Wheelchair Lift Pittsville WI
How Stair Lifts Work
A stair lift is basically a chair that travels along and rail or track that is installed to a stairs.
There is a motor within the base of the chair that is normally powered by a battery also within the base of the chair. The stair lift motor turns a gear that is meshed into a geared strip on the track or rail. When the gear turns the chair is moved along the geared strip. When the motor turns the gear the chair moves one direction, when the motor’s direction is reversed the chair moves the opposite way.
Call/Send switches are utilized to move the stair lift chair without anybody being on it. This is particularly valuable if two individuals use the lift and the lift is at the opposite end of the track when a user wishes to use it. the user just calls the lift to come to them utilizing a call/send switch. Another use of call/send switch is to send out the lift away after use. Some individuals don’t like the appearance of the lift parked in the main living area of the home in Pittsville and will send it to the opposite end when not in use. They merely call it back when needed.
Stair Lift Components
Although the design and style of stair lifts will vary between producers they all have some fundamental parts common to them all:
Track or Rail – The stair lift track supports the chair, provides a system (generally a geared strip) to move the chair and guides it up and down the stairs just as a train track guides a train.
Track Overruns – Some stair lifts use the alternative of an overrun at either the top of the track, bottom of the track or both. The purpose of a stair lift track overrun is to move the user away from the stairs to safely access or dismount the stair lift in a place where, if they fall, they won’t fall on the stairs.
Power supply – While the majority of stair lifts are battery ran today all model will require a power supply to either charge the battery or power the unit directly when it comes to non-battery powered systems. Non-battery powered stair lifts draw a lot of power and generally need a dedicated circuit.
Call/Send Controls – Call/Send controls are normally mounted on the wall near each end of the stair lift track to supply a way for a user to call the chair to them or send it away when not required. They can be either wireless or wired to the lift depending on the model.
Seat – The stair lift seat is merely a seat for the user to sit on while utilizing the lift. Depending upon the model it might swivel at the top and/or bottom of the track and will generally fold out of the way when not in use.
Seat Belt – As in an automobile the stair lift safety belt is intended to hold the user safely seated on the seat while the lift is in use.
Foot Rest – The foot rest of the stair lift is a security feature to prevent the the users feet from hitting the steps while using the lift and a comfort function to support the user’s feet when resting on the seat. The foot rest will have switches developed into them to stop the lift must it strike anything on the stairway and will turn up out of the way when the lift is not in use.
Motor – The motor that drives a stair lift chair along the track is found in the base of the seat.
Transmission – Due to the fact that the motor turns at expensive a speed to securely move the stair lift the track at kind of transmission is used to minimize the speed while increasing the power offered.
Battery Charger – Battery powered stair lifts need to have a battery charger of some sort to keep the battery charged. The battery chargers are usually found under the track or near one end of the track. The charger works automatically without any action needed by the user.
Battery – The batteries used in stair lifts are fairly expensive and found within the base of the seat near the motor. They will need to be replaced at some time however their life span is determined in years and thier replacement should not be a big concern.
Ways To Measure For Your Wheelchair Stair Lift Installation In Pittsville
Measurement 1: Stand at the top of stairs and extend the tape measure down to the landing, letting it rest on edge of each tread. The tape needs to not sag or bend along the way. Record the distance from the edge of the upper landing to where the end of the measuring tape rests on the landing at the bottom of the stairs.
Measurement 2: Measure from the edge of the upper landing (like Measurement 1) to the edge of the first stair’s tread at the bottom.
Measurement 3: Measure the width of your stair’s treads.
Measurement: Measure from the edge of the very first stair at the bottom to the wall (or door), if there is one.
Measurement 5 through 7 Measurements 5-7: These are the tread measurements.
Measurement 8: Measure from the top step to the nearest door, wall or other obstruction at the top of the stairs.
The Advantages of Stair Lifts for Seniors In Pittsville Wisconsin
Outdoor stair lift Limited mobility is an issue for lots of seniors and an issue for their families in Pittsville. Elderly people who wish to stay in their homes and remain independent can improve their movement and remain safe by installing a stair lift.
A stair lift can transfer you or a loved one safely from one floor to another in the house. A stair lift can supply a safe means of transportation so that you will not need to stress over the dangers of falling on the stairs. It is a particularly good alternative for a senior who lives alone.
3 Essential Uses for Heavy-Duty Stair Lifts In Pittsville
Stair lifts can be found in a series of sizes and capacities. Compact models accommodate and supply movement for narrow staircases, supporting approximately 350 pounds in the process, and at the other end, sturdy stair lifts offer a wider seat and can handle a higher range of body types.
1. You Can Provide Access to Nearly Everyone
Because of the bigger, stronger design, the stair lift offers accessibility and improves mobility for anyone who’s heavier than average. Nevertheless, the common stair lift might be too narrow or too short for some, and as the sturdy design uses a larger, greater seat, it even more accommodates anyone who’s taller than average or has trouble easily using a standard model.
2. Industrial Applications
While not had to fulfill ADA standards, stair lifts offer an added convenience to those with movement concerns.
Within Pittsville a house, a basic lift might accommodate 2 average-sized adults, but what about when you need to handle the public? Your customer base, customers, and patients most likely been available in a series of sizes and shapes, so the durable model basically suits everyone who would have to use the stairs.
Understand that, to install a heavy-duty lift, any staircase must provide 36 inches of space.
3. For Several Family Members
What occurs, however, when multiple member of the family require accessibility? Whether you’re meeting an existing requirement or preparing for a future one, installing a larger lift takes everybody’s physical requirements into consideration. If your home’s equipped with enough space, take preventative measures by having a sturdy lift set up.
Call Us Now 844-561-5857 For A No Obligation Quote