Stair Lift Thorp WI

stair lift Thorp

How Stair Lifts Work

A stair lift is essentially a chair that travels along and rail or track that is installed to a stairs.

There is a motor within the base of the chair that is normally powered by a battery also within the base of the chair. The stair lift motor turns a gear that is meshed into a geared strip on the track or rail. When the gear turns the chair is moved along the geared strip. When the motor turns the gear the chair moves one direction, when the motor’s direction is reversed the chair moves the opposite way.

Call/Send switches are used to move the stair lift chair without anybody being on it. This is especially helpful if two individuals use the lift and the lift is at the opposite end of the track when a user wishes to utilize it. the user just calls the lift to come to them using a call/send switch. Another use of call/send switch is to send the lift away after use. Some individuals do not like the look of the lift parked in the main living area of the home in Thorp and will send it to the opposite end when not in use. They merely call it back when needed.

Stair Lift Parts

Although the design and style of stair lifts will vary between producers they all have some fundamental parts common to them all:

Track or Rail – The stair lift track supports the chair, provides a mechanism (usually a geared strip) to move the chair and guides it up and down the stairway just as a train track guides a train.

Track Overruns – Some stair lifts offer the alternative of an overrun at either the top of the track, bottom of the track or both. The function of a stair lift track overrun is to move the user far from the stairs to safely access or dismount the stair lift in a place where, if they fall, they won’t fall on the stairs.

Power supply – While most stair lifts are battery operated today all model will need a power supply to either charge the battery or power the system straight when it comes to non-battery powered systems. Non-battery powered stair lifts draw a lot of power and generally require a dedicated circuit.

Call/Send Controls – Call/Send controls are normally installed on the wall near each end of the stair lift track to offer a way for a user to call the chair to them or send it away when not needed. They can be either cordless or wired to the lift depending on the design.

Seat – The stair lift seat is simply a seat for the user to sit on while using the lift. Depending on the model it might swivel at the top and/or bottom of the track and will typically fold out of the way when not in use.

Seat Belt – As in an automobile the stair lift seat belt is planned to hold the user securely seated on the seat while the lift is in use.

Foot Rest – The foot remainder of the stair lift is a security feature to prevent the the users feet from striking the steps while using the lift and a comfort function to support the user’s feet when sitting on the seat. The foot rest will have switches constructed into them to stop the lift needs to it hit anything on the stairway and will turn up out of the way when the lift is not in use.

Motor – The motor that drives a stair lift chair along the track is found in the base of the seat.

Transmission – Since the motor turns at expensive a speed to safely propel the stair lift the track at type of transmission is utilized to lower the speed while increasing the power available.

Battery Charger – Battery powered stair lifts should have a charger of some sort to keep the battery charged. The battery chargers are normally found under the track or near one end of the track. The battery charger works automatically with no action required by the user.

Battery – The batteries used in stair lifts are relatively costly and found within the base of the seat near the motor. They will need to be replaced at some time however their life span is measured in years and thier replacement should not be a big issue.

How To Measure For Your Stair Lift Installation In Thorp

Measurement 1: Stand at the top of stairs and extend the tape measure down to the landing, letting it rest on edge of each tread. The tape ought to not droop or flex along the way. Record the distance from the edge of the upper landing to where completion of the measuring tape rests on the landing at the bottom of the stairs.

Measurement 2: Measure from the edge of the upper landing (like Measurement 1) to the edge of the first stair’s tread at the bottom.

Measurement 3: Measure the width of your stair’s treads.

Measurement: Measure from the edge of the very first stair at the bottom to the wall (or door), if there is one.

Measurement 5 through 7 Measurements 5-7: These are the tread measurements.

Measurement 8: Measure from the top step to the nearby door, wall or other obstruction at the top of the stairs.

chair lift Thorp

The Advantages of Stair Lifts for Seniors In Thorp Wisconsin

Outdoor stair lift Limited mobility is an issue for numerous seniors and a concern for their families in Thorp. Seniors who want to stay in their houses and remain independent can improve their mobility and stay safe by setting up a stair lift.

A stair lift can transfer you or a loved one safely from one floor to another at home. A stair lift can supply a safe ways of transportation so that you will not need to stress over the dangers of falling on the stairs. It is an especially excellent choice for a senior who lives alone.

3 Important Utilizes for Heavy-Duty Stair Lifts In Thorp

Stair lifts been available in a variety of sizes and capacities. Compact models accommodate and provide movement for narrow staircases, supporting approximately 350 pounds at the same time, and at the other end, heavy-duty stair lifts offer a larger seat and can handle a greater range of body types.

1. You Can Provide Access to Almost Everybody

Because of the larger, more powerful design, the stair lift supplies availability and improves movement for anyone who’s heavier than average. Nevertheless, the common stair lift might be too narrow or too short for some, and as the heavy-duty design uses a bigger, higher seat, it even more accommodates anybody who’s taller than average or has difficulty comfortably using a basic design.

2. Industrial Applications

While not had to meet ADA requirements, stair lifts provide an added benefit to those with movement concerns.

Within Thorp a house, a standard lift might accommodate 2 average-sized adults, but exactly what about when you need to handle the general public? Your client base, customers, and patients most likely can be found in a series of shapes and sizes, so the durable model essentially suits everybody who would need to use the stairs.

Understand that, to set up a heavy-duty lift, any staircase must offer 36 inches of room.

3. For Multiple Family Members

What occurs, however, when multiple member of the family need ease of access? Whether you’re meeting an existing need or anticipating a future one, setting up a bigger lift takes everybody’s physical requirements into consideration. If your house’s equipped with enough space, take preventative measures by having a sturdy lift installed.

Call Us Now 844-561-5857 For A No Obligation Quote