Stair Lift Paxton MA

stair lift Paxton

How Stair Lifts Work

A stair lift is essentially a chair that travels along and rail or track that is installed to a staircase.

There is a motor within the base of the chair that is generally powered by a battery also within the base of the chair. The stair lift motor turns a gear that is meshed into a geared strip on the track or rail. When the gear turns the chair is moved along the geared strip. When the motor turns the gear the chair moves one direction, when the motor’s direction is reversed the chair moves the opposite way.

Call/Send switches are used to move the stair lift chair without anybody being on it. This is especially helpful if 2 people utilize the lift and the lift is at the opposite end of the track when a user wishes to utilize it. the user just calls the lift to come to them utilizing a call/send switch. Another use of call/send switch is to send the lift away after usage. Some people don’t like the appearance of the lift parked in the main living area of the house in Paxton and will send it to the opposite end when not in use. They just call it back when needed.

Stair Lift Components

Although the design and style of stair lifts will vary between makers they all have some standard components common to them all:

Track or Rail – The stair lift track supports the chair, provides a mechanism (typically a geared strip) to move the chair and guides it up and down the stairway just as a train track guides a train.

Track Overruns – Some stair lifts use the option of an overrun at either the top of the track, bottom of the track or both. The function of a stair lift track overrun is to move the user far from the staircase to safely access or dismount the stair lift in a place where, if they fall, they will not fall on the stairs.

Power supply – While most stair lifts are battery ran today all model will require a power supply to either charge the battery or power the unit directly when it comes to non-battery powered systems. Non-battery powered stair lifts draw a lot of power and normally require a dedicated circuit.

Call/Send Controls – Call/Send controls are usually mounted on the wall near each end of the stair lift track to offer a method for a user to call the chair to them or send it away when not required. They can be either cordless or wired to the lift depending on the model.

Seat – The stair lift seat is just a seat for the user to sit on while utilizing the lift. Depending upon the model it may swivel at the top and/or bottom of the track and will generally fold out of the way when not in use.

Seat Belt – As in a car the stair lift seat belt is planned to hold the user safely seated on the seat while the lift is in use.

Foot Rest – The foot remainder of the stair lift is a safety function to prevent the the users feet from hitting the steps while utilizing the lift and a comfort function to support the user’s feet when resting on the seat. The foot rest will have switches developed into them to stop the lift should it strike anything on the staircase and will turn up out of the way when the lift is not in use.

Motor – The motor that drives a stair lift chair along the track is found in the base of the seat.

Transmission – Because the motor turns at too high a speed to safely move the stair lift the track at type of transmission is used to lower the speed while increasing the power available.

Battery Battery charger – Battery powered stair lifts must have a battery charger of some sort to keep the battery charged. The battery chargers are generally found under the track or near one end of the track. The charger works automatically without any action needed by the user.

Battery – The batteries used in stair lifts are fairly pricey and found within the base of the seat near the motor. They will need to be changed at some time however their life expectancy is determined in years and thier replacement need to not be a big issue.

Ways To Measure For Your Stair Lift Setup In Paxton

Measurement 1: Stand at the top of stairs and extend the tape measure down to the landing, letting it rest on edge of each tread. The tape must not sag or flex along the way. Record the distance from the edge of the upper landing to where the end of the tape measure rests on the landing at the bottom of the stairs.

Measurement 2: Measure from the edge of the upper landing (like Measurement 1) to the edge of the very first stair’s tread at the bottom.

Measurement 3: Measure the width of your stair’s treads.

Measurement: Measure from the edge of the very first stair at the bottom to the wall (or door), if there is one.

Measurement 5 through 7 Measurements 5-7: These are the tread measurements.

Measurement 8: Measure from the top step to the nearest door, wall or other obstruction at the top of the stairs.

chair lift Paxton

The Benefits of Stair Lifts for Senior Citizens In Paxton Massachusetts

Outdoor stair lift Limited mobility is a problem for numerous seniors and a concern for their families in Paxton. Seniors who wish to remain in their houses and remain independent can enhance their movement and stay safe by installing a stair lift.

A stair lift can carry you or a loved one securely from one floor to another in your home. A stair lift can supply a safe ways of transportation so that you will not have to stress over the dangers of falling on the stairs. It is a specifically great alternative for a senior citizen who lives alone.

3 Vital Uses for Heavy-Duty Stair Lifts In Paxton

Stair lifts been available in a variety of sizes and capacities. Compact models accommodate and supply mobility for narrow staircases, supporting up to 350 pounds at the same time, and at the other end, durable stair lifts use a wider seat and can manage a greater variety of body types.

1. You Can Offer Access to Almost Everybody

Because of the bigger, stronger design, the stair lift provides ease of access and enhances movement for anyone who’s heavier than average. Nevertheless, the normal stair lift might be too narrow or too short for some, and as the heavy-duty design uses a bigger, greater seat, it even more accommodates anybody who’s taller than average or has problem easily utilizing a basic design.

2. Industrial Applications

While not needed to meet ADA requirements, stair lifts provide an added benefit to those with mobility issues.

Within Paxton a house, a basic lift might accommodate 2 average-sized adults, however exactly what about when you have to handle the public? Your client base, customers, and patients most likely been available in a series of shapes and sizes, so the sturdy model essentially fits everyone who would have to use the stairs.

Know that, to install a sturdy lift, any staircase must provide 36 inches of space.

3. For Multiple Household Members

Exactly what happens, though, when numerous member of the family require accessibility? Whether you’re fulfilling an existing need or preparing for a future one, setting up a bigger lift takes everybody’s physical requirements into consideration. If your home’s geared up with sufficient space, take precautions by having a heavy-duty lift set up.

Call Us Now 844-561-5857 For A No Obligation Quote