Wheelchair Lift Brenton WV
How Stair Lifts Work
A stair lift is essentially a chair that travels along and rail or track that is installed to a staircase.
There is a motor within the base of the chair that is typically powered by a battery also within the base of the chair. The stair lift motor turns a gear that is meshed into a geared strip on the track or rail. When the gear turns the chair is moved along the geared strip. When the motor turns the gear the chair moves one direction, when the motor’s direction is reversed the chair moves the opposite way.
Call/Send switches are used to move the stair lift chair without anyone being on it. This is especially practical if 2 people use the lift and the lift is at the opposite end of the track when a user wants to utilize it. the user simply calls the lift to come to them using a call/send switch. Another use of call/send switch is to send the lift away after use. Some individuals don’t like the appearance of the lift parked in the main living area of the house in Brenton and will send it to the opposite end when not in use. They simply call it back when needed.
Stair Lift Parts
Although the design and style of stair lifts will vary between producers they all have some fundamental elements typical to them all:
Track or Rail – The stair lift track supports the chair, supplies a system (generally a geared strip) to move the chair and guides it up and down the staircase just as a train track guides a train.
Track Overruns – Some stair lifts use the choice of an overrun at either the top of the track, bottom of the track or both. The purpose of a stair lift track overrun is to move the user away from the stairs to safely access or dismount the stair lift in an area where, if they fall, they won’t fall on the stairs.
Power supply – While many stair lifts are battery ran today all model will need a power supply to either charge the battery or power the unit directly when it comes to non-battery powered units. Non-battery powered stair lifts draw a great deal of power and typically need a devoted circuit.
Call/Send Controls – Call/Send controls are normally installed on the wall near each end of the stair lift track to provide a way for a user to call the chair to them or send it away when not required. They can be either cordless or wired to the lift depending on the design.
Seat – The stair lift seat is simply a seat for the user to rest on while utilizing the lift. Depending upon the model it may swivel at the top and/or bottom of the track and will normally fold up out of the way when not in use.
Seat Belt – As in an automobile the stair lift safety belt is intended to hold the user safely seated on the seat while the lift remains in use.
Foot Rest – The foot remainder of the stair lift is a security function to prevent the the users feet from striking the steps while using the lift and a comfort feature to support the user’s feet when resting on the seat. The foot rest will have switches built into them to stop the lift should it strike anything on the stairs and will flip up out of the way when the lift is not in use.
Motor – The motor that drives a stair lift chair along the track is found in the base of the seat.
Transmission – Since the motor turns at too expensive a speed to safely propel the stair lift the track at kind of transmission is used to reduce the speed while increasing the power offered.
Battery Charger – Battery powered stair lifts must have a battery charger of some sort to keep the battery charged. The chargers are normally found under the track or near one end of the track. The charger works immediately without any action needed by the user.
Battery – The batteries used in stair lifts are relatively expensive and found within the base of the seat near the motor. They will have to be replaced at some time but their life span is determined in years and thier replacement ought to not be a huge issue.
Ways To Measure For Your Wheelchair Stair Lift Installation In Brenton
Measurement 1: Stand at the top of stairs and extend the tape measure down to the landing, letting it rest on edge of each tread. The tape must not droop or flex along the way. Record the distance from the edge of the upper landing to where completion of the measuring tape rests on the landing at the bottom of the stairs.
Measurement 2: Measure from the edge of the upper landing (like Measurement 1) to the edge of the first stair’s tread at the bottom.
Measurement 3: Measure the width of your stair’s treads.
Measurement: Measure from the edge of the first stair at the bottom to the wall (or door), if there is one.
Measurement 5 through 7 Measurements 5-7: These are the tread measurements.
Measurement 8: Measure from the top step to the closest door, wall or other obstruction at the top of the stairs.
The Benefits of Stair Lifts for Seniors In Brenton West Virginia
Outdoor stair lift Limited mobility is a concern for numerous senior citizens and a concern for their families in Brenton. Elderly people who want to stay in their homes and stay independent can enhance their movement and stay safe by setting up a stair lift.
A stair lift can carry you or a loved one safely from one floor to another in your home. A stair lift can supply a safe ways of transport so that you will no longer have to fret about the threats of falling on the stairs. It is a specifically good option for a senior who lives alone.
3 Important Utilizes for Heavy-Duty Stair Lifts In Brenton
Stair lifts come in a series of sizes and capacities. Compact models accommodate and provide movement for narrow staircases, supporting approximately 350 pounds in the process, and at the other end, heavy-duty stair lifts use a broader seat and can deal with a higher series of body types.
1. You Can Provide Access to Nearly Everyone
Because of the larger, stronger design, the stair lift offers accessibility and improves mobility for anyone who’s heavier than average. Nevertheless, the typical stair lift might be too narrow or too short for some, and as the sturdy design provides a bigger, higher seat, it even more accommodates anybody who’s taller than average or has difficulty conveniently using a standard design.
2. Industrial Applications
While not needed to fulfill ADA standards, stair lifts offer an added convenience to those with mobility problems.
Within Brenton a home, a standard lift might accommodate 2 average-sized adults, but exactly what about when you need to handle the general public? Your customer base, clients, and patients most likely can be found in a range of sizes and shapes, so the sturdy model basically suits everybody who would need to use the stairs.
Be aware that, to set up a sturdy lift, any staircase must provide 36 inches of room.
3. For Numerous Household Members
What takes place, though, when multiple member of the family need ease of access? Whether you’re fulfilling an existing need or anticipating a future one, setting up a larger lift takes everybody’s physical needs into consideration. If your home’s equipped with sufficient area, take precautions by having a durable lift installed.
Call Us Now 844-561-5857 For A No Obligation Quote