Wheelchair Lift Columbus WI

Wheelchair Lift Columbus

How Stair Lifts Work

A stair lift is generally a chair that travels along and rail or track that is mounted to a stairs.

There is a motor within the base of the chair that is usually powered by a battery also within the base of the chair. The stair lift motor turns a gear that is meshed into a geared strip on the track or rail. When the gear turns the chair is moved along the geared strip. When the motor turns the gear the chair moves one direction, when the motor’s direction is reversed the chair moves the opposite way.

Call/Send switches are used to move the stair lift chair without anybody being on it. This is especially handy if two people utilize the lift and the lift is at the opposite end of the track when a user wishes to utilize it. the user just calls the lift to come to them utilizing a call/send switch. Another use of call/send switch is to send the lift away after use. Some individuals do not like the appearance of the lift parked in the main living area of the home in Columbus and will send it to the opposite end when not in use. They just call it back when needed.

Stair Lift Components

Although the design and style of stair lifts will vary between producers they all have some fundamental parts typical to them all:

Track or Rail – The stair lift track supports the chair, offers a mechanism (normally a geared strip) to propel the chair and guides it up and down the staircase just as a train track guides a train.

Track Overruns – Some stair lifts use the alternative of an overrun at either the top of the track, bottom of the track or both. The function of a stair lift track overrun is to move the user far from the staircase to securely access or dismount the stair lift in an area where, if they fall, they will not fall on the stairs.

Power supply – While a lot of stair lifts are battery ran today all model will require a power supply to either charge the battery or power the system straight in the case of non-battery powered units. Non-battery powered stair lifts draw a great deal of power and normally require a devoted circuit.

Call/Send Controls – Call/Send controls are normally mounted on the wall near each end of the stair lift track to provide a method for a user to call the chair to them or send it away when not needed. They can be either cordless or wired to the lift depending upon the model.

Seat – The stair lift seat is just a seat for the user to sit on while using the lift. Depending on the model it might rotate at the top and/or bottom of the track and will typically fold out of the way when not in use.

Seat Belt – As in a car the stair lift safety belt is intended to hold the user securely seated on the seat while the lift remains in usage.

Foot Rest – The foot remainder of the stair lift is a safety function to prevent the the users feet from hitting the steps while using the lift and a comfort function to support the user’s feet when resting on the seat. The foot rest will have switches constructed into them to stop the lift needs to it hit anything on the stairway and will turn up out of the way when the lift is not in use.

Motor – The motor that drives a stair lift chair along the track is found in the base of the seat.

Transmission – Since the motor turns at expensive a speed to securely propel the stair lift the track at kind of transmission is utilized to decrease the speed while increasing the power readily available.

Battery Battery charger – Battery powered stair lifts should have a charger of some sort to keep the battery charged. The battery chargers are typically found under the track or near one end of the track. The charger works instantly without any action required by the user.

Battery – The batteries used in stair lifts are relatively costly and found within the base of the seat near the motor. They will have to be changed at some time however their life expectancy is determined in years and thier replacement should not be a big issue.

Ways To Measure For Your Wheelchair Stair Lift Setup In Columbus

Measurement 1: Stand at the top of stairs and extend the tape measure down to the landing, letting it rest on edge of each tread. The tape must not sag or bend along the way. Record the distance from the edge of the upper landing to where the end of the tape measure rests on the landing at the bottom of the stairs.

Measurement 2: Measure from the edge of the upper landing (like Measurement 1) to the edge of the very first stair’s tread at the bottom.

Measurement 3: Determine the width of your stair’s treads.

Measurement: Measure from the edge of the first stair at the bottom to the wall (or door), if there is one.

Measurement 5 through 7 Measurements 5-7: These are the tread measurements.

Measurement 8: Measure from the top step to the nearest door, wall or other obstruction at the top of the stairs.

chair lift Columbus

The Advantages of Stair Lifts for Seniors In Columbus Wisconsin

Outdoor stair lift Limited movement is a problem for numerous seniors and an issue for their families in Columbus. Seniors who want to stay in their homes and stay independent can improve their mobility and remain safe by setting up a stair lift.

A stair lift can transport you or a loved one safely from one floor to another in the house. A stair lift can supply a safe ways of transport so that you will no longer have to worry about the risks of falling on the stairs. It is a specifically excellent alternative for a senior citizen who lives alone.

3 Essential Utilizes for Heavy-Duty Stair Lifts In Columbus

Stair lifts come in a series of sizes and capacities. Compact models accommodate and offer movement for narrow staircases, supporting approximately 350 pounds while doing so, and at the other end, heavy-duty stair lifts use a larger seat and can deal with a greater variety of body types.

1. You Can Supply Access to Nearly Everyone

Because of the larger, stronger design, the stair lift provides accessibility and improves movement for anyone who’s heavier than average. However, the common stair lift might be too narrow or too short for some, and as the heavy-duty design uses a larger, higher seat, it further accommodates anybody who’s taller than average or has problem comfortably utilizing a basic model.

2. Industrial Applications

While not had to meet ADA requirements, stair lifts supply an added convenience to those with movement issues.

Within Columbus a home, a basic lift might accommodate two average-sized adults, but what about when you have to deal with the public? Your customer base, clients, and patients likely can be found in a range of shapes and sizes, so the heavy-duty model basically matches everyone who would need to use the stairs.

Be aware that, to install a durable lift, any staircase must supply 36 inches of space.

3. For Several Household Members

What takes place, however, when numerous family members require availability? Whether you’re satisfying an existing requirement or expecting a future one, setting up a larger lift takes everyone’s physical needs into consideration. If your home’s equipped with enough area, take safety measures by having a sturdy lift set up.

Call Us Now 844-561-5857 For A No Obligation Quote