is a specifically excellent alternative for a senior who lives alone.
3 Important Utilizes for Heavy-Duty Stair Lifts In Riverton
Stair lifts come in a variety of sizes and capacities. Compact models accommodate and offer movement for narrow staircases, supporting up to 350 pounds while doing so, and at the other end, durable stair lifts use a larger seat and can handle a greater series of body types.
1. You Can Supply Access to Almost Everyone
Because of the bigger, stronger design, the stair lift provides availability and enhances movement for anyone who’s heavier than average. However, the normal stair lift might be too narrow or too short for some, and as the heavy-duty design uses a larger, greater seat, it further accommodates anybody who’s taller than average or has trouble easily using a standard model.
2. Industrial Applications
While not needed to meet ADA requirements, stair lifts provide an added convenience to those with mobility issues.
Within Riverton a house, a standard lift might accommodate two average-sized adults, however what about when you have to handle the public? Your client base, customers, and patients likely been available in a variety of shapes and sizes, so the durable model basically suits everybody who would need to utilize the stairs.
Be aware that, to set up a durable lift, any staircase should provide 36 inches of space.
3. For Numerous Household Members
Exactly what takes place, however, when multiple family members require accessibility? Whether you’re meeting a present requirement or preparing for a future one, installing a bigger lift takes everyone’s physical requirements into consideration. If your home’s geared up with adequate space, take precautions by having a sturdy lift installed.
Call Us Now 844-561-5857 For A No Obligation Quote