Wheelchair Lift Ripley WV
How Stair Lifts Work
A stair lift is essentially a chair that travels along and rail or track that is installed to a stairway.
There is a motor within the base of the chair that is typically powered by a battery also within the base of the chair. The stair lift motor turns a gear that is meshed into a geared strip on the track or rail. When the gear turns the chair is moved along the geared strip. When the motor turns the gear the chair moves one direction, when the motor’s direction is reversed the chair moves the opposite way.
Call/Send switches are utilized to move the stair lift chair without anyone being on it. This is particularly helpful if two people use the lift and the lift is at the opposite end of the track when a user wants to utilize it. the user merely calls the lift to come to them using a call/send switch. Another use of call/send switch is to send the lift away after usage. Some individuals do not like the appearance of the lift parked in the main living area of the home in Ripley and will send it to the opposite end when not in use. They simply call it back when needed.
Stair Lift Parts
Although the design and style of stair lifts will vary between producers they all have some basic components common to them all:
Track or Rail – The stair lift track supports the chair, offers a mechanism (generally a geared strip) to move the chair and guides it up and down the stairs just as a train track guides a train.
Track Overruns – Some stair lifts provide the choice of an overrun at either the top of the track, bottom of the track or both. The purpose of a stair lift track overrun is to move the user far from the staircase to safely access or dismount the stair lift in an area where, if they fall, they will not fall on the stairs.
Power supply – While most stair lifts are battery ran today all model will require a power supply to either charge the battery or power the unit directly when it comes to non-battery powered systems. Non-battery powered stair lifts draw a lot of power and usually require a devoted circuit.
Call/Send Controls – Call/Send controls are generally mounted on the wall near each end of the stair lift track to offer a method for a user to call the chair to them or send it away when not needed. They can be either cordless or wired to the lift depending upon the design.
Seat – The stair lift seat is simply a seat for the user to rest on while using the lift. Depending upon the model it may swivel at the top and/or bottom of the track and will normally fold out of the way when not in use.
Seat Belt – As in a car the stair lift safety belt is meant to hold the user safely seated on the seat while the lift is in use.
Foot Rest – The foot remainder of the stair lift is a security feature to prevent the the users feet from striking the steps while using the lift and a comfort function to support the user’s feet when resting on the seat. The foot rest will have switches constructed into them to stop the lift needs to it hit anything on the stairway and will flip up out of the way when the lift is not in use.
Motor – The motor that drives a stair lift chair along the track is found in the base of the seat.
Transmission – Because the motor rotates at too high a speed to safely propel the stair lift the track at kind of transmission is used to reduce the speed while increasing the power readily available.
Battery Battery charger – Battery powered stair lifts should have a battery charger of some sort to keep the battery charged. The chargers are typically found under the track or near one end of the track. The battery charger works instantly without any action required by the user.
Battery – The batteries used in stair lifts are relatively expensive and found within the base of the seat near the motor. They will need to be changed at some time but their life expectancy is measured in years and thier replacement need to not be a big concern.
The Best Ways To Measure For Your Wheelchair Stair Lift Setup In Ripley
Measurement 1: Stand at the top of stairs and extend the tape measure down to the landing, letting it rest on edge of each tread. The tape needs to not sag or flex along the way. Record the distance from the edge of the upper landing to where completion of the tape measure rests on the landing at the bottom of the stairs.
Measurement 2: Measure from the edge of the upper landing (like Measurement 1) to the edge of the very first stair’s tread at the bottom.
Measurement 3: Measure the width of your stair’s treads.
Measurement: Measure from the edge of the very first stair at the bottom to the wall (or door), if there is one.
Measurement 5 through 7 Measurements 5-7: These are the tread measurements.
Measurement 8: Measure from the top step to the nearby door, wall or other obstruction at the top of the stairs.
The Advantages of Stair Lifts for Seniors In Ripley West Virginia
Outdoor stair lift Limited mobility is an issue for numerous senior citizens and an issue for their families in Ripley. Senior citizens who wish to stay in their houses and stay independent can enhance their mobility and remain safe by setting up a stair lift.
A stair lift can transport you or a loved one securely from one floor to another at home. A stair lift can supply a safe ways of transport so that you will no longer need to worry about the dangers of falling on the stairs. It is a specifically good choice for a senior who lives alone.
3 Important Utilizes for Heavy-Duty Stair Lifts In Ripley
Stair lifts been available in a range of sizes and capacities. Compact models accommodate and supply mobility for narrow staircases, supporting up to 350 pounds at the same time, and at the other end, heavy-duty stair lifts provide a broader seat and can handle a higher series of body types.
1. You Can Offer Access to Almost Everyone
Because of the larger, more powerful design, the stair lift supplies availability and improves movement for anybody who’s much heavier than average. However, the typical stair lift might be too narrow or too short for some, and as the durable design offers a bigger, greater seat, it further accommodates anyone who’s taller than average or has problem easily using a standard design.
2. Commercial Applications
While not needed to fulfill ADA standards, stair lifts offer an added benefit to those with movement concerns.
Within Ripley a home, a standard lift might accommodate 2 average-sized adults, but what about when you need to deal with the public? Your client base, customers, and patients most likely can be found in a range of shapes and sizes, so the sturdy model essentially matches everybody who would need to use the stairs.
Understand that, to install a sturdy lift, any staircase should provide 36 inches of space.
3. For Numerous Household Members
What occurs, however, when multiple family members need accessibility? Whether you’re fulfilling an existing need or anticipating a future one, installing a larger lift takes everybody’s physical needs into consideration. If your house’s equipped with enough space, take precautions by having a heavy-duty lift set up.
Call Us Now 844-561-5857 For A No Obligation Quote