Wheelchair Lift Glens Falls NY
How Stair Lifts Work
A stair lift is generally a chair that travels along and rail or track that is mounted to a stairway.
There is a motor within the base of the chair that is usually powered by a battery also within the base of the chair. The stair lift motor turns a gear that is meshed into a geared strip on the track or rail. When the gear turns the chair is moved along the geared strip. When the motor turns the gear the chair moves one direction, when the motor’s direction is reversed the chair moves the opposite way.
Call/Send switches are used to move the stair lift chair without anybody being on it. This is especially valuable if two people utilize the lift and the lift is at the opposite end of the track when a user wants to utilize it. the user just calls the lift to come to them utilizing a call/send switch. Another use of call/send switch is to send the lift away after usage. Some people don’t like the appearance of the lift parked in the main living area of the house in Glens Falls and will send it to the opposite end when not in use. They merely call it back when required.
Stair Lift Components
Although the design and style of stair lifts will vary between producers they all have some basic parts typical to them all:
Track or Rail – The stair lift track supports the chair, supplies a system (typically a geared strip) to propel the chair and guides it up and down the stairway just as a train track guides a train.
Track Overruns – Some stair lifts provide the option of an overrun at either the top of the track, bottom of the track or both. The purpose of a stair lift track overrun is to move the user far from the staircase to securely access or dismount the stair lift in an area where, if they fall, they will not fall on the stairs.
Power supply – While many stair lifts are battery ran today all model will need a power supply to either charge the battery or power the unit straight in the case of non-battery powered units. Non-battery powered stair lifts draw a lot of power and usually require a dedicated circuit.
Call/Send Controls – Call/Send controls are usually mounted on the wall near each end of the stair lift track to offer a way for a user to call the chair to them or send it away when not needed. They can be either wireless or wired to the lift depending upon the design.
Seat – The stair lift seat is merely a seat for the user to rest on while utilizing the lift. Depending on the model it may rotate at the top and/or bottom of the track and will typically fold up out of the way when not in use.
Seat Belt – As in a vehicle the stair lift seat belt is intended to hold the user securely seated on the seat while the lift remains in use.
Foot Rest – The foot rest of the stair lift is a security feature to prevent the the users feet from striking the steps while using the lift and a comfort feature to support the user’s feet when sitting on the seat. The foot rest will have switches developed into them to stop the lift needs to it hit anything on the staircase and will turn up out of the way when the lift is not in use.
Motor – The motor that drives a stair lift chair along the track is found in the base of the seat.
Transmission – Because the motor turns at too high a speed to safely propel the stair lift the track at kind of transmission is used to minimize the speed while increasing the power available.
Battery Charger – Battery powered stair lifts should have a battery charger of some sort to keep the battery charged. The chargers are generally found under the track or near one end of the track. The battery charger works instantly without any action needed by the user.
Battery – The batteries utilized in stair lifts are relatively expensive and found within the base of the seat near the motor. They will have to be changed at some time however their life expectancy is measured in years and thier replacement should not be a huge concern.
The Best Ways To Measure For Your Wheelchair Stair Lift Setup In Glens Falls
Measurement 1: Stand at the top of stairs and extend the measuring tape down to the landing, letting it rest on edge of each tread. The tape must not droop or flex along the way. Record the distance from the edge of the upper landing to where completion of the measuring tape rests on the landing at the bottom of the stairs.
Measurement 2: Measure from the edge of the upper landing (like Measurement 1) to the edge of the first stair’s tread at the bottom.
Measurement 3: Determine the width of your stair’s treads.
Measurement: Measure from the edge of the very first stair at the bottom to the wall (or door), if there is one.
Measurement 5 through 7 Measurements 5-7: These are the tread measurements.
Measurement 8: Measure from the top step to the nearest door, wall or other obstruction at the top of the stairs.
The Advantages of Stair Lifts for Senior Citizens In Glens Falls New York
Outdoor stair lift Limited mobility is a problem for many seniors and a concern for their families in Glens Falls. Elderly people who want to stay in their homes and stay independent can improve their movement and stay safe by installing a stair lift.
A stair lift can transport you or a loved one safely from one floor to another in the house. A stair lift can provide a safe ways of transportation so that you will no longer have to fret about the threats of falling on the stairs. It is a particularly excellent option for a senior citizen who lives alone.
3 Vital Uses for Heavy-Duty Stair Lifts In Glens Falls
Stair lifts been available in a variety of sizes and capacities. Compact models accommodate and provide mobility for narrow staircases, supporting as much as 350 pounds in the process, and at the other end, durable stair lifts provide a larger seat and can deal with a greater series of body types.
1. You Can Supply Access to Almost Everyone
Because of the larger, more powerful design, the stair lift provides ease of access and enhances movement for anybody who’s heavier than average. Nevertheless, the normal stair lift might be too narrow or too short for some, and as the sturdy design provides a bigger, higher seat, it further accommodates anybody who’s taller than average or has problem comfortably using a standard model.
2. Business Applications
While not needed to satisfy ADA standards, stair lifts supply an added convenience to those with mobility problems.
Within Glens Falls a home, a basic lift might accommodate two average-sized adults, but exactly what about when you have to handle the public? Your client base, clients, and patients most likely been available in a range of shapes and sizes, so the durable model basically fits everybody who would have to use the stairs.
Understand that, to set up a heavy-duty lift, any staircase needs to offer 36 inches of space.
3. For Several Household Members
Exactly what occurs, however, when several member of the family require ease of access? Whether you’re meeting a current requirement or expecting a future one, installing a bigger lift takes everyone’s physical needs into consideration. If your house’s equipped with enough area, take precautions by having a durable lift installed.
Call Us Now 844-561-5857 For A No Obligation Quote