Stair Lift Tolleson AZ

stair lift Tolleson

How Stair Lifts Work

A stair lift is basically a chair that travels along and rail or track that is mounted to a stairway.

There is a motor within the base of the chair that is typically powered by a battery also within the base of the chair. The stair lift motor turns a gear that is meshed into a geared strip on the track or rail. When the gear turns the chair is moved along the geared strip. When the motor turns the gear the chair moves one direction, when the motor’s direction is reversed the chair moves the opposite way.

Call/Send switches are utilized to move the stair lift chair without anybody being on it. This is especially practical if 2 individuals use the lift and the lift is at the opposite end of the track when a user wants to utilize it. the user merely calls the lift to come to them using a call/send switch. Another use of call/send switch is to send the lift away after use. Some people don’t like the appearance of the lift parked in the main living area of the house in Tolleson and will send it to the opposite end when not in use. They just call it back when needed.

Stair Lift Parts

Although the design and style of stair lifts will vary between producers they all have some basic parts common to them all:

Track or Rail – The stair lift track supports the chair, provides a system (typically a geared strip) to move the chair and guides it up and down the stairs just as a train track guides a train.

Track Overruns – Some stair lifts offer the alternative of an overrun at either the top of the track, bottom of the track or both. The purpose of a stair lift track overrun is to move the user away from the stairs to securely access or dismount the stair lift in a place where, if they fall, they won’t fall on the stairs.

Power supply – While a lot of stair lifts are battery ran today all model will require a power supply to either charge the battery or power the unit straight in the case of non-battery powered units. Non-battery powered stair lifts draw a lot of power and normally require a dedicated circuit.

Call/Send Controls – Call/Send controls are usually installed on the wall near each end of the stair lift track to offer a way for a user to call the chair to them or send it away when not required. They can be either cordless or wired to the lift depending on the design.

Seat – The stair lift seat is simply a seat for the user to sit on while utilizing the lift. Depending on the model it may swivel at the top and/or bottom of the track and will normally fold out of the way when not in use.

Seat Belt – As in an automobile the stair lift safety belt is intended to hold the user securely seated on the seat while the lift is in usage.

Foot Rest – The foot rest of the stair lift is a security function to prevent the the users feet from striking the steps while utilizing the lift and a comfort feature to support the user’s feet when sitting on the seat. The foot rest will have switches developed into them to stop the lift must it strike anything on the stairs and will flip up out of the way when the lift is not in use.

Motor – The motor that drives a stair lift chair along the track is found in the base of the seat.

Transmission – Due to the fact that the motor rotates at too expensive a speed to securely move the stair lift the track at kind of transmission is utilized to minimize the speed while increasing the power available.

Battery Battery charger – Battery powered stair lifts need to have a battery charger of some sort to keep the battery charged. The battery chargers are generally found under the track or near one end of the track. The battery charger works immediately without any action needed by the user.

Battery – The batteries utilized in stair lifts are relatively expensive and found within the base of the seat near the motor. They will have to be changed at some time but their life expectancy is determined in years and thier replacement need to not be a huge concern.

Ways To Measure For Your Stair Lift Setup In Tolleson

Measurement 1: Stand at the top of stairs and extend the measuring tape down to the landing, letting it rest on edge of each tread. The tape needs to not sag or flex along the way. Record the distance from the edge of the upper landing to where completion of the tape measure rests on the landing at the bottom of the stairs.

Measurement 2: Measure from the edge of the upper landing (like Measurement 1) to the edge of the very first stair’s tread at the bottom.

Measurement 3: Measure the width of your stair’s treads.

Measurement: Measure from the edge of the first stair at the bottom to the wall (or door), if there is one.

Measurement 5 through 7 Measurements 5-7: These are the tread measurements.

Measurement 8: Measure from the top step to the nearest door, wall or other obstruction at the top of the stairs.

chair lift Tolleson

The Advantages of Stair Lifts for Seniors In Tolleson Arizona

Outside stair lift Limited movement is a problem for lots of seniors and an issue for their families in Tolleson. Seniors who wish to remain in their houses and stay independent can improve their movement and remain safe by setting up a stair lift.

A stair lift can carry you or a loved one securely from one floor to another in your home. A stair lift can supply a safe means of transport so that you will no longer need to stress over the threats of falling on the stairs. It is a particularly excellent choice for a senior who lives alone.

3 Essential Uses for Heavy-Duty Stair Lifts In Tolleson

Stair lifts come in a series of sizes and capacities. Compact models accommodate and supply mobility for narrow staircases, supporting as much as 350 pounds while doing so, and at the other end, durable stair lifts offer a larger seat and can deal with a higher range of body types.

1. You Can Supply Access to Almost Everybody

Because of the larger, more powerful design, the stair lift provides ease of access and enhances movement for anybody who’s heavier than average. Nevertheless, the normal stair lift might be too narrow or too short for some, and as the heavy-duty design uses a bigger, higher seat, it even more accommodates anyone who’s taller than average or has problem comfortably utilizing a standard design.

2. Industrial Applications

While not needed to meet ADA requirements, stair lifts offer an added convenience to those with mobility issues.

Within Tolleson a house, a standard lift might accommodate 2 average-sized adults, but what about when you have to deal with the general public? Your customer base, customers, and patients likely been available in a series of sizes and shapes, so the sturdy model basically matches everyone who would need to use the stairs.

Understand that, to set up a durable lift, any staircase must provide 36 inches of space.

3. For Multiple Family Members

What takes place, though, when numerous member of the family need availability? Whether you’re satisfying a current requirement or preparing for a future one, installing a bigger lift takes everybody’s physical requirements into consideration. If your home’s geared up with sufficient space, take preventative measures by having a heavy-duty lift installed.

Call Us Now 844-561-5857 For A No Obligation Quote