Stair Lift Temple Hills MD
How Stair Lifts Work
A stair lift is basically a chair that travels along and rail or track that is mounted to a stairway.
There is a motor within the base of the chair that is usually powered by a battery also within the base of the chair. The stair lift motor turns a gear that is meshed into a geared strip on the track or rail. When the gear turns the chair is moved along the geared strip. When the motor turns the gear the chair moves one direction, when the motor’s direction is reversed the chair moves the opposite way.
Call/Send switches are utilized to move the stair lift chair without anybody being on it. This is especially useful if 2 individuals utilize the lift and the lift is at the opposite end of the track when a user wants to utilize it. the user just calls the lift to come to them utilizing a call/send switch. Another use of call/send switch is to send the lift away after use. Some people do not like the appearance of the lift parked in the main living area of the home in Temple Hills and will send it to the opposite end when not in use. They just call it back when needed.
Stair Lift Parts
Although the design and style of stair lifts will vary between makers they all have some standard elements typical to them all:
Track or Rail – The stair lift track supports the chair, supplies a system (usually a geared strip) to move the chair and guides it up and down the stairway just as a train track guides a train.
Track Overruns – Some stair lifts offer the choice of an overrun at either the top of the track, bottom of the track or both. The purpose of a stair lift track overrun is to move the user away from the stairway to securely access or dismount the stair lift in a location where, if they fall, they will not fall on the stairs.
Power supply – While most stair lifts are battery ran today all model will require a power supply to either charge the battery or power the unit directly in the case of non-battery powered systems. Non-battery powered stair lifts draw a great deal of power and generally require a devoted circuit.
Call/Send Controls – Call/Send controls are typically installed on the wall near each end of the stair lift track to provide a way for a user to call the chair to them or send it away when not needed. They can be either wireless or wired to the lift depending upon the design.
Seat – The stair lift seat is merely a seat for the user to sit on while using the lift. Depending upon the model it may swivel at the top and/or bottom of the track and will typically fold up out of the way when not in use.
Seat Belt – As in an automobile the stair lift safety belt is meant to hold the user securely seated on the seat while the lift is in usage.
Foot Rest – The foot remainder of the stair lift is a safety function to prevent the the users feet from striking the steps while using the lift and a comfort feature to support the user’s feet when resting on the seat. The foot rest will have switches developed into them to stop the lift must it hit anything on the stairs and will turn up out of the way when the lift is not in use.
Motor – The motor that drives a stair lift chair along the track is found in the base of the seat.
Transmission – Due to the fact that the motor rotates at expensive a speed to safely move the stair lift the track at type of transmission is employed to lower the speed while increasing the power offered.
Battery Battery charger – Battery powered stair lifts need to have a charger of some sort to keep the battery charged. The chargers are typically found under the track or near one end of the track. The battery charger works immediately without any action required by the user.
Battery – The batteries used in stair lifts are relatively pricey and found within the base of the seat near the motor. They will have to be replaced at some time but their life span is measured in years and thier replacement must not be a big concern.
The Best Ways To Measure For Your Stair Lift Installation In Temple Hills
Measurement 1: Stand at the top of stairs and extend the tape measure down to the landing, letting it rest on edge of each tread. The tape must not sag or bend along the way. Record the distance from the edge of the upper landing to where the end of the tape measure rests on the landing at the bottom of the stairs.
Measurement 2: Measure from the edge of the upper landing (like Measurement 1) to the edge of the first stair’s tread at the bottom.
Measurement 3: Determine the width of your stair’s treads.
Measurement: Measure from the edge of the very first stair at the bottom to the wall (or door), if there is one.
Measurement 5 through 7 Measurements 5-7: These are the tread measurements.
Measurement 8: Measure from the top step to the nearest door, wall or other obstruction at the top of the stairs.
The Advantages of Stair Lifts for Seniors In Temple Hills Maryland
Outside stair lift Limited mobility is a problem for numerous senior citizens and an issue for their families in Temple Hills. Seniors who want to remain in their houses and remain independent can improve their mobility and stay safe by setting up a stair lift.
A stair lift can transport you or a loved one safely from one floor to another at home. A stair lift can offer a safe means of transportation so that you will not have to stress over the threats of falling on the stairs. It is an especially great option for an elderly person who lives alone.
3 Necessary Uses for Heavy-Duty Stair Lifts In Temple Hills
Stair lifts been available in a variety of sizes and capacities. Compact models accommodate and provide movement for narrow staircases, supporting up to 350 pounds in the process, and at the other end, durable stair lifts offer a broader seat and can handle a higher variety of body types.
1. You Can Supply Access to Almost Everyone
Because of the larger, stronger design, the stair lift supplies ease of access and improves mobility for anyone who’s heavier than average. However, the common stair lift might be too narrow or too short for some, and as the heavy-duty design provides a larger, higher seat, it even more accommodates anyone who’s taller than average or has trouble conveniently utilizing a basic model.
2. Business Applications
While not had to meet ADA standards, stair lifts offer an added benefit to those with mobility issues.
Within Temple Hills a home, a basic lift might accommodate 2 average-sized adults, but exactly what about when you need to deal with the general public? Your client base, clients, and patients likely been available in a variety of shapes and sizes, so the durable model basically fits everyone who would have to use the stairs.
Be aware that, to install a heavy-duty lift, any staircase needs to provide 36 inches of space.
3. For Several Family Members
What occurs, however, when multiple family members require availability? Whether you’re meeting a present need or expecting a future one, setting up a larger lift takes everyone’s physical requirements into consideration. If your house’s geared up with enough space, take precautions by having a heavy-duty lift installed.
Call Us Now 844-561-5857 For A No Obligation Quote