Wheelchair Lift Altamont NY
How Stair Lifts Work
A stair lift is basically a chair that travels along and rail or track that is installed to a staircase.
There is a motor within the base of the chair that is normally powered by a battery also within the base of the chair. The stair lift motor turns a gear that is meshed into a geared strip on the track or rail. When the gear turns the chair is moved along the geared strip. When the motor turns the gear the chair moves one direction, when the motor’s direction is reversed the chair moves the opposite way.
Call/Send switches are used to move the stair lift chair without anyone being on it. This is especially helpful if 2 individuals utilize the lift and the lift is at the opposite end of the track when a user wants to use it. the user simply calls the lift to come to them using a call/send switch. Another use of call/send switch is to send the lift away after use. Some individuals don’t like the appearance of the lift parked in the main living area of the house in Altamont and will send it to the opposite end when not in use. They simply call it back when required.
Stair Lift Components
Although the design and style of stair lifts will vary between manufacturers they all have some fundamental parts typical to them all:
Track or Rail – The stair lift track supports the chair, offers a system (typically a geared strip) to move the chair and guides it up and down the staircase just as a train track guides a train.
Track Overruns – Some stair lifts use the choice of an overrun at either the top of the track, bottom of the track or both. The function of a stair lift track overrun is to move the user away from the staircase to securely access or dismount the stair lift in a place where, if they fall, they will not fall on the stairs.
Power supply – While many stair lifts are battery ran today all model will require a power supply to either charge the battery or power the unit straight when it comes to non-battery powered units. Non-battery powered stair lifts draw a great deal of power and usually need a devoted circuit.
Call/Send Controls – Call/Send controls are normally mounted on the wall near each end of the stair lift track to supply a way for a user to call the chair to them or send it away when not needed. They can be either cordless or wired to the lift depending upon the design.
Seat – The stair lift seat is just a seat for the user to sit on while using the lift. Depending upon the model it might swivel at the top and/or bottom of the track and will typically fold up out of the way when not in use.
Seat Belt – As in a car the stair lift seat belt is planned to hold the user securely seated on the seat while the lift is in use.
Foot Rest – The foot remainder of the stair lift is a security feature to prevent the the users feet from hitting the steps while using the lift and a comfort feature to support the user’s feet when resting on the seat. The foot rest will have switches developed into them to stop the lift must it hit anything on the staircase and will turn up out of the way when the lift is not in use.
Motor – The motor that drives a stair lift chair along the track is found in the base of the seat.
Transmission – Due to the fact that the motor turns at too high a speed to safely propel the stair lift the track at type of transmission is employed to lower the speed while increasing the power offered.
Battery Charger – Battery powered stair lifts must have a charger of some sort to keep the battery charged. The chargers are typically found under the track or near one end of the track. The charger works instantly with no action required by the user.
Battery – The batteries utilized in stair lifts are relatively expensive and found within the base of the seat near the motor. They will need to be changed at some time but their life span is measured in years and thier replacement must not be a big issue.
Ways To Measure For Your Wheelchair Stair Lift Installation In Altamont
Measurement 1: Stand at the top of stairs and extend the tape measure down to the landing, letting it rest on edge of each tread. The tape should not sag or bend along the way. Record the distance from the edge of the upper landing to where completion of the tape measure rests on the landing at the bottom of the stairs.
Measurement 2: Measure from the edge of the upper landing (like Measurement 1) to the edge of the very first stair’s tread at the bottom.
Measurement 3: Determine the width of your stair’s treads.
Measurement: Measure from the edge of the first stair at the bottom to the wall (or door), if there is one.
Measurement 5 through 7 Measurements 5-7: These are the tread measurements.
Measurement 8: Measure from the top step to the closest door, wall or other obstruction at the top of the stairs.
The Benefits of Stair Lifts for Senior Citizens In Altamont New York
Outside stair lift Limited movement is a concern for many seniors and a concern for their families in Altamont. Elderly people who wish to remain in their homes and stay independent can improve their movement and stay safe by installing a stair lift.
A stair lift can carry you or a loved one securely from one floor to another in the house. A stair lift can offer a safe means of transportation so that you will not need to stress over the risks of falling on the stairs. It is an especially good choice for an elderly person who lives alone.
3 Important Utilizes for Heavy-Duty Stair Lifts In Altamont
Stair lifts come in a range of sizes and capacities. Compact models accommodate and provide movement for narrow staircases, supporting as much as 350 pounds at the same time, and at the other end, heavy-duty stair lifts offer a larger seat and can deal with a greater range of body types.
1. You Can Supply Access to Almost Everybody
Because of the larger, more powerful design, the stair lift provides accessibility and improves mobility for anyone who’s much heavier than average. Nevertheless, the typical stair lift might be too narrow or too short for some, and as the heavy-duty design offers a bigger, higher seat, it further accommodates anyone who’s taller than average or has problem comfortably using a basic design.
2. Business Applications
While not needed to meet ADA standards, stair lifts provide an added convenience to those with movement issues.
Within Altamont a house, a standard lift might accommodate two average-sized adults, but what about when you need to deal with the general public? Your customer base, customers, and patients likely been available in a variety of shapes and sizes, so the durable model essentially suits everyone who would have to utilize the stairs.
Know that, to set up a sturdy lift, any staircase must provide 36 inches of space.
3. For Several Household Members
What takes place, however, when multiple family members require accessibility? Whether you’re satisfying a present need or anticipating a future one, installing a bigger lift takes everyone’s physical needs into consideration. If your house’s geared up with enough area, take preventative measures by having a sturdy lift installed.
Call Us Now 844-561-5857 For A No Obligation Quote