Wheelchair Lift Canton NY

Wheelchair Lift Canton

How Stair Lifts Work

A stair lift is basically a chair that travels along and rail or track that is mounted to a stairway.

There is a motor within the base of the chair that is normally powered by a battery also within the base of the chair. The stair lift motor turns a gear that is meshed into a geared strip on the track or rail. When the gear turns the chair is moved along the geared strip. When the motor turns the gear the chair moves one direction, when the motor’s direction is reversed the chair moves the opposite way.

Call/Send switches are utilized to move the stair lift chair without anyone being on it. This is particularly helpful if 2 people use the lift and the lift is at the opposite end of the track when a user wants to utilize it. the user simply calls the lift to come to them utilizing a call/send switch. Another use of call/send switch is to send the lift away after usage. Some people don’t like the appearance of the lift parked in the main living area of the home in Canton and will send it to the opposite end when not in use. They just call it back when needed.

Stair Lift Components

Although the design and style of stair lifts will vary between manufacturers they all have some fundamental components common to them all:

Track or Rail – The stair lift track supports the chair, supplies a system (typically a geared strip) to move the chair and guides it up and down the staircase just as a train track guides a train.

Track Overruns – Some stair lifts offer the alternative of an overrun at either the top of the track, bottom of the track or both. The purpose of a stair lift track overrun is to move the user far from the staircase to safely access or dismount the stair lift in a place where, if they fall, they won’t fall on the stairs.

Power supply – While most stair lifts are battery ran today all model will need a power supply to either charge the battery or power the system directly in the case of non-battery powered systems. Non-battery powered stair lifts draw a great deal of power and normally need a devoted circuit.

Call/Send Controls – Call/Send controls are usually installed on the wall near each end of the stair lift track to supply a way for a user to call the chair to them or send it away when not needed. They can be either cordless or wired to the lift depending upon the design.

Seat – The stair lift seat is merely a seat for the user to sit on while using the lift. Depending on the model it may swivel at the top and/or bottom of the track and will normally fold out of the way when not in use.

Seat Belt – As in an automobile the stair lift seat belt is intended to hold the user safely seated on the seat while the lift is in usage.

Foot Rest – The foot rest of the stair lift is a security function to prevent the the users feet from striking the steps while using the lift and a comfort function to support the user’s feet when resting on the seat. The foot rest will have switches developed into them to stop the lift needs to it strike anything on the stairs and will flip up out of the way when the lift is not in use.

Motor – The motor that drives a stair lift chair along the track is found in the base of the seat.

Transmission – Since the motor rotates at too expensive a speed to safely move the stair lift the track at kind of transmission is employed to minimize the speed while increasing the power available.

Battery Charger – Battery powered stair lifts must have a battery charger of some sort to keep the battery charged. The battery chargers are normally found under the track or near one end of the track. The battery charger works immediately without any action needed by the user.

Battery – The batteries used in stair lifts are relatively expensive and found within the base of the seat near the motor. They will need to be changed at some time but their life span is determined in years and thier replacement must not be a huge issue.

How To Measure For Your Wheelchair Stair Lift Installation In Canton

Measurement 1: Stand at the top of stairs and extend the tape measure down to the landing, letting it rest on edge of each tread. The tape should not droop or flex along the way. Record the distance from the edge of the upper landing to where the end of the tape measure rests on the landing at the bottom of the stairs.

Measurement 2: Measure from the edge of the upper landing (like Measurement 1) to the edge of the very first stair’s tread at the bottom.

Measurement 3: Measure the width of your stair’s treads.

Measurement: Measure from the edge of the first stair at the bottom to the wall (or door), if there is one.

Measurement 5 through 7 Measurements 5-7: These are the tread measurements.

Measurement 8: Measure from the top step to the closest door, wall or other obstruction at the top of the stairs.

chair lift Canton

The Advantages of Stair Lifts for Senior Citizens In Canton New York

Outdoor stair lift Limited mobility is an issue for numerous seniors and an issue for their families in Canton. Elderly people who want to remain in their houses and remain independent can enhance their mobility and stay safe by setting up a stair lift.

A stair lift can transfer you or a loved one safely from one floor to another in your home. A stair lift can offer a safe means of transportation so that you will no longer have to fret about the threats of falling on the stairs. It is a specifically good alternative for an elderly person who lives alone.

3 Necessary Utilizes for Heavy-Duty Stair Lifts In Canton

Stair lifts been available in a range of sizes and capacities. Compact models accommodate and provide mobility for narrow staircases, supporting up to 350 pounds while doing so, and at the other end, sturdy stair lifts offer a larger seat and can deal with a greater series of body types.

1. You Can Offer Access to Almost Everybody

Because of the bigger, more powerful design, the stair lift provides accessibility and improves mobility for anybody who’s much heavier than average. Nevertheless, the typical stair lift might be too narrow or too short for some, and as the heavy-duty design uses a bigger, greater seat, it even more accommodates anyone who’s taller than average or has difficulty comfortably using a basic model.

2. Industrial Applications

While not needed to satisfy ADA requirements, stair lifts supply an added convenience to those with mobility concerns.

Within Canton a home, a standard lift might accommodate two average-sized adults, but exactly what about when you need to handle the general public? Your client base, customers, and patients most likely been available in a range of sizes and shapes, so the heavy-duty model basically fits everyone who would need to utilize the stairs.

Know that, to set up a sturdy lift, any staircase should supply 36 inches of room.

3. For Numerous Family Members

What happens, however, when multiple family members need ease of access? Whether you’re satisfying a present need or preparing for a future one, installing a larger lift takes everybody’s physical requirements into consideration. If your home’s equipped with sufficient space, take safety measures by having a sturdy lift set up.

Call Us Now 844-561-5857 For A No Obligation Quote