Stair Lift Riverdale MD

stair lift Riverdale

How Stair Lifts Work

A stair lift is essentially a chair that travels along and rail or track that is mounted to a staircase.

There is a motor within the base of the chair that is generally powered by a battery also within the base of the chair. The stair lift motor turns a gear that is meshed into a geared strip on the track or rail. When the gear turns the chair is moved along the geared strip. When the motor turns the gear the chair moves one direction, when the motor’s direction is reversed the chair moves the opposite way.

Call/Send switches are utilized to move the stair lift chair without anyone being on it. This is particularly valuable if 2 people use the lift and the lift is at the opposite end of the track when a user wishes to utilize it. the user merely calls the lift to come to them utilizing a call/send switch. Another use of call/send switch is to send the lift away after use. Some individuals don’t like the appearance of the lift parked in the main living area of the home in Riverdale and will send it to the opposite end when not in use. They just call it back when required.

Stair Lift Components

Although the design and style of stair lifts will vary between makers they all have some basic parts common to them all:

Track or Rail – The stair lift track supports the chair, offers a mechanism (typically a geared strip) to propel the chair and guides it up and down the stairs just as a train track guides a train.

Track Overruns – Some stair lifts provide the alternative of an overrun at either the top of the track, bottom of the track or both. The function of a stair lift track overrun is to move the user far from the stairs to safely access or dismount the stair lift in a place where, if they fall, they will not fall on the stairs.

Power supply – While most stair lifts are battery ran today all model will require a power supply to either charge the battery or power the system directly in the case of non-battery powered systems. Non-battery powered stair lifts draw a lot of power and normally require a devoted circuit.

Call/Send Controls – Call/Send controls are typically installed on the wall near each end of the stair lift track to offer a method for a user to call the chair to them or send it away when not needed. They can be either cordless or wired to the lift depending on the design.

Seat – The stair lift seat is simply a seat for the user to sit on while using the lift. Depending upon the model it might swivel at the top and/or bottom of the track and will normally fold up out of the way when not in use.

Seat Belt – As in an automobile the stair lift safety belt is planned to hold the user securely seated on the seat while the lift is in use.

Foot Rest – The foot rest of the stair lift is a security function to prevent the the users feet from hitting the steps while utilizing the lift and a comfort function to support the user’s feet when resting on the seat. The foot rest will have switches constructed into them to stop the lift ought to it strike anything on the staircase and will flip up out of the way when the lift is not in use.

Motor – The motor that drives a stair lift chair along the track is found in the base of the seat.

Transmission – Since the motor turns at expensive a speed to securely move the stair lift the track at type of transmission is employed to minimize the speed while increasing the power available.

Battery Charger – Battery powered stair lifts must have a battery charger of some sort to keep the battery charged. The battery chargers are generally found under the track or near one end of the track. The charger works immediately without any action required by the user.

Battery – The batteries used in stair lifts are fairly expensive and found within the base of the seat near the motor. They will have to be replaced at some time but their life span is measured in years and thier replacement ought to not be a huge issue.

How To Measure For Your Stair Lift Installation In Riverdale

Measurement 1: Stand at the top of stairs and extend the tape measure down to the landing, letting it rest on edge of each tread. The tape should not sag or bend along the way. Record the distance from the edge of the upper landing to where completion of the tape measure rests on the landing at the bottom of the stairs.

Measurement 2: Measure from the edge of the upper landing (like Measurement 1) to the edge of the first stair’s tread at the bottom.

Measurement 3: Determine the width of your stair’s treads.

Measurement: Measure from the edge of the very first stair at the bottom to the wall (or door), if there is one.

Measurement 5 through 7 Measurements 5-7: These are the tread measurements.

Measurement 8: Measure from the top step to the nearest door, wall or other obstruction at the top of the stairs.

chair lift Riverdale

The Benefits of Stair Lifts for Seniors In Riverdale Maryland

Outside stair lift Limited mobility is a problem for numerous seniors and an issue for their families in Riverdale. Senior citizens who want to stay in their homes and stay independent can improve their movement and stay safe by installing a stair lift.

A stair lift can transport you or a loved one securely from one floor to another in the house. A stair lift can offer a safe ways of transport so that you will not have to worry about the dangers of falling on the stairs. It is an especially great choice for an elderly person who lives alone.

3 Important Utilizes for Heavy-Duty Stair Lifts In Riverdale

Stair lifts can be found in a series of sizes and capacities. Compact models accommodate and provide mobility for narrow staircases, supporting as much as 350 pounds while doing so, and at the other end, heavy-duty stair lifts provide a broader seat and can manage a greater variety of body types.

1. You Can Supply Access to Nearly Everybody

Because of the bigger, stronger design, the stair lift offers availability and improves mobility for anyone who’s heavier than average. Nevertheless, the normal stair lift might be too narrow or too short for some, and as the durable design uses a bigger, greater seat, it further accommodates anyone who’s taller than average or has difficulty comfortably using a basic design.

2. Business Applications

While not needed to fulfill ADA standards, stair lifts provide an added convenience to those with mobility issues.

Within Riverdale a house, a basic lift might accommodate two average-sized adults, but what about when you have to handle the public? Your customer base, customers, and patients most likely can be found in a variety of shapes and sizes, so the sturdy model essentially suits everyone who would need to use the stairs.

Be aware that, to set up a sturdy lift, any staircase should offer 36 inches of room.

3. For Multiple Household Members

What happens, though, when numerous family members need accessibility? Whether you’re satisfying a present requirement or preparing for a future one, installing a larger lift takes everybody’s physical requirements into consideration. If your home’s geared up with adequate area, take precautions by having a sturdy lift set up.

Call Us Now 844-561-5857 For A No Obligation Quote