Wheelchair Lift Blenker WI

Wheelchair Lift Blenker

How Stair Lifts Work

A stair lift is generally a chair that travels along and rail or track that is installed to a stairway.

There is a motor within the base of the chair that is generally powered by a battery also within the base of the chair. The stair lift motor turns a gear that is meshed into a geared strip on the track or rail. When the gear turns the chair is moved along the geared strip. When the motor turns the gear the chair moves one direction, when the motor’s direction is reversed the chair moves the opposite way.

Call/Send switches are utilized to move the stair lift chair without anybody being on it. This is particularly valuable if 2 individuals use the lift and the lift is at the opposite end of the track when a user wants to use it. the user simply calls the lift to come to them using a call/send switch. Another use of call/send switch is to send out the lift away after use. Some individuals don’t like the appearance of the lift parked in the main living area of the house in Blenker and will send it to the opposite end when not in use. They simply call it back when required.

Stair Lift Components

Although the design and style of stair lifts will vary between manufacturers they all have some standard parts typical to them all:

Track or Rail – The stair lift track supports the chair, supplies a mechanism (typically a geared strip) to move the chair and guides it up and down the stairs just as a train track guides a train.

Track Overruns – Some stair lifts use the choice of an overrun at either the top of the track, bottom of the track or both. The purpose of a stair lift track overrun is to move the user far from the stairway to safely access or dismount the stair lift in a place where, if they fall, they won’t fall on the stairs.

Power supply – While most stair lifts are battery operated today all model will need a power supply to either charge the battery or power the system directly when it comes to non-battery powered units. Non-battery powered stair lifts draw a lot of power and normally require a devoted circuit.

Call/Send Controls – Call/Send controls are normally mounted on the wall near each end of the stair lift track to provide a method for a user to call the chair to them or send it away when not required. They can be either wireless or wired to the lift depending on the model.

Seat – The stair lift seat is merely a seat for the user to rest on while utilizing the lift. Depending upon the model it might swivel at the top and/or bottom of the track and will typically fold up out of the way when not in use.

Seat Belt – As in a car the stair lift seat belt is planned to hold the user securely seated on the seat while the lift remains in usage.

Foot Rest – The foot rest of the stair lift is a safety function to prevent the the users feet from hitting the steps while using the lift and a comfort feature to support the user’s feet when sitting on the seat. The foot rest will have switches built into them to stop the lift must it strike anything on the stairs and will turn up out of the way when the lift is not in use.

Motor – The motor that drives a stair lift chair along the track is found in the base of the seat.

Transmission – Due to the fact that the motor rotates at too high a speed to securely move the stair lift the track at type of transmission is used to minimize the speed while increasing the power readily available.

Battery Charger – Battery powered stair lifts need to have a battery charger of some sort to keep the battery charged. The battery chargers are typically found under the track or near one end of the track. The charger works immediately without any action required by the user.

Battery – The batteries utilized in stair lifts are fairly expensive and found within the base of the seat near the motor. They will have to be changed at some time but their life span is measured in years and thier replacement must not be a huge concern.

Ways To Measure For Your Wheelchair Stair Lift Setup In Blenker

Measurement 1: Stand at the top of stairs and extend the measuring tape down to the landing, letting it rest on edge of each tread. The tape ought to not droop or bend along the way. Record the distance from the edge of the upper landing to where completion of the tape measure rests on the landing at the bottom of the stairs.

Measurement 2: Measure from the edge of the upper landing (like Measurement 1) to the edge of the very first stair’s tread at the bottom.

Measurement 3: Determine the width of your stair’s treads.

Measurement: Measure from the edge of the first stair at the bottom to the wall (or door), if there is one.

Measurement 5 through 7 Measurements 5-7: These are the tread measurements.

Measurement 8: Measure from the top step to the nearby door, wall or other obstruction at the top of the stairs.

chair lift Blenker

The Benefits of Stair Lifts for Seniors In Blenker Wisconsin

Outdoor stair lift Limited movement is a problem for lots of seniors and a concern for their families in Blenker. Seniors who want to remain in their homes and stay independent can improve their mobility and stay safe by setting up a stair lift.

A stair lift can transfer you or a loved one safely from one floor to another in your home. A stair lift can provide a safe means of transport so that you will no longer have to stress over the risks of falling on the stairs. It is an especially good alternative for an elderly person who lives alone.

3 Necessary Utilizes for Heavy-Duty Stair Lifts In Blenker

Stair lifts come in a variety of sizes and capacities. Compact models accommodate and supply movement for narrow staircases, supporting approximately 350 pounds while doing so, and at the other end, heavy-duty stair lifts provide a larger seat and can deal with a greater series of body types.

1. You Can Offer Access to Nearly Everyone

Because of the bigger, stronger design, the stair lift supplies ease of access and enhances mobility for anyone who’s much heavier than average. Nevertheless, the normal stair lift might be too narrow or too short for some, and as the heavy-duty design provides a larger, higher seat, it even more accommodates anybody who’s taller than average or has problem conveniently utilizing a standard model.

2. Commercial Applications

While not had to fulfill ADA standards, stair lifts provide an added benefit to those with movement concerns.

Within Blenker a home, a basic lift might accommodate 2 average-sized adults, however what about when you need to handle the general public? Your customer base, clients, and patients most likely come in a series of shapes and sizes, so the sturdy model basically fits everybody who would need to use the stairs.

Understand that, to install a heavy-duty lift, any staircase should supply 36 inches of room.

3. For Multiple Family Members

What takes place, however, when multiple family members require accessibility? Whether you’re satisfying an existing need or anticipating a future one, setting up a larger lift takes everyone’s physical requirements into consideration. If your home’s equipped with sufficient area, take precautions by having a heavy-duty lift installed.

Call Us Now 844-561-5857 For A No Obligation Quote