Stair Lift Milford MA

stair lift Milford

How Stair Lifts Work

A stair lift is basically a chair that travels along and rail or track that is installed to a staircase.

There is a motor within the base of the chair that is typically powered by a battery also within the base of the chair. The stair lift motor turns a gear that is meshed into a geared strip on the track or rail. When the gear turns the chair is moved along the geared strip. When the motor turns the gear the chair moves one direction, when the motor’s direction is reversed the chair moves the opposite way.

Call/Send switches are used to move the stair lift chair without anybody being on it. This is especially handy if 2 people use the lift and the lift is at the opposite end of the track when a user wants to use it. the user merely calls the lift to come to them using a call/send switch. Another use of call/send switch is to send out the lift away after use. Some people do not like the appearance of the lift parked in the main living area of the home in Milford and will send it to the opposite end when not in use. They merely call it back when required.

Stair Lift Parts

Although the design and style of stair lifts will vary between makers they all have some basic components typical to them all:

Track or Rail – The stair lift track supports the chair, supplies a system (usually a geared strip) to propel the chair and guides it up and down the staircase just as a train track guides a train.

Track Overruns – Some stair lifts offer the option of an overrun at either the top of the track, bottom of the track or both. The function of a stair lift track overrun is to move the user away from the stairway to securely access or dismount the stair lift in an area where, if they fall, they will not fall on the stairs.

Power supply – While most stair lifts are battery ran today all model will need a power supply to either charge the battery or power the system straight when it comes to non-battery powered units. Non-battery powered stair lifts draw a lot of power and typically need a dedicated circuit.

Call/Send Controls – Call/Send controls are normally installed on the wall near each end of the stair lift track to provide a way for a user to call the chair to them or send it away when not needed. They can be either cordless or wired to the lift depending upon the model.

Seat – The stair lift seat is merely a seat for the user to sit on while using the lift. Depending on the model it might swivel at the top and/or bottom of the track and will usually fold up out of the way when not in use.

Seat Belt – As in an automobile the stair lift safety belt is meant to hold the user securely seated on the seat while the lift is in usage.

Foot Rest – The foot rest of the stair lift is a security feature to prevent the the users feet from hitting the steps while using the lift and a comfort function to support the user’s feet when sitting on the seat. The foot rest will have switches built into them to stop the lift should it strike anything on the stairway and will turn up out of the way when the lift is not in use.

Motor – The motor that drives a stair lift chair along the track is found in the base of the seat.

Transmission – Due to the fact that the motor rotates at expensive a speed to safely propel the stair lift the track at kind of transmission is employed to lower the speed while increasing the power offered.

Battery Charger – Battery powered stair lifts must have a battery charger of some sort to keep the battery charged. The chargers are normally found under the track or near one end of the track. The charger works instantly without any action required by the user.

Battery – The batteries used in stair lifts are fairly expensive and found within the base of the seat near the motor. They will need to be changed at some time but their life span is measured in years and thier replacement must not be a big concern.

How To Measure For Your Stair Lift Installation In Milford

Measurement 1: Stand at the top of stairs and extend the tape measure down to the landing, letting it rest on edge of each tread. The tape must not droop or bend along the way. Record the distance from the edge of the upper landing to where completion of the measuring tape rests on the landing at the bottom of the stairs.

Measurement 2: Measure from the edge of the upper landing (like Measurement 1) to the edge of the very first stair’s tread at the bottom.

Measurement 3: Measure the width of your stair’s treads.

Measurement: Measure from the edge of the first stair at the bottom to the wall (or door), if there is one.

Measurement 5 through 7 Measurements 5-7: These are the tread measurements.

Measurement 8: Measure from the top step to the nearby door, wall or other obstruction at the top of the stairs.

chair lift Milford

The Benefits of Stair Lifts for Seniors In Milford Massachusetts

Outdoor stair lift Limited movement is an issue for many senior citizens and a concern for their families in Milford. Elderly people who want to remain in their houses and remain independent can enhance their mobility and remain safe by installing a stair lift.

A stair lift can transport you or a loved one securely from one floor to another in your home. A stair lift can provide a safe means of transportation so that you will no longer need to stress over the threats of falling on the stairs. It is a particularly good choice for an elderly person who lives alone.

3 Essential Uses for Heavy-Duty Stair Lifts In Milford

Stair lifts been available in a series of sizes and capacities. Compact models accommodate and provide movement for narrow staircases, supporting approximately 350 pounds in the process, and at the other end, heavy-duty stair lifts provide a wider seat and can deal with a higher variety of body types.

1. You Can Supply Access to Nearly Everybody

Because of the bigger, more powerful design, the stair lift offers ease of access and enhances mobility for anybody who’s heavier than average. Nevertheless, the normal stair lift might be too narrow or too short for some, and as the durable design offers a bigger, higher seat, it further accommodates anyone who’s taller than average or has problem conveniently using a standard design.

2. Industrial Applications

While not needed to satisfy ADA requirements, stair lifts provide an added benefit to those with mobility concerns.

Within Milford a house, a standard lift might accommodate two average-sized adults, but exactly what about when you have to deal with the public? Your customer base, clients, and patients likely can be found in a variety of sizes and shapes, so the heavy-duty model basically matches everybody who would need to use the stairs.

Be aware that, to set up a durable lift, any staircase must provide 36 inches of space.

3. For Several Household Members

What happens, however, when multiple member of the family require ease of access? Whether you’re satisfying a current need or anticipating a future one, setting up a bigger lift takes everyone’s physical requirements into consideration. If your house’s geared up with sufficient area, take safety measures by having a heavy-duty lift set up.

Call Us Now 844-561-5857 For A No Obligation Quote