Wheelchair Lift Lanett AL
How Stair Lifts Work
A stair lift is generally a chair that travels along and rail or track that is mounted to a stairs.
There is a motor within the base of the chair that is usually powered by a battery also within the base of the chair. The stair lift motor turns a gear that is meshed into a geared strip on the track or rail. When the gear turns the chair is moved along the geared strip. When the motor turns the gear the chair moves one direction, when the motor’s direction is reversed the chair moves the opposite way.
Call/Send switches are used to move the stair lift chair without anyone being on it. This is especially handy if two people use the lift and the lift is at the opposite end of the track when a user wishes to utilize it. the user simply calls the lift to come to them using a call/send switch. Another use of call/send switch is to send the lift away after use. Some individuals do not like the look of the lift parked in the main living area of the home in Lanett and will send it to the opposite end when not in use. They merely call it back when needed.
Stair Lift Parts
Although the design and style of stair lifts will vary between makers they all have some standard components common to them all:
Track or Rail – The stair lift track supports the chair, provides a system (generally a geared strip) to move the chair and guides it up and down the stairway just as a train track guides a train.
Track Overruns – Some stair lifts offer the alternative of an overrun at either the top of the track, bottom of the track or both. The purpose of a stair lift track overrun is to move the user far from the stairway to securely access or dismount the stair lift in a location where, if they fall, they will not fall on the stairs.
Power supply – While many stair lifts are battery ran today all model will need a power supply to either charge the battery or power the unit directly when it comes to non-battery powered systems. Non-battery powered stair lifts draw a lot of power and typically require a devoted circuit.
Call/Send Controls – Call/Send controls are normally mounted on the wall near each end of the stair lift track to provide a method for a user to call the chair to them or send it away when not needed. They can be either cordless or wired to the lift depending upon the model.
Seat – The stair lift seat is just a seat for the user to rest on while using the lift. Depending upon the model it might rotate at the top and/or bottom of the track and will usually fold up out of the way when not in use.
Seat Belt – As in a car the stair lift seat belt is intended to hold the user securely seated on the seat while the lift remains in usage.
Foot Rest – The foot rest of the stair lift is a safety function to prevent the the users feet from striking the steps while using the lift and a comfort feature to support the user’s feet when resting on the seat. The foot rest will have switches developed into them to stop the lift ought to it hit anything on the stairs and will flip up out of the way when the lift is not in use.
Motor – The motor that drives a stair lift chair along the track is found in the base of the seat.
Transmission – Because the motor turns at too high a speed to safely move the stair lift the track at kind of transmission is employed to minimize the speed while increasing the power readily available.
Battery Battery charger – Battery powered stair lifts should have a charger of some sort to keep the battery charged. The chargers are typically found under the track or near one end of the track. The battery charger works automatically with no action required by the user.
Battery – The batteries utilized in stair lifts are relatively pricey and found within the base of the seat near the motor. They will need to be changed at some time however their life span is determined in years and thier replacement should not be a big concern.
The Best Ways To Measure For Your Wheelchair Stair Lift Setup In Lanett
Measurement 1: Stand at the top of stairs and extend the tape measure down to the landing, letting it rest on edge of each tread. The tape must not sag or bend along the way. Record the distance from the edge of the upper landing to where the end of the tape measure rests on the landing at the bottom of the stairs.
Measurement 2: Measure from the edge of the upper landing (like Measurement 1) to the edge of the very first stair’s tread at the bottom.
Measurement 3: Determine the width of your stair’s treads.
Measurement: Measure from the edge of the very first stair at the bottom to the wall (or door), if there is one.
Measurement 5 through 7 Measurements 5-7: These are the tread measurements.
Measurement 8: Measure from the top step to the nearest door, wall or other obstruction at the top of the stairs.
The Advantages of Stair Lifts for Senior Citizens In Lanett Alabama
Outside stair lift Limited mobility is a concern for lots of senior citizens and a concern for their families in Lanett. Seniors who wish to remain in their houses and remain independent can improve their mobility and remain safe by setting up a stair lift.
A stair lift can transfer you or a loved one safely from one floor to another at home. A stair lift can offer a safe means of transportation so that you will not have to stress over the risks of falling on the stairs. It is a particularly excellent option for a senior who lives alone.
3 Necessary Uses for Heavy-Duty Stair Lifts In Lanett
Stair lifts can be found in a variety of sizes and capacities. Compact models accommodate and provide movement for narrow staircases, supporting as much as 350 pounds in the process, and at the other end, heavy-duty stair lifts provide a larger seat and can deal with a higher variety of body types.
1. You Can Supply Access to Nearly Everybody
Because of the bigger, more powerful design, the stair lift supplies ease of access and enhances mobility for anybody who’s much heavier than average. However, the typical stair lift might be too narrow or too short for some, and as the sturdy design uses a bigger, greater seat, it even more accommodates anyone who’s taller than average or has problem comfortably using a basic model.
2. Business Applications
While not needed to fulfill ADA requirements, stair lifts provide an added benefit to those with mobility problems.
Within Lanett a house, a basic lift might accommodate 2 average-sized adults, but what about when you need to handle the public? Your client base, clients, and patients likely been available in a series of sizes and shapes, so the durable model essentially matches everyone who would have to use the stairs.
Know that, to install a heavy-duty lift, any staircase should offer 36 inches of room.
3. For Multiple Family Members
Exactly what takes place, though, when several family members require accessibility? Whether you’re satisfying an existing requirement or preparing for a future one, setting up a bigger lift takes everyone’s physical needs into consideration. If your home’s equipped with adequate area, take safety measures by having a heavy-duty lift installed.
Call Us Now 844-561-5857 For A No Obligation Quote