Wheelchair Lift Kent NY

Wheelchair Lift Kent

How Stair Lifts Work

A stair lift is essentially a chair that travels along and rail or track that is mounted to a stairs.

There is a motor within the base of the chair that is typically powered by a battery also within the base of the chair. The stair lift motor turns a gear that is meshed into a geared strip on the track or rail. When the gear turns the chair is moved along the geared strip. When the motor turns the gear the chair moves one direction, when the motor’s direction is reversed the chair moves the opposite way.

Call/Send switches are used to move the stair lift chair without anyone being on it. This is especially useful if 2 individuals utilize the lift and the lift is at the opposite end of the track when a user wishes to utilize it. the user merely calls the lift to come to them utilizing a call/send switch. Another use of call/send switch is to send out the lift away after usage. Some people don’t like the appearance of the lift parked in the main living area of the house in Kent and will send it to the opposite end when not in use. They just call it back when needed.

Stair Lift Parts

Although the design and style of stair lifts will vary between producers they all have some fundamental elements typical to them all:

Track or Rail – The stair lift track supports the chair, offers a system (usually a geared strip) to propel the chair and guides it up and down the staircase just as a train track guides a train.

Track Overruns – Some stair lifts use the choice of an overrun at either the top of the track, bottom of the track or both. The function of a stair lift track overrun is to move the user far from the staircase to safely access or dismount the stair lift in a place where, if they fall, they won’t fall on the stairs.

Power supply – While the majority of stair lifts are battery ran today all model will need a power supply to either charge the battery or power the system straight when it comes to non-battery powered units. Non-battery powered stair lifts draw a lot of power and normally require a devoted circuit.

Call/Send Controls – Call/Send controls are usually installed on the wall near each end of the stair lift track to provide a way for a user to call the chair to them or send it away when not required. They can be either wireless or wired to the lift depending on the design.

Seat – The stair lift seat is simply a seat for the user to rest on while using the lift. Depending upon the model it might rotate at the top and/or bottom of the track and will typically fold out of the way when not in use.

Seat Belt – As in a car the stair lift safety belt is intended to hold the user safely seated on the seat while the lift is in use.

Foot Rest – The foot rest of the stair lift is a security feature to prevent the the users feet from striking the steps while utilizing the lift and a comfort function to support the user’s feet when sitting on the seat. The foot rest will have switches constructed into them to stop the lift must it hit anything on the stairs and will turn up out of the way when the lift is not in use.

Motor – The motor that drives a stair lift chair along the track is found in the base of the seat.

Transmission – Because the motor turns at expensive a speed to safely propel the stair lift the track at type of transmission is used to lower the speed while increasing the power readily available.

Battery Battery charger – Battery powered stair lifts need to have a battery charger of some sort to keep the battery charged. The chargers are normally found under the track or near one end of the track. The battery charger works instantly without any action needed by the user.

Battery – The batteries utilized in stair lifts are fairly expensive and found within the base of the seat near the motor. They will have to be replaced at some time but their life expectancy is measured in years and thier replacement should not be a huge issue.

The Best Ways To Measure For Your Wheelchair Stair Lift Installation In Kent

Measurement 1: Stand at the top of stairs and extend the measuring tape down to the landing, letting it rest on edge of each tread. The tape must not droop or flex along the way. Record the distance from the edge of the upper landing to where completion of the tape measure rests on the landing at the bottom of the stairs.

Measurement 2: Measure from the edge of the upper landing (like Measurement 1) to the edge of the very first stair’s tread at the bottom.

Measurement 3: Determine the width of your stair’s treads.

Measurement: Measure from the edge of the first stair at the bottom to the wall (or door), if there is one.

Measurement 5 through 7 Measurements 5-7: These are the tread measurements.

Measurement 8: Measure from the top step to the nearby door, wall or other obstruction at the top of the stairs.

chair lift Kent

The Advantages of Stair Lifts for Seniors In Kent New York

Outdoor stair lift Limited movement is an issue for many seniors and an issue for their families in Kent. Elderly people who wish to stay in their houses and stay independent can enhance their movement and remain safe by setting up a stair lift.

A stair lift can transport you or a loved one safely from one floor to another at home. A stair lift can provide a safe means of transportation so that you will no longer need to fret about the risks of falling on the stairs. It is an especially great alternative for a senior citizen who lives alone.

3 Necessary Uses for Heavy-Duty Stair Lifts In Kent

Stair lifts come in a series of sizes and capacities. Compact models accommodate and supply movement for narrow staircases, supporting as much as 350 pounds at the same time, and at the other end, sturdy stair lifts use a wider seat and can deal with a higher series of body types.

1. You Can Provide Access to Almost Everybody

Because of the larger, stronger design, the stair lift supplies availability and improves movement for anybody who’s much heavier than average. Nevertheless, the typical stair lift might be too narrow or too short for some, and as the sturdy design uses a larger, greater seat, it further accommodates anyone who’s taller than average or has trouble comfortably utilizing a basic model.

2. Business Applications

While not had to fulfill ADA standards, stair lifts provide an added convenience to those with movement issues.

Within Kent a home, a basic lift might accommodate two average-sized adults, however exactly what about when you have to deal with the public? Your customer base, customers, and patients likely come in a series of sizes and shapes, so the durable model essentially matches everyone who would have to utilize the stairs.

Be aware that, to install a durable lift, any staircase should provide 36 inches of space.

3. For Several Family Members

Exactly what happens, however, when numerous family members require availability? Whether you’re meeting a current need or preparing for a future one, setting up a larger lift takes everyone’s physical requirements into consideration. If your home’s geared up with enough area, take preventative measures by having a sturdy lift installed.

Call Us Now 844-561-5857 For A No Obligation Quote