Stair Lift Sheridan WY

stair lift Sheridan

How Stair Lifts Work

A stair lift is basically a chair that travels along and rail or track that is mounted to a stairs.

There is a motor within the base of the chair that is normally powered by a battery also within the base of the chair. The stair lift motor turns a gear that is meshed into a geared strip on the track or rail. When the gear turns the chair is moved along the geared strip. When the motor turns the gear the chair moves one direction, when the motor’s direction is reversed the chair moves the opposite way.

Call/Send switches are utilized to move the stair lift chair without anyone being on it. This is especially handy if two people utilize the lift and the lift is at the opposite end of the track when a user wishes to use it. the user simply calls the lift to come to them using a call/send switch. Another use of call/send switch is to send the lift away after use. Some individuals don’t like the look of the lift parked in the main living area of the house in Sheridan and will send it to the opposite end when not in use. They just call it back when needed.

Stair Lift Components

Although the design and style of stair lifts will vary between manufacturers they all have some fundamental elements typical to them all:

Track or Rail – The stair lift track supports the chair, offers a system (normally a geared strip) to propel the chair and guides it up and down the stairs just as a train track guides a train.

Track Overruns – Some stair lifts offer the alternative of an overrun at either the top of the track, bottom of the track or both. The purpose of a stair lift track overrun is to move the user far from the stairs to safely access or dismount the stair lift in a place where, if they fall, they won’t fall on the stairs.

Power supply – While many stair lifts are battery ran today all model will need a power supply to either charge the battery or power the unit directly in the case of non-battery powered units. Non-battery powered stair lifts draw a great deal of power and typically require a dedicated circuit.

Call/Send Controls – Call/Send controls are generally mounted on the wall near each end of the stair lift track to offer a method for a user to call the chair to them or send it away when not needed. They can be either cordless or wired to the lift depending upon the design.

Seat – The stair lift seat is simply a seat for the user to rest on while using the lift. Depending on the model it may swivel at the top and/or bottom of the track and will normally fold out of the way when not in use.

Seat Belt – As in a vehicle the stair lift safety belt is intended to hold the user safely seated on the seat while the lift is in usage.

Foot Rest – The foot remainder of the stair lift is a safety function to prevent the the users feet from hitting the steps while utilizing the lift and a comfort feature to support the user’s feet when sitting on the seat. The foot rest will have switches constructed into them to stop the lift needs to it hit anything on the stairway and will turn up out of the way when the lift is not in use.

Motor – The motor that drives a stair lift chair along the track is found in the base of the seat.

Transmission – Due to the fact that the motor rotates at expensive a speed to safely move the stair lift the track at kind of transmission is employed to lower the speed while increasing the power readily available.

Battery Charger – Battery powered stair lifts should have a battery charger of some sort to keep the battery charged. The chargers are typically found under the track or near one end of the track. The battery charger works immediately without any action needed by the user.

Battery – The batteries used in stair lifts are relatively costly and found within the base of the seat near the motor. They will have to be changed at some time but their life expectancy is determined in years and thier replacement should not be a big issue.

The Best Ways To Measure For Your Stair Lift Setup In Sheridan

Measurement 1: Stand at the top of stairs and extend the tape measure down to the landing, letting it rest on edge of each tread. The tape must not droop or flex along the way. Record the distance from the edge of the upper landing to where completion of the measuring tape rests on the landing at the bottom of the stairs.

Measurement 2: Measure from the edge of the upper landing (like Measurement 1) to the edge of the very first stair’s tread at the bottom.

Measurement 3: Measure the width of your stair’s treads.

Measurement: Measure from the edge of the first stair at the bottom to the wall (or door), if there is one.

Measurement 5 through 7 Measurements 5-7: These are the tread measurements.

Measurement 8: Measure from the top step to the nearest door, wall or other obstruction at the top of the stairs.

chair lift Sheridan

The Benefits of Stair Lifts for Senior Citizens In Sheridan Wyoming

Outdoor stair lift Limited movement is an issue for numerous senior citizens and a concern for their families in Sheridan. Senior citizens who want to remain in their homes and remain independent can enhance their mobility and stay safe by installing a stair lift.

A stair lift can transfer you or a loved one securely from one floor to another in your home. A stair lift can offer a safe means of transportation so that you will no longer need to fret about the threats of falling on the stairs. It is a specifically great option for a senior who lives alone.

3 Essential Utilizes for Heavy-Duty Stair Lifts In Sheridan

Stair lifts can be found in a range of sizes and capacities. Compact models accommodate and offer movement for narrow staircases, supporting up to 350 pounds in the process, and at the other end, heavy-duty stair lifts provide a wider seat and can handle a greater range of body types.

1. You Can Provide Access to Almost Everybody

Because of the larger, stronger design, the stair lift provides ease of access and improves mobility for anybody who’s much heavier than average. Nevertheless, the typical stair lift might be too narrow or too short for some, and as the heavy-duty design provides a larger, higher seat, it further accommodates anybody who’s taller than average or has difficulty easily using a standard design.

2. Industrial Applications

While not needed to meet ADA standards, stair lifts offer an added convenience to those with mobility issues.

Within Sheridan a house, a standard lift might accommodate two average-sized adults, however what about when you have to deal with the general public? Your client base, clients, and patients most likely come in a range of sizes and shapes, so the heavy-duty model essentially matches everybody who would need to use the stairs.

Know that, to install a sturdy lift, any staircase needs to offer 36 inches of space.

3. For Numerous Household Members

What happens, however, when several family members need accessibility? Whether you’re satisfying an existing requirement or preparing for a future one, setting up a larger lift takes everyone’s physical needs into consideration. If your house’s equipped with adequate area, take safety measures by having a sturdy lift set up.

Call Us Now 844-561-5857 For A No Obligation Quote