Stair Lift Millville MA
How Stair Lifts Work
A stair lift is essentially a chair that travels along and rail or track that is mounted to a staircase.
There is a motor within the base of the chair that is typically powered by a battery also within the base of the chair. The stair lift motor turns a gear that is meshed into a geared strip on the track or rail. When the gear turns the chair is moved along the geared strip. When the motor turns the gear the chair moves one direction, when the motor’s direction is reversed the chair moves the opposite way.
Call/Send switches are utilized to move the stair lift chair without anyone being on it. This is especially practical if two people use the lift and the lift is at the opposite end of the track when a user wishes to use it. the user simply calls the lift to come to them using a call/send switch. Another use of call/send switch is to send the lift away after usage. Some people do not like the look of the lift parked in the main living area of the house in Millville and will send it to the opposite end when not in use. They just call it back when needed.
Stair Lift Parts
Although the design and style of stair lifts will vary between manufacturers they all have some basic parts typical to them all:
Track or Rail – The stair lift track supports the chair, provides a system (typically a geared strip) to propel the chair and guides it up and down the staircase just as a train track guides a train.
Track Overruns – Some stair lifts offer the choice of an overrun at either the top of the track, bottom of the track or both. The purpose of a stair lift track overrun is to move the user far from the stairs to safely access or dismount the stair lift in an area where, if they fall, they will not fall on the stairs.
Power supply – While many stair lifts are battery operated today all model will require a power supply to either charge the battery or power the system directly in the case of non-battery powered units. Non-battery powered stair lifts draw a lot of power and usually require a dedicated circuit.
Call/Send Controls – Call/Send controls are generally installed on the wall near each end of the stair lift track to supply a method for a user to call the chair to them or send it away when not required. They can be either cordless or wired to the lift depending upon the design.
Seat – The stair lift seat is simply a seat for the user to rest on while using the lift. Depending upon the model it may swivel at the top and/or bottom of the track and will generally fold out of the way when not in use.
Seat Belt – As in an automobile the stair lift seat belt is intended to hold the user securely seated on the seat while the lift remains in use.
Foot Rest – The foot remainder of the stair lift is a safety feature to prevent the the users feet from hitting the steps while using the lift and a comfort feature to support the user’s feet when sitting on the seat. The foot rest will have switches developed into them to stop the lift must it hit anything on the stairs and will flip up out of the way when the lift is not in use.
Motor – The motor that drives a stair lift chair along the track is found in the base of the seat.
Transmission – Due to the fact that the motor turns at expensive a speed to safely propel the stair lift the track at type of transmission is used to lower the speed while increasing the power offered.
Battery Charger – Battery powered stair lifts should have a charger of some sort to keep the battery charged. The battery chargers are normally found under the track or near one end of the track. The battery charger works immediately without any action required by the user.
Battery – The batteries utilized in stair lifts are relatively costly and found within the base of the seat near the motor. They will have to be changed at some time but their life span is measured in years and thier replacement should not be a big concern.
How To Measure For Your Stair Lift Setup In Millville
Measurement 1: Stand at the top of stairs and extend the tape measure down to the landing, letting it rest on edge of each tread. The tape should not sag or flex along the way. Record the distance from the edge of the upper landing to where the end of the tape measure rests on the landing at the bottom of the stairs.
Measurement 2: Measure from the edge of the upper landing (like Measurement 1) to the edge of the very first stair’s tread at the bottom.
Measurement 3: Determine the width of your stair’s treads.
Measurement: Measure from the edge of the very first stair at the bottom to the wall (or door), if there is one.
Measurement 5 through 7 Measurements 5-7: These are the tread measurements.
Measurement 8: Measure from the top step to the nearby door, wall or other obstruction at the top of the stairs.
The Benefits of Stair Lifts for Senior Citizens In Millville Massachusetts
Outside stair lift Limited movement is a concern for many senior citizens and a concern for their families in Millville. Senior citizens who wish to remain in their houses and stay independent can improve their mobility and stay safe by setting up a stair lift.
A stair lift can transport you or a loved one safely from one floor to another at home. A stair lift can provide a safe ways of transport so that you will no longer have to fret about the threats of falling on the stairs. It is a specifically excellent option for a senior who lives alone.
3 Necessary Utilizes for Heavy-Duty Stair Lifts In Millville
Stair lifts can be found in a series of sizes and capacities. Compact models accommodate and offer mobility for narrow staircases, supporting approximately 350 pounds while doing so, and at the other end, durable stair lifts offer a broader seat and can manage a higher range of body types.
1. You Can Offer Access to Almost Everyone
Because of the bigger, stronger design, the stair lift supplies availability and enhances movement for anyone who’s much heavier than average. Nevertheless, the common stair lift might be too narrow or too short for some, and as the durable design uses a larger, higher seat, it further accommodates anyone who’s taller than average or has problem easily using a basic model.
2. Industrial Applications
While not needed to meet ADA requirements, stair lifts offer an added benefit to those with movement problems.
Within Millville a home, a basic lift might accommodate 2 average-sized adults, however exactly what about when you need to deal with the general public? Your client base, customers, and patients most likely been available in a variety of shapes and sizes, so the sturdy model basically suits everyone who would need to utilize the stairs.
Be aware that, to set up a heavy-duty lift, any staircase needs to provide 36 inches of room.
3. For Multiple Household Members
Exactly what happens, though, when several member of the family need accessibility? Whether you’re fulfilling a current requirement or preparing for a future one, setting up a bigger lift takes everyone’s physical needs into consideration. If your house’s equipped with enough area, take preventative measures by having a heavy-duty lift installed.
Call Us Now 844-561-5857 For A No Obligation Quote