Wheelchair Lift Jack AL
How Stair Lifts Work
A stair lift is basically a chair that travels along and rail or track that is mounted to a staircase.
There is a motor within the base of the chair that is usually powered by a battery also within the base of the chair. The stair lift motor turns a gear that is meshed into a geared strip on the track or rail. When the gear turns the chair is moved along the geared strip. When the motor turns the gear the chair moves one direction, when the motor’s direction is reversed the chair moves the opposite way.
Call/Send switches are utilized to move the stair lift chair without anybody being on it. This is especially helpful if 2 individuals use the lift and the lift is at the opposite end of the track when a user wishes to utilize it. the user simply calls the lift to come to them using a call/send switch. Another use of call/send switch is to send out the lift away after usage. Some people do not like the appearance of the lift parked in the main living area of the home in Jack and will send it to the opposite end when not in use. They simply call it back when needed.
Stair Lift Components
Although the design and style of stair lifts will vary between makers they all have some fundamental components typical to them all:
Track or Rail – The stair lift track supports the chair, supplies a mechanism (typically a geared strip) to move the chair and guides it up and down the stairway just as a train track guides a train.
Track Overruns – Some stair lifts offer the choice of an overrun at either the top of the track, bottom of the track or both. The function of a stair lift track overrun is to move the user far from the stairway to safely access or dismount the stair lift in a place where, if they fall, they will not fall on the stairs.
Power supply – While the majority of stair lifts are battery operated today all model will need a power supply to either charge the battery or power the unit directly in the case of non-battery powered units. Non-battery powered stair lifts draw a lot of power and normally require a devoted circuit.
Call/Send Controls – Call/Send controls are generally mounted on the wall near each end of the stair lift track to offer a method for a user to call the chair to them or send it away when not needed. They can be either cordless or wired to the lift depending on the model.
Seat – The stair lift seat is merely a seat for the user to sit on while utilizing the lift. Depending on the model it may rotate at the top and/or bottom of the track and will typically fold out of the way when not in use.
Seat Belt – As in a car the stair lift seat belt is planned to hold the user securely seated on the seat while the lift is in use.
Foot Rest – The foot rest of the stair lift is a security function to prevent the the users feet from hitting the steps while using the lift and a comfort feature to support the user’s feet when sitting on the seat. The foot rest will have switches developed into them to stop the lift needs to it strike anything on the staircase and will flip up out of the way when the lift is not in use.
Motor – The motor that drives a stair lift chair along the track is found in the base of the seat.
Transmission – Due to the fact that the motor turns at expensive a speed to safely propel the stair lift the track at type of transmission is utilized to lower the speed while increasing the power offered.
Battery Charger – Battery powered stair lifts should have a charger of some sort to keep the battery charged. The battery chargers are normally found under the track or near one end of the track. The battery charger works immediately without any action needed by the user.
Battery – The batteries used in stair lifts are relatively pricey and found within the base of the seat near the motor. They will have to be replaced at some time however their life span is measured in years and thier replacement ought to not be a huge concern.
How To Measure For Your Wheelchair Stair Lift Setup In Jack
Measurement 1: Stand at the top of stairs and extend the tape measure down to the landing, letting it rest on edge of each tread. The tape should not droop or bend along the way. Record the distance from the edge of the upper landing to where completion of the tape measure rests on the landing at the bottom of the stairs.
Measurement 2: Measure from the edge of the upper landing (like Measurement 1) to the edge of the very first stair’s tread at the bottom.
Measurement 3: Measure the width of your stair’s treads.
Measurement: Measure from the edge of the very first stair at the bottom to the wall (or door), if there is one.
Measurement 5 through 7 Measurements 5-7: These are the tread measurements.
Measurement 8: Measure from the top step to the nearby door, wall or other obstruction at the top of the stairs.
The Benefits of Stair Lifts for Seniors In Jack Alabama
Outdoor stair lift Limited movement is a problem for numerous senior citizens and an issue for their families in Jack. Elderly people who wish to stay in their houses and remain independent can improve their movement and stay safe by setting up a stair lift.
A stair lift can carry you or a loved one safely from one floor to another in the house. A stair lift can provide a safe means of transportation so that you will not need to worry about the threats of falling on the stairs. It is an especially excellent option for a senior citizen who lives alone.
3 Necessary Utilizes for Heavy-Duty Stair Lifts In Jack
Stair lifts been available in a variety of sizes and capacities. Compact models accommodate and supply movement for narrow staircases, supporting up to 350 pounds in the process, and at the other end, sturdy stair lifts provide a larger seat and can handle a higher range of body types.
1. You Can Provide Access to Almost Everyone
Because of the bigger, stronger design, the stair lift provides accessibility and enhances movement for anyone who’s much heavier than average. However, the normal stair lift might be too narrow or too short for some, and as the heavy-duty design provides a larger, greater seat, it even more accommodates anybody who’s taller than average or has difficulty comfortably utilizing a basic design.
2. Industrial Applications
While not had to satisfy ADA standards, stair lifts offer an added benefit to those with movement problems.
Within Jack a home, a basic lift might accommodate 2 average-sized adults, but what about when you have to deal with the public? Your client base, customers, and patients likely can be found in a range of shapes and sizes, so the heavy-duty model basically matches everyone who would need to use the stairs.
Know that, to set up a heavy-duty lift, any staircase should provide 36 inches of space.
3. For Numerous Family Members
Exactly what happens, however, when several family members require availability? Whether you’re satisfying a current requirement or expecting a future one, installing a larger lift takes everyone’s physical needs into consideration. If your house’s geared up with adequate area, take precautions by having a durable lift installed.
Call Us Now 844-561-5857 For A No Obligation Quote