Wheelchair Lift Birchwood WI
How Stair Lifts Work
A stair lift is essentially a chair that travels along and rail or track that is installed to a stairs.
There is a motor within the base of the chair that is normally powered by a battery also within the base of the chair. The stair lift motor turns a gear that is meshed into a geared strip on the track or rail. When the gear turns the chair is moved along the geared strip. When the motor turns the gear the chair moves one direction, when the motor’s direction is reversed the chair moves the opposite way.
Call/Send switches are used to move the stair lift chair without anyone being on it. This is particularly valuable if two people utilize the lift and the lift is at the opposite end of the track when a user wishes to utilize it. the user simply calls the lift to come to them using a call/send switch. Another use of call/send switch is to send the lift away after use. Some individuals do not like the appearance of the lift parked in the main living area of the home in Birchwood and will send it to the opposite end when not in use. They merely call it back when needed.
Stair Lift Parts
Although the design and style of stair lifts will vary between makers they all have some fundamental components typical to them all:
Track or Rail – The stair lift track supports the chair, supplies a system (usually a geared strip) to propel the chair and guides it up and down the staircase just as a train track guides a train.
Track Overruns – Some stair lifts use the option of an overrun at either the top of the track, bottom of the track or both. The function of a stair lift track overrun is to move the user away from the stairway to safely access or dismount the stair lift in a location where, if they fall, they will not fall on the stairs.
Power supply – While a lot of stair lifts are battery ran today all model will need a power supply to either charge the battery or power the system directly when it comes to non-battery powered systems. Non-battery powered stair lifts draw a great deal of power and usually require a dedicated circuit.
Call/Send Controls – Call/Send controls are usually installed on the wall near each end of the stair lift track to offer a way for a user to call the chair to them or send it away when not needed. They can be either cordless or wired to the lift depending upon the design.
Seat – The stair lift seat is just a seat for the user to rest on while utilizing the lift. Depending upon the model it may rotate at the top and/or bottom of the track and will normally fold up out of the way when not in use.
Seat Belt – As in a vehicle the stair lift safety belt is planned to hold the user securely seated on the seat while the lift is in usage.
Foot Rest – The foot remainder of the stair lift is a safety function to prevent the the users feet from striking the steps while utilizing the lift and a comfort feature to support the user’s feet when sitting on the seat. The foot rest will have switches constructed into them to stop the lift should it strike anything on the stairway and will turn up out of the way when the lift is not in use.
Motor – The motor that drives a stair lift chair along the track is found in the base of the seat.
Transmission – Due to the fact that the motor rotates at too high a speed to securely propel the stair lift the track at kind of transmission is used to lower the speed while increasing the power offered.
Battery Charger – Battery powered stair lifts need to have a battery charger of some sort to keep the battery charged. The chargers are usually found under the track or near one end of the track. The charger works instantly without any action needed by the user.
Battery – The batteries utilized in stair lifts are relatively costly and found within the base of the seat near the motor. They will need to be replaced at some time but their life span is measured in years and thier replacement should not be a huge concern.
Ways To Measure For Your Wheelchair Stair Lift Setup In Birchwood
Measurement 1: Stand at the top of stairs and extend the tape measure down to the landing, letting it rest on edge of each tread. The tape ought to not droop or bend along the way. Record the distance from the edge of the upper landing to where the end of the tape measure rests on the landing at the bottom of the stairs.
Measurement 2: Measure from the edge of the upper landing (like Measurement 1) to the edge of the first stair’s tread at the bottom.
Measurement 3: Measure the width of your stair’s treads.
Measurement: Measure from the edge of the very first stair at the bottom to the wall (or door), if there is one.
Measurement 5 through 7 Measurements 5-7: These are the tread measurements.
Measurement 8: Measure from the top step to the closest door, wall or other obstruction at the top of the stairs.
The Advantages of Stair Lifts for Seniors In Birchwood Wisconsin
Outside stair lift Limited movement is a concern for many senior citizens and an issue for their families in Birchwood. Seniors who want to stay in their houses and remain independent can enhance their movement and stay safe by setting up a stair lift.
A stair lift can carry you or a loved one safely from one floor to another in the house. A stair lift can offer a safe ways of transportation so that you will not have to worry about the threats of falling on the stairs. It is a particularly good choice for a senior citizen who lives alone.
3 Vital Utilizes for Heavy-Duty Stair Lifts In Birchwood
Stair lifts come in a variety of sizes and capacities. Compact models accommodate and supply mobility for narrow staircases, supporting as much as 350 pounds at the same time, and at the other end, sturdy stair lifts provide a larger seat and can deal with a greater range of body types.
1. You Can Supply Access to Almost Everyone
Because of the bigger, stronger design, the stair lift provides ease of access and enhances movement for anyone who’s much heavier than average. However, the normal stair lift might be too narrow or too short for some, and as the heavy-duty design offers a bigger, higher seat, it further accommodates anyone who’s taller than average or has trouble comfortably utilizing a basic model.
2. Business Applications
While not needed to fulfill ADA requirements, stair lifts provide an added benefit to those with mobility concerns.
Within Birchwood a house, a standard lift might accommodate 2 average-sized adults, however what about when you need to handle the public? Your client base, customers, and patients likely come in a variety of sizes and shapes, so the heavy-duty model basically matches everybody who would have to utilize the stairs.
Know that, to set up a sturdy lift, any staircase needs to supply 36 inches of room.
3. For Numerous Household Members
Exactly what occurs, however, when several family members require accessibility? Whether you’re satisfying an existing need or expecting a future one, setting up a larger lift takes everybody’s physical needs into consideration. If your house’s geared up with sufficient area, take precautions by having a heavy-duty lift installed.
Call Us Now 844-561-5857 For A No Obligation Quote