Stair Lift Lander WY

stair lift Lander

How Stair Lifts Work

A stair lift is basically a chair that travels along and rail or track that is installed to a staircase.

There is a motor within the base of the chair that is normally powered by a battery also within the base of the chair. The stair lift motor turns a gear that is meshed into a geared strip on the track or rail. When the gear turns the chair is moved along the geared strip. When the motor turns the gear the chair moves one direction, when the motor’s direction is reversed the chair moves the opposite way.

Call/Send switches are used to move the stair lift chair without anybody being on it. This is particularly handy if two people utilize the lift and the lift is at the opposite end of the track when a user wishes to utilize it. the user merely calls the lift to come to them using a call/send switch. Another use of call/send switch is to send the lift away after use. Some individuals don’t like the look of the lift parked in the main living area of the home in Lander and will send it to the opposite end when not in use. They just call it back when required.

Stair Lift Parts

Although the design and style of stair lifts will vary between manufacturers they all have some standard elements typical to them all:

Track or Rail – The stair lift track supports the chair, supplies a system (usually a geared strip) to propel the chair and guides it up and down the stairway just as a train track guides a train.

Track Overruns – Some stair lifts use the option of an overrun at either the top of the track, bottom of the track or both. The purpose of a stair lift track overrun is to move the user far from the staircase to securely access or dismount the stair lift in a location where, if they fall, they will not fall on the stairs.

Power supply – While many stair lifts are battery ran today all model will need a power supply to either charge the battery or power the unit directly in the case of non-battery powered systems. Non-battery powered stair lifts draw a lot of power and usually need a devoted circuit.

Call/Send Controls – Call/Send controls are typically installed on the wall near each end of the stair lift track to provide a way for a user to call the chair to them or send it away when not required. They can be either cordless or wired to the lift depending on the model.

Seat – The stair lift seat is simply a seat for the user to sit on while using the lift. Depending on the model it might swivel at the top and/or bottom of the track and will usually fold up out of the way when not in use.

Seat Belt – As in an automobile the stair lift safety belt is planned to hold the user safely seated on the seat while the lift remains in usage.

Foot Rest – The foot remainder of the stair lift is a safety function to prevent the the users feet from hitting the steps while using the lift and a comfort function to support the user’s feet when sitting on the seat. The foot rest will have switches built into them to stop the lift should it hit anything on the staircase and will flip up out of the way when the lift is not in use.

Motor – The motor that drives a stair lift chair along the track is found in the base of the seat.

Transmission – Since the motor turns at too expensive a speed to safely move the stair lift the track at type of transmission is used to lower the speed while increasing the power readily available.

Battery Battery charger – Battery powered stair lifts need to have a battery charger of some sort to keep the battery charged. The chargers are normally found under the track or near one end of the track. The battery charger works immediately without any action needed by the user.

Battery – The batteries used in stair lifts are relatively expensive and found within the base of the seat near the motor. They will have to be changed at some time however their life span is determined in years and thier replacement should not be a huge issue.

The Best Ways To Measure For Your Stair Lift Setup In Lander

Measurement 1: Stand at the top of stairs and extend the measuring tape down to the landing, letting it rest on edge of each tread. The tape needs to not sag or flex along the way. Record the distance from the edge of the upper landing to where completion of the measuring tape rests on the landing at the bottom of the stairs.

Measurement 2: Measure from the edge of the upper landing (like Measurement 1) to the edge of the very first stair’s tread at the bottom.

Measurement 3: Measure the width of your stair’s treads.

Measurement: Measure from the edge of the very first stair at the bottom to the wall (or door), if there is one.

Measurement 5 through 7 Measurements 5-7: These are the tread measurements.

Measurement 8: Measure from the top step to the nearby door, wall or other obstruction at the top of the stairs.

chair lift Lander

The Benefits of Stair Lifts for Seniors In Lander Wyoming

Outdoor stair lift Limited mobility is a problem for lots of seniors and a concern for their families in Lander. Seniors who wish to stay in their houses and remain independent can enhance their movement and stay safe by setting up a stair lift.

A stair lift can transfer you or a loved one safely from one floor to another in the house. A stair lift can supply a safe ways of transportation so that you will not need to worry about the dangers of falling on the stairs. It is a particularly great option for a senior who lives alone.

3 Essential Uses for Heavy-Duty Stair Lifts In Lander

Stair lifts come in a series of sizes and capacities. Compact models accommodate and provide movement for narrow staircases, supporting up to 350 pounds at the same time, and at the other end, heavy-duty stair lifts provide a broader seat and can manage a greater variety of body types.

1. You Can Offer Access to Almost Everybody

Because of the larger, more powerful design, the stair lift offers ease of access and improves movement for anyone who’s heavier than average. However, the normal stair lift might be too narrow or too short for some, and as the durable design offers a bigger, greater seat, it even more accommodates anyone who’s taller than average or has trouble conveniently utilizing a basic design.

2. Business Applications

While not needed to meet ADA standards, stair lifts offer an added benefit to those with movement problems.

Within Lander a house, a basic lift might accommodate 2 average-sized adults, but exactly what about when you have to deal with the public? Your client base, customers, and patients most likely can be found in a variety of sizes and shapes, so the heavy-duty model basically suits everyone who would need to use the stairs.

Know that, to set up a heavy-duty lift, any staircase must provide 36 inches of room.

3. For Numerous Family Members

Exactly what happens, though, when numerous member of the family require availability? Whether you’re fulfilling a present need or expecting a future one, installing a larger lift takes everyone’s physical needs into consideration. If your house’s geared up with enough area, take precautions by having a heavy-duty lift set up.

Call Us Now 844-561-5857 For A No Obligation Quote