Wheelchair Lift Hilbert WI
How Stair Lifts Work
A stair lift is basically a chair that travels along and rail or track that is mounted to a staircase.
There is a motor within the base of the chair that is usually powered by a battery also within the base of the chair. The stair lift motor turns a gear that is meshed into a geared strip on the track or rail. When the gear turns the chair is moved along the geared strip. When the motor turns the gear the chair moves one direction, when the motor’s direction is reversed the chair moves the opposite way.
Call/Send switches are used to move the stair lift chair without anyone being on it. This is especially useful if two people utilize the lift and the lift is at the opposite end of the track when a user wishes to use it. the user simply calls the lift to come to them using a call/send switch. Another use of call/send switch is to send the lift away after usage. Some people do not like the appearance of the lift parked in the main living area of the home in Hilbert and will send it to the opposite end when not in use. They merely call it back when required.
Stair Lift Parts
Although the design and style of stair lifts will vary between producers they all have some fundamental parts typical to them all:
Track or Rail – The stair lift track supports the chair, supplies a system (generally a geared strip) to move the chair and guides it up and down the stairs just as a train track guides a train.
Track Overruns – Some stair lifts offer the alternative of an overrun at either the top of the track, bottom of the track or both. The purpose of a stair lift track overrun is to move the user far from the stairway to safely access or dismount the stair lift in an area where, if they fall, they won’t fall on the stairs.
Power supply – While a lot of stair lifts are battery ran today all model will require a power supply to either charge the battery or power the system directly in the case of non-battery powered systems. Non-battery powered stair lifts draw a lot of power and usually need a devoted circuit.
Call/Send Controls – Call/Send controls are generally mounted on the wall near each end of the stair lift track to supply a way for a user to call the chair to them or send it away when not required. They can be either cordless or wired to the lift depending upon the design.
Seat – The stair lift seat is merely a seat for the user to rest on while using the lift. Depending on the model it may swivel at the top and/or bottom of the track and will usually fold up out of the way when not in use.
Seat Belt – As in a vehicle the stair lift seat belt is intended to hold the user securely seated on the seat while the lift remains in use.
Foot Rest – The foot rest of the stair lift is a safety function to prevent the the users feet from striking the steps while utilizing the lift and a comfort feature to support the user’s feet when sitting on the seat. The foot rest will have switches constructed into them to stop the lift must it strike anything on the staircase and will flip up out of the way when the lift is not in use.
Motor – The motor that drives a stair lift chair along the track is found in the base of the seat.
Transmission – Since the motor turns at too high a speed to securely propel the stair lift the track at kind of transmission is utilized to reduce the speed while increasing the power readily available.
Battery Battery charger – Battery powered stair lifts must have a battery charger of some sort to keep the battery charged. The battery chargers are generally found under the track or near one end of the track. The battery charger works immediately with no action required by the user.
Battery – The batteries used in stair lifts are fairly costly and found within the base of the seat near the motor. They will need to be replaced at some time but their life span is measured in years and thier replacement must not be a big concern.
How To Measure For Your Wheelchair Stair Lift Installation In Hilbert
Measurement 1: Stand at the top of stairs and extend the tape measure down to the landing, letting it rest on edge of each tread. The tape should not sag or flex along the way. Record the distance from the edge of the upper landing to where completion of the tape measure rests on the landing at the bottom of the stairs.
Measurement 2: Measure from the edge of the upper landing (like Measurement 1) to the edge of the first stair’s tread at the bottom.
Measurement 3: Determine the width of your stair’s treads.
Measurement: Measure from the edge of the first stair at the bottom to the wall (or door), if there is one.
Measurement 5 through 7 Measurements 5-7: These are the tread measurements.
Measurement 8: Measure from the top step to the nearby door, wall or other obstruction at the top of the stairs.
The Advantages of Stair Lifts for Senior Citizens In Hilbert Wisconsin
Outdoor stair lift Limited mobility is a concern for numerous seniors and an issue for their families in Hilbert. Elderly people who wish to remain in their homes and remain independent can enhance their movement and stay safe by setting up a stair lift.
A stair lift can transport you or a loved one safely from one floor to another in your home. A stair lift can offer a safe ways of transport so that you will not have to fret about the risks of falling on the stairs. It is a particularly good option for a senior who lives alone.
3 Essential Uses for Heavy-Duty Stair Lifts In Hilbert
Stair lifts can be found in a variety of sizes and capacities. Compact models accommodate and provide movement for narrow staircases, supporting up to 350 pounds at the same time, and at the other end, durable stair lifts provide a wider seat and can manage a greater variety of body types.
1. You Can Offer Access to Nearly Everybody
Because of the larger, more powerful design, the stair lift supplies availability and improves movement for anybody who’s heavier than average. Nevertheless, the typical stair lift might be too narrow or too short for some, and as the sturdy design provides a bigger, higher seat, it further accommodates anybody who’s taller than average or has difficulty comfortably utilizing a basic design.
2. Business Applications
While not needed to satisfy ADA requirements, stair lifts provide an added convenience to those with movement issues.
Within Hilbert a home, a standard lift might accommodate two average-sized adults, but what about when you need to handle the public? Your customer base, customers, and patients likely come in a series of sizes and shapes, so the heavy-duty model essentially matches everybody who would have to utilize the stairs.
Be aware that, to install a durable lift, any staircase must provide 36 inches of space.
3. For Multiple Family Members
Exactly what takes place, though, when several member of the family require ease of access? Whether you’re satisfying a present need or expecting a future one, setting up a larger lift takes everybody’s physical requirements into consideration. If your house’s equipped with sufficient area, take precautions by having a heavy-duty lift set up.
Call Us Now 844-561-5857 For A No Obligation Quote