Wheelchair Lift Phillips WI
How Stair Lifts Work
A stair lift is essentially a chair that travels along and rail or track that is mounted to a stairway.
There is a motor within the base of the chair that is typically powered by a battery also within the base of the chair. The stair lift motor turns a gear that is meshed into a geared strip on the track or rail. When the gear turns the chair is moved along the geared strip. When the motor turns the gear the chair moves one direction, when the motor’s direction is reversed the chair moves the opposite way.
Call/Send switches are used to move the stair lift chair without anybody being on it. This is especially handy if two individuals utilize the lift and the lift is at the opposite end of the track when a user wishes to use it. the user just calls the lift to come to them utilizing a call/send switch. Another use of call/send switch is to send the lift away after usage. Some individuals don’t like the appearance of the lift parked in the main living area of the home in Phillips and will send it to the opposite end when not in use. They simply call it back when needed.
Stair Lift Components
Although the design and style of stair lifts will vary between producers they all have some fundamental components common to them all:
Track or Rail – The stair lift track supports the chair, offers a mechanism (typically a geared strip) to propel the chair and guides it up and down the stairway just as a train track guides a train.
Track Overruns – Some stair lifts use the choice of an overrun at either the top of the track, bottom of the track or both. The function of a stair lift track overrun is to move the user far from the stairs to securely access or dismount the stair lift in a location where, if they fall, they won’t fall on the stairs.
Power supply – While many stair lifts are battery ran today all model will need a power supply to either charge the battery or power the system directly when it comes to non-battery powered systems. Non-battery powered stair lifts draw a lot of power and normally need a dedicated circuit.
Call/Send Controls – Call/Send controls are generally mounted on the wall near each end of the stair lift track to offer a way for a user to call the chair to them or send it away when not needed. They can be either wireless or wired to the lift depending upon the model.
Seat – The stair lift seat is merely a seat for the user to sit on while using the lift. Depending on the model it might rotate at the top and/or bottom of the track and will normally fold up out of the way when not in use.
Seat Belt – As in a car the stair lift safety belt is planned to hold the user securely seated on the seat while the lift is in usage.
Foot Rest – The foot remainder of the stair lift is a safety function to prevent the the users feet from hitting the steps while using the lift and a comfort feature to support the user’s feet when sitting on the seat. The foot rest will have switches built into them to stop the lift ought to it hit anything on the staircase and will turn up out of the way when the lift is not in use.
Motor – The motor that drives a stair lift chair along the track is found in the base of the seat.
Transmission – Because the motor turns at too high a speed to safely propel the stair lift the track at kind of transmission is utilized to decrease the speed while increasing the power available.
Battery Charger – Battery powered stair lifts should have a charger of some sort to keep the battery charged. The battery chargers are usually found under the track or near one end of the track. The battery charger works instantly with no action needed by the user.
Battery – The batteries used in stair lifts are relatively expensive and found within the base of the seat near the motor. They will have to be replaced at some time however their life expectancy is measured in years and thier replacement should not be a huge concern.
The Best Ways To Measure For Your Wheelchair Stair Lift Setup In Phillips
Measurement 1: Stand at the top of stairs and extend the tape measure down to the landing, letting it rest on edge of each tread. The tape needs to not sag or flex along the way. Record the distance from the edge of the upper landing to where completion of the tape measure rests on the landing at the bottom of the stairs.
Measurement 2: Measure from the edge of the upper landing (like Measurement 1) to the edge of the first stair’s tread at the bottom.
Measurement 3: Measure the width of your stair’s treads.
Measurement: Measure from the edge of the first stair at the bottom to the wall (or door), if there is one.
Measurement 5 through 7 Measurements 5-7: These are the tread measurements.
Measurement 8: Measure from the top step to the nearest door, wall or other obstruction at the top of the stairs.
The Advantages of Stair Lifts for Senior Citizens In Phillips Wisconsin
Outdoor stair lift Limited mobility is an issue for numerous senior citizens and an issue for their families in Phillips. Seniors who wish to stay in their houses and remain independent can enhance their mobility and remain safe by installing a stair lift.
A stair lift can transport you or a loved one securely from one floor to another in the house. A stair lift can provide a safe ways of transport so that you will not need to fret about the threats of falling on the stairs. It is an especially excellent alternative for a senior who lives alone.
3 Vital Utilizes for Heavy-Duty Stair Lifts In Phillips
Stair lifts been available in a series of sizes and capacities. Compact models accommodate and supply mobility for narrow staircases, supporting up to 350 pounds while doing so, and at the other end, sturdy stair lifts provide a wider seat and can manage a greater range of body types.
1. You Can Provide Access to Nearly Everybody
Because of the larger, more powerful design, the stair lift provides ease of access and enhances movement for anyone who’s heavier than average. However, the typical stair lift might be too narrow or too short for some, and as the heavy-duty design uses a larger, greater seat, it even more accommodates anybody who’s taller than average or has problem comfortably utilizing a standard model.
2. Industrial Applications
While not needed to satisfy ADA standards, stair lifts supply an added benefit to those with mobility problems.
Within Phillips a home, a basic lift might accommodate 2 average-sized adults, but what about when you need to deal with the general public? Your customer base, clients, and patients most likely can be found in a series of sizes and shapes, so the heavy-duty model basically matches everybody who would need to utilize the stairs.
Know that, to set up a heavy-duty lift, any staircase must supply 36 inches of space.
3. For Several Family Members
Exactly what takes place, however, when multiple member of the family require ease of access? Whether you’re meeting a present requirement or preparing for a future one, setting up a bigger lift takes everybody’s physical needs into consideration. If your house’s equipped with adequate space, take safety measures by having a durable lift installed.
Call Us Now 844-561-5857 For A No Obligation Quote