Stair Lift Melrose MA

stair lift Melrose

How Stair Lifts Work

A stair lift is basically a chair that travels along and rail or track that is installed to a staircase.

There is a motor within the base of the chair that is typically powered by a battery also within the base of the chair. The stair lift motor turns a gear that is meshed into a geared strip on the track or rail. When the gear turns the chair is moved along the geared strip. When the motor turns the gear the chair moves one direction, when the motor’s direction is reversed the chair moves the opposite way.

Call/Send switches are used to move the stair lift chair without anybody being on it. This is especially practical if two people utilize the lift and the lift is at the opposite end of the track when a user wishes to use it. the user just calls the lift to come to them using a call/send switch. Another use of call/send switch is to send out the lift away after usage. Some people do not like the look of the lift parked in the main living area of the house in Melrose and will send it to the opposite end when not in use. They simply call it back when needed.

Stair Lift Components

Although the design and style of stair lifts will vary between manufacturers they all have some fundamental parts typical to them all:

Track or Rail – The stair lift track supports the chair, provides a system (generally a geared strip) to propel the chair and guides it up and down the stairway just as a train track guides a train.

Track Overruns – Some stair lifts use the alternative of an overrun at either the top of the track, bottom of the track or both. The purpose of a stair lift track overrun is to move the user far from the stairway to safely access or dismount the stair lift in a place where, if they fall, they will not fall on the stairs.

Power supply – While most stair lifts are battery operated today all model will require a power supply to either charge the battery or power the system straight when it comes to non-battery powered units. Non-battery powered stair lifts draw a great deal of power and normally need a dedicated circuit.

Call/Send Controls – Call/Send controls are typically mounted on the wall near each end of the stair lift track to supply a way for a user to call the chair to them or send it away when not required. They can be either cordless or wired to the lift depending upon the model.

Seat – The stair lift seat is just a seat for the user to rest on while using the lift. Depending upon the model it may swivel at the top and/or bottom of the track and will usually fold out of the way when not in use.

Seat Belt – As in an automobile the stair lift seat belt is meant to hold the user safely seated on the seat while the lift remains in usage.

Foot Rest – The foot rest of the stair lift is a safety feature to prevent the the users feet from hitting the steps while using the lift and a comfort feature to support the user’s feet when sitting on the seat. The foot rest will have switches constructed into them to stop the lift should it strike anything on the stairway and will flip up out of the way when the lift is not in use.

Motor – The motor that drives a stair lift chair along the track is found in the base of the seat.

Transmission – Due to the fact that the motor rotates at too high a speed to securely move the stair lift the track at type of transmission is employed to minimize the speed while increasing the power available.

Battery Battery charger – Battery powered stair lifts need to have a charger of some sort to keep the battery charged. The battery chargers are generally found under the track or near one end of the track. The battery charger works instantly with no action required by the user.

Battery – The batteries utilized in stair lifts are relatively expensive and found within the base of the seat near the motor. They will have to be changed at some time however their life span is determined in years and thier replacement ought to not be a big issue.

How To Measure For Your Stair Lift Installation In Melrose

Measurement 1: Stand at the top of stairs and extend the measuring tape down to the landing, letting it rest on edge of each tread. The tape should not sag or flex along the way. Record the distance from the edge of the upper landing to where the end of the tape measure rests on the landing at the bottom of the stairs.

Measurement 2: Measure from the edge of the upper landing (like Measurement 1) to the edge of the very first stair’s tread at the bottom.

Measurement 3: Determine the width of your stair’s treads.

Measurement: Measure from the edge of the first stair at the bottom to the wall (or door), if there is one.

Measurement 5 through 7 Measurements 5-7: These are the tread measurements.

Measurement 8: Measure from the top step to the nearest door, wall or other obstruction at the top of the stairs.

chair lift Melrose

The Benefits of Stair Lifts for Senior Citizens In Melrose Massachusetts

Outdoor stair lift Limited mobility is a problem for lots of senior citizens and an issue for their families in Melrose. Seniors who want to remain in their homes and stay independent can enhance their mobility and stay safe by installing a stair lift.

A stair lift can carry you or a loved one safely from one floor to another at home. A stair lift can offer a safe ways of transportation so that you will not need to fret about the threats of falling on the stairs. It is an especially excellent option for a senior who lives alone.

3 Important Uses for Heavy-Duty Stair Lifts In Melrose

Stair lifts can be found in a range of sizes and capacities. Compact models accommodate and provide mobility for narrow staircases, supporting approximately 350 pounds in the process, and at the other end, sturdy stair lifts use a larger seat and can handle a greater variety of body types.

1. You Can Supply Access to Nearly Everyone

Because of the bigger, stronger design, the stair lift offers accessibility and improves movement for anybody who’s heavier than average. Nevertheless, the typical stair lift might be too narrow or too short for some, and as the heavy-duty design uses a larger, higher seat, it further accommodates anyone who’s taller than average or has problem comfortably using a standard model.

2. Business Applications

While not needed to meet ADA requirements, stair lifts offer an added convenience to those with mobility problems.

Within Melrose a house, a basic lift might accommodate two average-sized adults, but what about when you need to deal with the general public? Your client base, clients, and patients likely come in a variety of sizes and shapes, so the heavy-duty model essentially fits everybody who would need to utilize the stairs.

Understand that, to install a sturdy lift, any staircase must offer 36 inches of space.

3. For Numerous Family Members

Exactly what takes place, however, when multiple member of the family require ease of access? Whether you’re satisfying an existing requirement or expecting a future one, installing a bigger lift takes everyone’s physical requirements into consideration. If your house’s equipped with adequate space, take preventative measures by having a heavy-duty lift set up.

Call Us Now 844-561-5857 For A No Obligation Quote