Wheelchair Lift Gays Mills WI
How Stair Lifts Work
A stair lift is basically a chair that travels along and rail or track that is mounted to a staircase.
There is a motor within the base of the chair that is generally powered by a battery also within the base of the chair. The stair lift motor turns a gear that is meshed into a geared strip on the track or rail. When the gear turns the chair is moved along the geared strip. When the motor turns the gear the chair moves one direction, when the motor’s direction is reversed the chair moves the opposite way.
Call/Send switches are utilized to move the stair lift chair without anyone being on it. This is especially valuable if 2 individuals use the lift and the lift is at the opposite end of the track when a user wishes to use it. the user just calls the lift to come to them using a call/send switch. Another use of call/send switch is to send the lift away after usage. Some individuals do not like the look of the lift parked in the main living area of the home in Gays Mills and will send it to the opposite end when not in use. They merely call it back when needed.
Stair Lift Components
Although the design and style of stair lifts will vary between manufacturers they all have some basic components typical to them all:
Track or Rail – The stair lift track supports the chair, supplies a system (generally a geared strip) to move the chair and guides it up and down the stairway just as a train track guides a train.
Track Overruns – Some stair lifts offer the alternative of an overrun at either the top of the track, bottom of the track or both. The purpose of a stair lift track overrun is to move the user away from the stairs to safely access or dismount the stair lift in a place where, if they fall, they will not fall on the stairs.
Power supply – While most stair lifts are battery ran today all model will need a power supply to either charge the battery or power the unit directly in the case of non-battery powered units. Non-battery powered stair lifts draw a lot of power and normally need a devoted circuit.
Call/Send Controls – Call/Send controls are normally mounted on the wall near each end of the stair lift track to supply a method for a user to call the chair to them or send it away when not required. They can be either cordless or wired to the lift depending upon the model.
Seat – The stair lift seat is merely a seat for the user to sit on while utilizing the lift. Depending upon the model it might swivel at the top and/or bottom of the track and will normally fold out of the way when not in use.
Seat Belt – As in a car the stair lift safety belt is intended to hold the user safely seated on the seat while the lift is in use.
Foot Rest – The foot remainder of the stair lift is a safety function to prevent the the users feet from striking the steps while using the lift and a comfort feature to support the user’s feet when sitting on the seat. The foot rest will have switches developed into them to stop the lift must it hit anything on the stairway and will flip up out of the way when the lift is not in use.
Motor – The motor that drives a stair lift chair along the track is found in the base of the seat.
Transmission – Since the motor turns at too expensive a speed to securely move the stair lift the track at kind of transmission is employed to minimize the speed while increasing the power available.
Battery Charger – Battery powered stair lifts must have a battery charger of some sort to keep the battery charged. The battery chargers are generally found under the track or near one end of the track. The battery charger works automatically without any action needed by the user.
Battery – The batteries used in stair lifts are fairly expensive and found within the base of the seat near the motor. They will have to be changed at some time but their life span is determined in years and thier replacement need to not be a huge issue.
Ways To Measure For Your Wheelchair Stair Lift Setup In Gays Mills
Measurement 1: Stand at the top of stairs and extend the measuring tape down to the landing, letting it rest on edge of each tread. The tape should not droop or flex along the way. Record the distance from the edge of the upper landing to where the end of the tape measure rests on the landing at the bottom of the stairs.
Measurement 2: Measure from the edge of the upper landing (like Measurement 1) to the edge of the very first stair’s tread at the bottom.
Measurement 3: Measure the width of your stair’s treads.
Measurement: Measure from the edge of the first stair at the bottom to the wall (or door), if there is one.
Measurement 5 through 7 Measurements 5-7: These are the tread measurements.
Measurement 8: Measure from the top step to the nearest door, wall or other obstruction at the top of the stairs.
The Advantages of Stair Lifts for Seniors In Gays Mills Wisconsin
Outside stair lift Limited movement is a concern for numerous seniors and an issue for their families in Gays Mills. Senior citizens who want to stay in their homes and remain independent can improve their movement and stay safe by installing a stair lift.
A stair lift can transfer you or a loved one safely from one floor to another in the house. A stair lift can provide a safe ways of transport so that you will not have to stress over the dangers of falling on the stairs. It is a specifically excellent alternative for an elderly person who lives alone.
3 Important Utilizes for Heavy-Duty Stair Lifts In Gays Mills
Stair lifts can be found in a range of sizes and capacities. Compact models accommodate and supply movement for narrow staircases, supporting approximately 350 pounds at the same time, and at the other end, heavy-duty stair lifts offer a wider seat and can handle a higher variety of body types.
1. You Can Offer Access to Nearly Everybody
Because of the larger, more powerful design, the stair lift offers availability and enhances mobility for anybody who’s heavier than average. However, the normal stair lift might be too narrow or too short for some, and as the sturdy design offers a larger, greater seat, it even more accommodates anyone who’s taller than average or has difficulty comfortably utilizing a standard model.
2. Industrial Applications
While not had to satisfy ADA standards, stair lifts supply an added benefit to those with mobility problems.
Within Gays Mills a house, a standard lift might accommodate two average-sized adults, however what about when you have to deal with the public? Your customer base, customers, and patients likely been available in a series of sizes and shapes, so the durable model basically suits everyone who would have to use the stairs.
Know that, to install a heavy-duty lift, any staircase should provide 36 inches of space.
3. For Several Family Members
What occurs, though, when multiple member of the family require availability? Whether you’re fulfilling an existing need or expecting a future one, installing a bigger lift takes everyone’s physical requirements into consideration. If your home’s equipped with sufficient space, take safety measures by having a sturdy lift installed.
Call Us Now 844-561-5857 For A No Obligation Quote