Wheelchair Lift Rexford NY
How Stair Lifts Work
A stair lift is basically a chair that travels along and rail or track that is installed to a staircase.
There is a motor within the base of the chair that is usually powered by a battery also within the base of the chair. The stair lift motor turns a gear that is meshed into a geared strip on the track or rail. When the gear turns the chair is moved along the geared strip. When the motor turns the gear the chair moves one direction, when the motor’s direction is reversed the chair moves the opposite way.
Call/Send switches are utilized to move the stair lift chair without anybody being on it. This is particularly handy if 2 people utilize the lift and the lift is at the opposite end of the track when a user wants to use it. the user just calls the lift to come to them utilizing a call/send switch. Another use of call/send switch is to send the lift away after use. Some people do not like the appearance of the lift parked in the main living area of the home in Rexford and will send it to the opposite end when not in use. They simply call it back when required.
Stair Lift Parts
Although the design and style of stair lifts will vary between manufacturers they all have some basic components typical to them all:
Track or Rail – The stair lift track supports the chair, supplies a mechanism (normally a geared strip) to propel the chair and guides it up and down the stairs just as a train track guides a train.
Track Overruns – Some stair lifts provide the alternative of an overrun at either the top of the track, bottom of the track or both. The purpose of a stair lift track overrun is to move the user away from the stairway to safely access or dismount the stair lift in a place where, if they fall, they will not fall on the stairs.
Power supply – While most stair lifts are battery operated today all model will require a power supply to either charge the battery or power the unit straight when it comes to non-battery powered units. Non-battery powered stair lifts draw a lot of power and generally require a dedicated circuit.
Call/Send Controls – Call/Send controls are normally mounted on the wall near each end of the stair lift track to offer a way for a user to call the chair to them or send it away when not required. They can be either cordless or wired to the lift depending on the design.
Seat – The stair lift seat is merely a seat for the user to rest on while using the lift. Depending on the model it might rotate at the top and/or bottom of the track and will usually fold out of the way when not in use.
Seat Belt – As in a car the stair lift safety belt is intended to hold the user safely seated on the seat while the lift remains in usage.
Foot Rest – The foot remainder of the stair lift is a safety feature to prevent the the users feet from hitting the steps while utilizing the lift and a comfort function to support the user’s feet when resting on the seat. The foot rest will have switches constructed into them to stop the lift should it hit anything on the staircase and will flip up out of the way when the lift is not in use.
Motor – The motor that drives a stair lift chair along the track is found in the base of the seat.
Transmission – Due to the fact that the motor rotates at expensive a speed to securely move the stair lift the track at kind of transmission is used to minimize the speed while increasing the power offered.
Battery Battery charger – Battery powered stair lifts should have a charger of some sort to keep the battery charged. The battery chargers are generally found under the track or near one end of the track. The battery charger works automatically with no action needed by the user.
Battery – The batteries used in stair lifts are relatively expensive and found within the base of the seat near the motor. They will need to be replaced at some time but their life span is measured in years and thier replacement need to not be a big issue.
The Best Ways To Measure For Your Wheelchair Stair Lift Setup In Rexford
Measurement 1: Stand at the top of stairs and extend the measuring tape down to the landing, letting it rest on edge of each tread. The tape ought to not droop or flex along the way. Record the distance from the edge of the upper landing to where the end of the measuring tape rests on the landing at the bottom of the stairs.
Measurement 2: Measure from the edge of the upper landing (like Measurement 1) to the edge of the first stair’s tread at the bottom.
Measurement 3: Determine the width of your stair’s treads.
Measurement: Measure from the edge of the first stair at the bottom to the wall (or door), if there is one.
Measurement 5 through 7 Measurements 5-7: These are the tread measurements.
Measurement 8: Measure from the top step to the nearby door, wall or other obstruction at the top of the stairs.
The Advantages of Stair Lifts for Senior Citizens In Rexford New York
Outdoor stair lift Limited movement is an issue for lots of senior citizens and a concern for their families in Rexford. Elderly people who wish to remain in their houses and remain independent can enhance their movement and remain safe by setting up a stair lift.
A stair lift can transfer you or a loved one securely from one floor to another in the house. A stair lift can provide a safe means of transportation so that you will not need to fret about the dangers of falling on the stairs. It is a particularly good choice for a senior citizen who lives alone.
3 Necessary Utilizes for Heavy-Duty Stair Lifts In Rexford
Stair lifts come in a series of sizes and capacities. Compact models accommodate and offer mobility for narrow staircases, supporting up to 350 pounds at the same time, and at the other end, sturdy stair lifts offer a wider seat and can manage a higher series of body types.
1. You Can Supply Access to Almost Everyone
Because of the bigger, stronger design, the stair lift offers accessibility and enhances mobility for anybody who’s much heavier than average. Nevertheless, the normal stair lift might be too narrow or too short for some, and as the heavy-duty design offers a larger, greater seat, it further accommodates anybody who’s taller than average or has trouble comfortably utilizing a basic model.
2. Commercial Applications
While not needed to satisfy ADA requirements, stair lifts offer an added convenience to those with mobility problems.
Within Rexford a home, a standard lift might accommodate two average-sized adults, however what about when you have to handle the general public? Your client base, customers, and patients most likely been available in a variety of shapes and sizes, so the heavy-duty model basically matches everyone who would have to use the stairs.
Know that, to install a heavy-duty lift, any staircase needs to offer 36 inches of space.
3. For Several Family Members
Exactly what occurs, though, when numerous member of the family need availability? Whether you’re fulfilling a current requirement or preparing for a future one, setting up a bigger lift takes everybody’s physical requirements into consideration. If your house’s equipped with enough space, take safety measures by having a heavy-duty lift set up.
Call Us Now 844-561-5857 For A No Obligation Quote