Wheelchair Lift Rensselaer NY

Wheelchair Lift Rensselaer

How Stair Lifts Work

A stair lift is essentially a chair that travels along and rail or track that is mounted to a stairway.

There is a motor within the base of the chair that is generally powered by a battery also within the base of the chair. The stair lift motor turns a gear that is meshed into a geared strip on the track or rail. When the gear turns the chair is moved along the geared strip. When the motor turns the gear the chair moves one direction, when the motor’s direction is reversed the chair moves the opposite way.

Call/Send switches are used to move the stair lift chair without anybody being on it. This is especially practical if two individuals utilize the lift and the lift is at the opposite end of the track when a user wants to use it. the user just calls the lift to come to them using a call/send switch. Another use of call/send switch is to send the lift away after use. Some people don’t like the look of the lift parked in the main living area of the house in Rensselaer and will send it to the opposite end when not in use. They simply call it back when needed.

Stair Lift Components

Although the design and style of stair lifts will vary between makers they all have some fundamental components typical to them all:

Track or Rail – The stair lift track supports the chair, offers a mechanism (generally a geared strip) to propel the chair and guides it up and down the stairs just as a train track guides a train.

Track Overruns – Some stair lifts offer the option of an overrun at either the top of the track, bottom of the track or both. The function of a stair lift track overrun is to move the user away from the stairway to securely access or dismount the stair lift in an area where, if they fall, they will not fall on the stairs.

Power supply – While a lot of stair lifts are battery ran today all model will need a power supply to either charge the battery or power the unit directly in the case of non-battery powered systems. Non-battery powered stair lifts draw a lot of power and usually need a dedicated circuit.

Call/Send Controls – Call/Send controls are generally installed on the wall near each end of the stair lift track to provide a way for a user to call the chair to them or send it away when not needed. They can be either cordless or wired to the lift depending upon the design.

Seat – The stair lift seat is just a seat for the user to rest on while using the lift. Depending on the model it may swivel at the top and/or bottom of the track and will generally fold out of the way when not in use.

Seat Belt – As in a vehicle the stair lift seat belt is intended to hold the user securely seated on the seat while the lift remains in usage.

Foot Rest – The foot rest of the stair lift is a security feature to prevent the the users feet from striking the steps while using the lift and a comfort feature to support the user’s feet when sitting on the seat. The foot rest will have switches built into them to stop the lift ought to it hit anything on the staircase and will flip up out of the way when the lift is not in use.

Motor – The motor that drives a stair lift chair along the track is found in the base of the seat.

Transmission – Since the motor rotates at expensive a speed to securely move the stair lift the track at type of transmission is employed to minimize the speed while increasing the power offered.

Battery Charger – Battery powered stair lifts should have a charger of some sort to keep the battery charged. The battery chargers are typically found under the track or near one end of the track. The charger works immediately with no action needed by the user.

Battery – The batteries utilized in stair lifts are fairly costly and found within the base of the seat near the motor. They will need to be replaced at some time however their life expectancy is measured in years and thier replacement should not be a big issue.

Ways To Measure For Your Wheelchair Stair Lift Setup In Rensselaer

Measurement 1: Stand at the top of stairs and extend the tape measure down to the landing, letting it rest on edge of each tread. The tape should not sag or flex along the way. Record the distance from the edge of the upper landing to where completion of the tape measure rests on the landing at the bottom of the stairs.

Measurement 2: Measure from the edge of the upper landing (like Measurement 1) to the edge of the first stair’s tread at the bottom.

Measurement 3: Determine the width of your stair’s treads.

Measurement: Measure from the edge of the very first stair at the bottom to the wall (or door), if there is one.

Measurement 5 through 7 Measurements 5-7: These are the tread measurements.

Measurement 8: Measure from the top step to the closest door, wall or other obstruction at the top of the stairs.

chair lift Rensselaer

The Benefits of Stair Lifts for Senior Citizens In Rensselaer New York

Outdoor stair lift Limited mobility is an issue for numerous seniors and a concern for their families in Rensselaer. Seniors who want to remain in their houses and remain independent can enhance their movement and stay safe by setting up a stair lift.

A stair lift can carry you or a loved one securely from one floor to another in your home. A stair lift can supply a safe ways of transport so that you will no longer have to stress over the threats of falling on the stairs. It is a particularly excellent choice for a senior citizen who lives alone.

3 Necessary Utilizes for Heavy-Duty Stair Lifts In Rensselaer

Stair lifts can be found in a range of sizes and capacities. Compact models accommodate and offer movement for narrow staircases, supporting up to 350 pounds at the same time, and at the other end, sturdy stair lifts offer a larger seat and can manage a higher range of body types.

1. You Can Provide Access to Almost Everybody

Because of the bigger, stronger design, the stair lift provides availability and improves movement for anyone who’s heavier than average. However, the normal stair lift might be too narrow or too short for some, and as the heavy-duty design uses a larger, higher seat, it even more accommodates anybody who’s taller than average or has trouble easily using a standard design.

2. Industrial Applications

While not needed to satisfy ADA standards, stair lifts provide an added benefit to those with mobility concerns.

Within Rensselaer a house, a standard lift might accommodate 2 average-sized adults, but exactly what about when you have to handle the general public? Your client base, clients, and patients most likely can be found in a variety of sizes and shapes, so the sturdy model basically fits everyone who would need to use the stairs.

Understand that, to set up a heavy-duty lift, any staircase needs to supply 36 inches of room.

3. For Multiple Family Members

Exactly what happens, though, when several family members need accessibility? Whether you’re fulfilling a present need or anticipating a future one, setting up a bigger lift takes everybody’s physical needs into consideration. If your house’s equipped with sufficient area, take precautions by having a durable lift installed.

Call Us Now 844-561-5857 For A No Obligation Quote