Wheelchair Lift Cornell WI
How Stair Lifts Work
A stair lift is essentially a chair that travels along and rail or track that is installed to a staircase.
There is a motor within the base of the chair that is typically powered by a battery also within the base of the chair. The stair lift motor turns a gear that is meshed into a geared strip on the track or rail. When the gear turns the chair is moved along the geared strip. When the motor turns the gear the chair moves one direction, when the motor’s direction is reversed the chair moves the opposite way.
Call/Send switches are utilized to move the stair lift chair without anyone being on it. This is especially useful if two individuals use the lift and the lift is at the opposite end of the track when a user wants to utilize it. the user just calls the lift to come to them utilizing a call/send switch. Another use of call/send switch is to send out the lift away after usage. Some individuals don’t like the look of the lift parked in the main living area of the home in Cornell and will send it to the opposite end when not in use. They just call it back when required.
Stair Lift Parts
Although the design and style of stair lifts will vary between makers they all have some basic parts typical to them all:
Track or Rail – The stair lift track supports the chair, supplies a system (usually a geared strip) to propel the chair and guides it up and down the stairs just as a train track guides a train.
Track Overruns – Some stair lifts offer the choice of an overrun at either the top of the track, bottom of the track or both. The purpose of a stair lift track overrun is to move the user far from the stairway to safely access or dismount the stair lift in a place where, if they fall, they will not fall on the stairs.
Power supply – While a lot of stair lifts are battery ran today all model will need a power supply to either charge the battery or power the unit straight when it comes to non-battery powered units. Non-battery powered stair lifts draw a lot of power and normally need a dedicated circuit.
Call/Send Controls – Call/Send controls are generally installed on the wall near each end of the stair lift track to offer a way for a user to call the chair to them or send it away when not required. They can be either wireless or wired to the lift depending upon the design.
Seat – The stair lift seat is just a seat for the user to rest on while using the lift. Depending on the model it might swivel at the top and/or bottom of the track and will normally fold out of the way when not in use.
Seat Belt – As in a vehicle the stair lift safety belt is intended to hold the user safely seated on the seat while the lift remains in use.
Foot Rest – The foot remainder of the stair lift is a security feature to prevent the the users feet from hitting the steps while utilizing the lift and a comfort function to support the user’s feet when resting on the seat. The foot rest will have switches built into them to stop the lift ought to it strike anything on the stairs and will turn up out of the way when the lift is not in use.
Motor – The motor that drives a stair lift chair along the track is found in the base of the seat.
Transmission – Since the motor turns at too high a speed to securely propel the stair lift the track at type of transmission is utilized to reduce the speed while increasing the power readily available.
Battery Battery charger – Battery powered stair lifts must have a charger of some sort to keep the battery charged. The chargers are normally found under the track or near one end of the track. The battery charger works automatically with no action needed by the user.
Battery – The batteries utilized in stair lifts are fairly costly and found within the base of the seat near the motor. They will need to be changed at some time but their life span is determined in years and thier replacement must not be a huge concern.
The Best Ways To Measure For Your Wheelchair Stair Lift Setup In Cornell
Measurement 1: Stand at the top of stairs and extend the measuring tape down to the landing, letting it rest on edge of each tread. The tape must not sag or flex along the way. Record the distance from the edge of the upper landing to where the end of the measuring tape rests on the landing at the bottom of the stairs.
Measurement 2: Measure from the edge of the upper landing (like Measurement 1) to the edge of the first stair’s tread at the bottom.
Measurement 3: Determine the width of your stair’s treads.
Measurement: Measure from the edge of the first stair at the bottom to the wall (or door), if there is one.
Measurement 5 through 7 Measurements 5-7: These are the tread measurements.
Measurement 8: Measure from the top step to the closest door, wall or other obstruction at the top of the stairs.
The Advantages of Stair Lifts for Senior Citizens In Cornell Wisconsin
Outside stair lift Limited mobility is a concern for many senior citizens and an issue for their families in Cornell. Seniors who want to stay in their homes and stay independent can enhance their mobility and stay safe by installing a stair lift.
A stair lift can transport you or a loved one securely from one floor to another at home. A stair lift can provide a safe ways of transport so that you will not have to fret about the dangers of falling on the stairs. It is a specifically good choice for an elderly person who lives alone.
3 Necessary Utilizes for Heavy-Duty Stair Lifts In Cornell
Stair lifts come in a series of sizes and capacities. Compact models accommodate and offer mobility for narrow staircases, supporting up to 350 pounds in the process, and at the other end, sturdy stair lifts use a larger seat and can manage a greater variety of body types.
1. You Can Supply Access to Almost Everybody
Because of the larger, more powerful design, the stair lift supplies availability and improves movement for anyone who’s heavier than average. However, the common stair lift might be too narrow or too short for some, and as the durable design provides a bigger, greater seat, it further accommodates anyone who’s taller than average or has problem comfortably utilizing a standard design.
2. Commercial Applications
While not needed to meet ADA requirements, stair lifts provide an added benefit to those with mobility issues.
Within Cornell a home, a standard lift might accommodate 2 average-sized adults, but what about when you have to handle the public? Your client base, clients, and patients likely been available in a variety of shapes and sizes, so the sturdy model basically fits everyone who would need to utilize the stairs.
Know that, to install a heavy-duty lift, any staircase must provide 36 inches of space.
3. For Numerous Family Members
What happens, however, when several family members require accessibility? Whether you’re satisfying a present need or expecting a future one, setting up a bigger lift takes everyone’s physical requirements into consideration. If your home’s equipped with adequate area, take safety measures by having a sturdy lift installed.
Call Us Now 844-561-5857 For A No Obligation Quote