Stair Lift Otis MA

stair lift Otis

How Stair Lifts Work

A stair lift is essentially a chair that travels along and rail or track that is mounted to a staircase.

There is a motor within the base of the chair that is normally powered by a battery also within the base of the chair. The stair lift motor turns a gear that is meshed into a geared strip on the track or rail. When the gear turns the chair is moved along the geared strip. When the motor turns the gear the chair moves one direction, when the motor’s direction is reversed the chair moves the opposite way.

Call/Send switches are used to move the stair lift chair without anybody being on it. This is especially practical if two individuals use the lift and the lift is at the opposite end of the track when a user wishes to use it. the user just calls the lift to come to them using a call/send switch. Another use of call/send switch is to send the lift away after usage. Some people do not like the look of the lift parked in the main living area of the house in Otis and will send it to the opposite end when not in use. They just call it back when required.

Stair Lift Components

Although the design and style of stair lifts will vary between makers they all have some standard parts common to them all:

Track or Rail – The stair lift track supports the chair, provides a mechanism (generally a geared strip) to move the chair and guides it up and down the staircase just as a train track guides a train.

Track Overruns – Some stair lifts offer the option of an overrun at either the top of the track, bottom of the track or both. The purpose of a stair lift track overrun is to move the user far from the stairs to safely access or dismount the stair lift in a place where, if they fall, they will not fall on the stairs.

Power supply – While many stair lifts are battery ran today all model will require a power supply to either charge the battery or power the system directly when it comes to non-battery powered systems. Non-battery powered stair lifts draw a lot of power and usually need a dedicated circuit.

Call/Send Controls – Call/Send controls are normally mounted on the wall near each end of the stair lift track to provide a way for a user to call the chair to them or send it away when not required. They can be either wireless or wired to the lift depending upon the design.

Seat – The stair lift seat is just a seat for the user to rest on while using the lift. Depending upon the model it may swivel at the top and/or bottom of the track and will normally fold up out of the way when not in use.

Seat Belt – As in an automobile the stair lift seat belt is intended to hold the user safely seated on the seat while the lift is in usage.

Foot Rest – The foot rest of the stair lift is a security feature to prevent the the users feet from striking the steps while using the lift and a comfort function to support the user’s feet when resting on the seat. The foot rest will have switches developed into them to stop the lift must it strike anything on the stairs and will flip up out of the way when the lift is not in use.

Motor – The motor that drives a stair lift chair along the track is found in the base of the seat.

Transmission – Due to the fact that the motor rotates at expensive a speed to safely propel the stair lift the track at type of transmission is utilized to decrease the speed while increasing the power readily available.

Battery Battery charger – Battery powered stair lifts should have a battery charger of some sort to keep the battery charged. The chargers are normally found under the track or near one end of the track. The battery charger works instantly without any action required by the user.

Battery – The batteries utilized in stair lifts are fairly pricey and found within the base of the seat near the motor. They will have to be replaced at some time but their life span is measured in years and thier replacement should not be a huge issue.

How To Measure For Your Stair Lift Setup In Otis

Measurement 1: Stand at the top of stairs and extend the tape measure down to the landing, letting it rest on edge of each tread. The tape must not sag or bend along the way. Record the distance from the edge of the upper landing to where completion of the measuring tape rests on the landing at the bottom of the stairs.

Measurement 2: Measure from the edge of the upper landing (like Measurement 1) to the edge of the very first stair’s tread at the bottom.

Measurement 3: Determine the width of your stair’s treads.

Measurement: Measure from the edge of the first stair at the bottom to the wall (or door), if there is one.

Measurement 5 through 7 Measurements 5-7: These are the tread measurements.

Measurement 8: Measure from the top step to the nearest door, wall or other obstruction at the top of the stairs.

chair lift Otis

The Advantages of Stair Lifts for Seniors In Otis Massachusetts

Outdoor stair lift Limited mobility is an issue for numerous seniors and a concern for their families in Otis. Senior citizens who want to remain in their houses and stay independent can enhance their movement and remain safe by setting up a stair lift.

A stair lift can transfer you or a loved one safely from one floor to another at home. A stair lift can supply a safe ways of transport so that you will no longer have to worry about the risks of falling on the stairs. It is an especially good alternative for a senior who lives alone.

3 Necessary Uses for Heavy-Duty Stair Lifts In Otis

Stair lifts can be found in a variety of sizes and capacities. Compact models accommodate and provide mobility for narrow staircases, supporting approximately 350 pounds while doing so, and at the other end, durable stair lifts offer a broader seat and can deal with a greater range of body types.

1. You Can Provide Access to Almost Everyone

Because of the larger, stronger design, the stair lift offers accessibility and enhances movement for anyone who’s heavier than average. However, the typical stair lift might be too narrow or too short for some, and as the sturdy design provides a larger, greater seat, it further accommodates anyone who’s taller than average or has trouble comfortably utilizing a standard model.

2. Industrial Applications

While not had to meet ADA requirements, stair lifts provide an added convenience to those with mobility concerns.

Within Otis a house, a basic lift might accommodate 2 average-sized adults, however what about when you have to deal with the general public? Your customer base, customers, and patients likely come in a series of shapes and sizes, so the durable model basically fits everyone who would have to use the stairs.

Know that, to install a durable lift, any staircase needs to provide 36 inches of room.

3. For Numerous Household Members

What takes place, however, when numerous family members need ease of access? Whether you’re satisfying an existing need or preparing for a future one, installing a bigger lift takes everybody’s physical needs into consideration. If your house’s equipped with enough space, take preventative measures by having a durable lift set up.

Call Us Now 844-561-5857 For A No Obligation Quote