Stair Lift Rawlins WY
How Stair Lifts Work
A stair lift is essentially a chair that travels along and rail or track that is mounted to a staircase.
There is a motor within the base of the chair that is generally powered by a battery also within the base of the chair. The stair lift motor turns a gear that is meshed into a geared strip on the track or rail. When the gear turns the chair is moved along the geared strip. When the motor turns the gear the chair moves one direction, when the motor’s direction is reversed the chair moves the opposite way.
Call/Send switches are used to move the stair lift chair without anyone being on it. This is especially useful if 2 individuals use the lift and the lift is at the opposite end of the track when a user wishes to utilize it. the user simply calls the lift to come to them using a call/send switch. Another use of call/send switch is to send the lift away after use. Some individuals do not like the look of the lift parked in the main living area of the home in Rawlins and will send it to the opposite end when not in use. They simply call it back when needed.
Stair Lift Components
Although the design and style of stair lifts will vary between makers they all have some fundamental components typical to them all:
Track or Rail – The stair lift track supports the chair, offers a mechanism (generally a geared strip) to move the chair and guides it up and down the staircase just as a train track guides a train.
Track Overruns – Some stair lifts offer the choice of an overrun at either the top of the track, bottom of the track or both. The purpose of a stair lift track overrun is to move the user far from the stairs to securely access or dismount the stair lift in a place where, if they fall, they won’t fall on the stairs.
Power supply – While most stair lifts are battery ran today all model will require a power supply to either charge the battery or power the unit directly when it comes to non-battery powered systems. Non-battery powered stair lifts draw a lot of power and usually require a dedicated circuit.
Call/Send Controls – Call/Send controls are typically installed on the wall near each end of the stair lift track to supply a method for a user to call the chair to them or send it away when not required. They can be either cordless or wired to the lift depending on the model.
Seat – The stair lift seat is just a seat for the user to rest on while using the lift. Depending on the model it might swivel at the top and/or bottom of the track and will generally fold out of the way when not in use.
Seat Belt – As in a vehicle the stair lift seat belt is planned to hold the user safely seated on the seat while the lift remains in use.
Foot Rest – The foot remainder of the stair lift is a safety feature to prevent the the users feet from striking the steps while using the lift and a comfort function to support the user’s feet when resting on the seat. The foot rest will have switches constructed into them to stop the lift ought to it hit anything on the stairs and will flip up out of the way when the lift is not in use.
Motor – The motor that drives a stair lift chair along the track is found in the base of the seat.
Transmission – Since the motor rotates at too high a speed to safely move the stair lift the track at type of transmission is used to decrease the speed while increasing the power offered.
Battery Battery charger – Battery powered stair lifts should have a battery charger of some sort to keep the battery charged. The chargers are generally found under the track or near one end of the track. The battery charger works automatically with no action required by the user.
Battery – The batteries used in stair lifts are fairly pricey and found within the base of the seat near the motor. They will need to be changed at some time however their life span is measured in years and thier replacement need to not be a huge concern.
The Best Ways To Measure For Your Stair Lift Installation In Rawlins
Measurement 1: Stand at the top of stairs and extend the measuring tape down to the landing, letting it rest on edge of each tread. The tape should not sag or bend along the way. Record the distance from the edge of the upper landing to where the end of the tape measure rests on the landing at the bottom of the stairs.
Measurement 2: Measure from the edge of the upper landing (like Measurement 1) to the edge of the first stair’s tread at the bottom.
Measurement 3: Determine the width of your stair’s treads.
Measurement: Measure from the edge of the very first stair at the bottom to the wall (or door), if there is one.
Measurement 5 through 7 Measurements 5-7: These are the tread measurements.
Measurement 8: Measure from the top step to the nearest door, wall or other obstruction at the top of the stairs.
The Benefits of Stair Lifts for Senior Citizens In Rawlins Wyoming
Outside stair lift Limited movement is a concern for lots of seniors and an issue for their families in Rawlins. Elderly people who wish to stay in their houses and remain independent can improve their movement and remain safe by setting up a stair lift.
A stair lift can carry you or a loved one securely from one floor to another in the house. A stair lift can offer a safe ways of transportation so that you will not need to worry about the risks of falling on the stairs. It is a particularly excellent option for a senior citizen who lives alone.
3 Necessary Utilizes for Heavy-Duty Stair Lifts In Rawlins
Stair lifts been available in a series of sizes and capacities. Compact models accommodate and supply movement for narrow staircases, supporting as much as 350 pounds in the process, and at the other end, durable stair lifts offer a wider seat and can manage a higher range of body types.
1. You Can Supply Access to Almost Everybody
Because of the larger, stronger design, the stair lift supplies availability and enhances movement for anybody who’s much heavier than average. However, the normal stair lift might be too narrow or too short for some, and as the heavy-duty design uses a bigger, greater seat, it further accommodates anyone who’s taller than average or has trouble conveniently utilizing a basic model.
2. Industrial Applications
While not had to meet ADA requirements, stair lifts offer an added benefit to those with mobility concerns.
Within Rawlins a house, a basic lift might accommodate two average-sized adults, however what about when you need to deal with the public? Your client base, customers, and patients most likely come in a range of sizes and shapes, so the heavy-duty model basically suits everyone who would have to use the stairs.
Be aware that, to set up a durable lift, any staircase should provide 36 inches of room.
3. For Numerous Household Members
What happens, however, when multiple member of the family require accessibility? Whether you’re fulfilling a present requirement or expecting a future one, setting up a larger lift takes everyone’s physical needs into consideration. If your home’s geared up with sufficient area, take preventative measures by having a heavy-duty lift set up.
Call Us Now 844-561-5857 For A No Obligation Quote