Stair Lift Robbinsville NC
How Stair Lifts Work
A stair lift is basically a chair that travels along and rail or track that is mounted to a stairway.
There is a motor within the base of the chair that is generally powered by a battery also within the base of the chair. The stair lift motor turns a gear that is meshed into a geared strip on the track or rail. When the gear turns the chair is moved along the geared strip. When the motor turns the gear the chair moves one direction, when the motor’s direction is reversed the chair moves the opposite way.
Call/Send switches are utilized to move the stair lift chair without anybody being on it. This is particularly helpful if 2 individuals utilize the lift and the lift is at the opposite end of the track when a user wants to utilize it. the user just calls the lift to come to them using a call/send switch. Another use of call/send switch is to send the lift away after usage. Some people do not like the look of the lift parked in the main living area of the house in Robbinsville and will send it to the opposite end when not in use. They just call it back when needed.
Stair Lift Components
Although the design and style of stair lifts will vary between makers they all have some fundamental components common to them all:
Track or Rail – The stair lift track supports the chair, provides a system (typically a geared strip) to move the chair and guides it up and down the staircase just as a train track guides a train.
Track Overruns – Some stair lifts use the alternative of an overrun at either the top of the track, bottom of the track or both. The purpose of a stair lift track overrun is to move the user far from the stairs to safely access or dismount the stair lift in a location where, if they fall, they won’t fall on the stairs.
Power supply – While most stair lifts are battery ran today all model will need a power supply to either charge the battery or power the unit straight when it comes to non-battery powered systems. Non-battery powered stair lifts draw a great deal of power and generally require a dedicated circuit.
Call/Send Controls – Call/Send controls are typically installed on the wall near each end of the stair lift track to supply a method for a user to call the chair to them or send it away when not needed. They can be either cordless or wired to the lift depending upon the design.
Seat – The stair lift seat is just a seat for the user to rest on while utilizing the lift. Depending on the model it might rotate at the top and/or bottom of the track and will normally fold up out of the way when not in use.
Seat Belt – As in a car the stair lift safety belt is intended to hold the user safely seated on the seat while the lift is in use.
Foot Rest – The foot remainder of the stair lift is a safety function to prevent the the users feet from striking the steps while using the lift and a comfort function to support the user’s feet when resting on the seat. The foot rest will have switches constructed into them to stop the lift needs to it strike anything on the stairway and will turn up out of the way when the lift is not in use.
Motor – The motor that drives a stair lift chair along the track is found in the base of the seat.
Transmission – Because the motor rotates at too expensive a speed to safely propel the stair lift the track at kind of transmission is employed to reduce the speed while increasing the power offered.
Battery Battery charger – Battery powered stair lifts must have a battery charger of some sort to keep the battery charged. The chargers are usually found under the track or near one end of the track. The battery charger works instantly with no action needed by the user.
Battery – The batteries utilized in stair lifts are fairly expensive and found within the base of the seat near the motor. They will need to be replaced at some time however their life span is measured in years and thier replacement must not be a big issue.
How To Measure For Your Stair Lift Setup In Robbinsville
Measurement 1: Stand at the top of stairs and extend the tape measure down to the landing, letting it rest on edge of each tread. The tape should not droop or bend along the way. Record the distance from the edge of the upper landing to where the end of the measuring tape rests on the landing at the bottom of the stairs.
Measurement 2: Measure from the edge of the upper landing (like Measurement 1) to the edge of the first stair’s tread at the bottom.
Measurement 3: Measure the width of your stair’s treads.
Measurement: Measure from the edge of the first stair at the bottom to the wall (or door), if there is one.
Measurement 5 through 7 Measurements 5-7: These are the tread measurements.
Measurement 8: Measure from the top step to the nearby door, wall or other obstruction at the top of the stairs.
The Benefits of Stair Lifts for Seniors In Robbinsville North Carolina
Outdoor stair lift Limited movement is a problem for lots of senior citizens and an issue for their families in Robbinsville. Seniors who want to remain in their houses and remain independent can improve their movement and remain safe by setting up a stair lift.
A stair lift can transfer you or a loved one securely from one floor to another in your home. A stair lift can provide a safe ways of transport so that you will not have to stress over the threats of falling on the stairs. It is a specifically good choice for an elderly person who lives alone.
3 Vital Uses for Heavy-Duty Stair Lifts In Robbinsville
Stair lifts can be found in a range of sizes and capacities. Compact models accommodate and provide mobility for narrow staircases, supporting up to 350 pounds in the process, and at the other end, heavy-duty stair lifts use a wider seat and can deal with a higher range of body types.
1. You Can Supply Access to Nearly Everybody
Because of the larger, stronger design, the stair lift offers accessibility and improves mobility for anybody who’s much heavier than average. However, the typical stair lift might be too narrow or too short for some, and as the heavy-duty design provides a bigger, higher seat, it further accommodates anybody who’s taller than average or has problem comfortably utilizing a basic model.
2. Business Applications
While not needed to fulfill ADA requirements, stair lifts supply an added benefit to those with mobility issues.
Within Robbinsville a house, a standard lift might accommodate 2 average-sized adults, however what about when you need to deal with the public? Your client base, clients, and patients most likely come in a variety of sizes and shapes, so the sturdy model essentially suits everyone who would have to utilize the stairs.
Know that, to install a heavy-duty lift, any staircase must supply 36 inches of space.
3. For Several Family Members
What takes place, however, when several family members need ease of access? Whether you’re meeting a present need or anticipating a future one, setting up a larger lift takes everybody’s physical requirements into consideration. If your home’s equipped with adequate space, take safety measures by having a durable lift set up.
Call Us Now 844-561-5857 For A No Obligation Quote