Wheelchair Lift Phoenix NY

Wheelchair Lift Phoenix

How Stair Lifts Work

A stair lift is essentially a chair that travels along and rail or track that is installed to a stairs.

There is a motor within the base of the chair that is typically powered by a battery also within the base of the chair. The stair lift motor turns a gear that is meshed into a geared strip on the track or rail. When the gear turns the chair is moved along the geared strip. When the motor turns the gear the chair moves one direction, when the motor’s direction is reversed the chair moves the opposite way.

Call/Send switches are utilized to move the stair lift chair without anybody being on it. This is especially helpful if 2 people utilize the lift and the lift is at the opposite end of the track when a user wishes to use it. the user just calls the lift to come to them using a call/send switch. Another use of call/send switch is to send out the lift away after usage. Some people don’t like the appearance of the lift parked in the main living area of the house in Phoenix and will send it to the opposite end when not in use. They just call it back when required.

Stair Lift Components

Although the design and style of stair lifts will vary between producers they all have some basic elements typical to them all:

Track or Rail – The stair lift track supports the chair, supplies a mechanism (normally a geared strip) to move the chair and guides it up and down the staircase just as a train track guides a train.

Track Overruns – Some stair lifts offer the alternative of an overrun at either the top of the track, bottom of the track or both. The purpose of a stair lift track overrun is to move the user far from the stairway to safely access or dismount the stair lift in a place where, if they fall, they won’t fall on the stairs.

Power supply – While many stair lifts are battery ran today all model will need a power supply to either charge the battery or power the system straight when it comes to non-battery powered units. Non-battery powered stair lifts draw a lot of power and typically need a dedicated circuit.

Call/Send Controls – Call/Send controls are typically installed on the wall near each end of the stair lift track to offer a method for a user to call the chair to them or send it away when not required. They can be either cordless or wired to the lift depending on the model.

Seat – The stair lift seat is merely a seat for the user to sit on while using the lift. Depending upon the model it might swivel at the top and/or bottom of the track and will generally fold out of the way when not in use.

Seat Belt – As in a vehicle the stair lift seat belt is meant to hold the user securely seated on the seat while the lift is in use.

Foot Rest – The foot remainder of the stair lift is a safety function to prevent the the users feet from striking the steps while utilizing the lift and a comfort function to support the user’s feet when sitting on the seat. The foot rest will have switches constructed into them to stop the lift ought to it strike anything on the staircase and will flip up out of the way when the lift is not in use.

Motor – The motor that drives a stair lift chair along the track is found in the base of the seat.

Transmission – Due to the fact that the motor turns at too high a speed to safely move the stair lift the track at type of transmission is utilized to reduce the speed while increasing the power readily available.

Battery Battery charger – Battery powered stair lifts need to have a charger of some sort to keep the battery charged. The chargers are typically found under the track or near one end of the track. The battery charger works instantly with no action required by the user.

Battery – The batteries utilized in stair lifts are fairly costly and found within the base of the seat near the motor. They will need to be changed at some time but their life expectancy is measured in years and thier replacement ought to not be a huge issue.

How To Measure For Your Wheelchair Stair Lift Installation In Phoenix

Measurement 1: Stand at the top of stairs and extend the measuring tape down to the landing, letting it rest on edge of each tread. The tape must not sag or bend along the way. Record the distance from the edge of the upper landing to where completion of the measuring tape rests on the landing at the bottom of the stairs.

Measurement 2: Measure from the edge of the upper landing (like Measurement 1) to the edge of the very first stair’s tread at the bottom.

Measurement 3: Determine the width of your stair’s treads.

Measurement: Measure from the edge of the first stair at the bottom to the wall (or door), if there is one.

Measurement 5 through 7 Measurements 5-7: These are the tread measurements.

Measurement 8: Measure from the top step to the nearest door, wall or other obstruction at the top of the stairs.

chair lift Phoenix

The Advantages of Stair Lifts for Senior Citizens In Phoenix New York

Outdoor stair lift Limited mobility is an issue for lots of seniors and an issue for their families in Phoenix. Senior citizens who wish to remain in their homes and remain independent can enhance their movement and remain safe by setting up a stair lift.

A stair lift can carry you or a loved one securely from one floor to another at home. A stair lift can supply a safe means of transportation so that you will no longer have to worry about the threats of falling on the stairs. It is a particularly good option for an elderly person who lives alone.

3 Necessary Utilizes for Heavy-Duty Stair Lifts In Phoenix

Stair lifts been available in a series of sizes and capacities. Compact models accommodate and provide mobility for narrow staircases, supporting up to 350 pounds while doing so, and at the other end, sturdy stair lifts offer a larger seat and can deal with a higher variety of body types.

1. You Can Offer Access to Nearly Everyone

Because of the larger, more powerful design, the stair lift provides availability and improves mobility for anyone who’s heavier than average. However, the common stair lift might be too narrow or too short for some, and as the sturdy design offers a bigger, greater seat, it even more accommodates anybody who’s taller than average or has difficulty conveniently using a standard model.

2. Industrial Applications

While not needed to satisfy ADA requirements, stair lifts provide an added convenience to those with mobility issues.

Within Phoenix a home, a standard lift might accommodate 2 average-sized adults, but exactly what about when you need to handle the public? Your customer base, clients, and patients likely come in a series of shapes and sizes, so the durable model basically matches everyone who would need to use the stairs.

Understand that, to set up a sturdy lift, any staircase needs to supply 36 inches of room.

3. For Multiple Family Members

Exactly what takes place, though, when several member of the family require accessibility? Whether you’re satisfying a current need or expecting a future one, setting up a bigger lift takes everybody’s physical needs into consideration. If your home’s equipped with adequate space, take preventative measures by having a durable lift installed.

Call Us Now 844-561-5857 For A No Obligation Quote