Stair Lift Moran WY

stair lift Moran

How Stair Lifts Work

A stair lift is generally a chair that travels along and rail or track that is mounted to a stairs.

There is a motor within the base of the chair that is typically powered by a battery also within the base of the chair. The stair lift motor turns a gear that is meshed into a geared strip on the track or rail. When the gear turns the chair is moved along the geared strip. When the motor turns the gear the chair moves one direction, when the motor’s direction is reversed the chair moves the opposite way.

Call/Send switches are utilized to move the stair lift chair without anyone being on it. This is especially helpful if two individuals utilize the lift and the lift is at the opposite end of the track when a user wants to utilize it. the user simply calls the lift to come to them using a call/send switch. Another use of call/send switch is to send out the lift away after use. Some individuals don’t like the look of the lift parked in the main living area of the house in Moran and will send it to the opposite end when not in use. They just call it back when required.

Stair Lift Components

Although the design and style of stair lifts will vary between producers they all have some fundamental components common to them all:

Track or Rail – The stair lift track supports the chair, provides a mechanism (typically a geared strip) to move the chair and guides it up and down the staircase just as a train track guides a train.

Track Overruns – Some stair lifts use the choice of an overrun at either the top of the track, bottom of the track or both. The purpose of a stair lift track overrun is to move the user away from the staircase to securely access or dismount the stair lift in a location where, if they fall, they will not fall on the stairs.

Power supply – While the majority of stair lifts are battery operated today all model will require a power supply to either charge the battery or power the system directly when it comes to non-battery powered units. Non-battery powered stair lifts draw a lot of power and normally need a devoted circuit.

Call/Send Controls – Call/Send controls are typically installed on the wall near each end of the stair lift track to offer a method for a user to call the chair to them or send it away when not required. They can be either cordless or wired to the lift depending on the design.

Seat – The stair lift seat is simply a seat for the user to sit on while using the lift. Depending upon the model it may swivel at the top and/or bottom of the track and will usually fold out of the way when not in use.

Seat Belt – As in a car the stair lift seat belt is intended to hold the user securely seated on the seat while the lift is in use.

Foot Rest – The foot rest of the stair lift is a security feature to prevent the the users feet from hitting the steps while using the lift and a comfort function to support the user’s feet when resting on the seat. The foot rest will have switches constructed into them to stop the lift ought to it strike anything on the staircase and will flip up out of the way when the lift is not in use.

Motor – The motor that drives a stair lift chair along the track is found in the base of the seat.

Transmission – Because the motor turns at expensive a speed to securely move the stair lift the track at kind of transmission is utilized to reduce the speed while increasing the power available.

Battery Charger – Battery powered stair lifts should have a battery charger of some sort to keep the battery charged. The battery chargers are normally found under the track or near one end of the track. The battery charger works automatically with no action needed by the user.

Battery – The batteries used in stair lifts are relatively pricey and found within the base of the seat near the motor. They will have to be replaced at some time however their life expectancy is measured in years and thier replacement must not be a huge concern.

Ways To Measure For Your Stair Lift Setup In Moran

Measurement 1: Stand at the top of stairs and extend the measuring tape down to the landing, letting it rest on edge of each tread. The tape should not sag or bend along the way. Record the distance from the edge of the upper landing to where the end of the tape measure rests on the landing at the bottom of the stairs.

Measurement 2: Measure from the edge of the upper landing (like Measurement 1) to the edge of the first stair’s tread at the bottom.

Measurement 3: Measure the width of your stair’s treads.

Measurement: Measure from the edge of the first stair at the bottom to the wall (or door), if there is one.

Measurement 5 through 7 Measurements 5-7: These are the tread measurements.

Measurement 8: Measure from the top step to the nearest door, wall or other obstruction at the top of the stairs.

chair lift Moran

The Benefits of Stair Lifts for Senior Citizens In Moran Wyoming

Outside stair lift Limited movement is an issue for many senior citizens and a concern for their families in Moran. Senior citizens who want to remain in their houses and stay independent can enhance their movement and stay safe by installing a stair lift.

A stair lift can transfer you or a loved one securely from one floor to another in the house. A stair lift can provide a safe ways of transportation so that you will not have to stress over the threats of falling on the stairs. It is an especially great alternative for a senior who lives alone.

3 Necessary Utilizes for Heavy-Duty Stair Lifts In Moran

Stair lifts been available in a series of sizes and capacities. Compact models accommodate and provide mobility for narrow staircases, supporting as much as 350 pounds while doing so, and at the other end, sturdy stair lifts offer a broader seat and can manage a higher variety of body types.

1. You Can Supply Access to Nearly Everybody

Because of the bigger, more powerful design, the stair lift supplies availability and enhances movement for anyone who’s heavier than average. However, the typical stair lift might be too narrow or too short for some, and as the heavy-duty design offers a bigger, higher seat, it even more accommodates anybody who’s taller than average or has trouble comfortably using a basic design.

2. Commercial Applications

While not needed to satisfy ADA requirements, stair lifts provide an added benefit to those with mobility issues.

Within Moran a house, a basic lift might accommodate 2 average-sized adults, however what about when you need to deal with the public? Your customer base, clients, and patients likely come in a range of shapes and sizes, so the durable model essentially matches everyone who would have to use the stairs.

Understand that, to set up a heavy-duty lift, any staircase needs to offer 36 inches of space.

3. For Multiple Family Members

What occurs, however, when multiple family members need ease of access? Whether you’re satisfying a present requirement or anticipating a future one, setting up a bigger lift takes everybody’s physical requirements into consideration. If your house’s geared up with sufficient space, take precautions by having a durable lift set up.

Call Us Now 844-561-5857 For A No Obligation Quote