Stair Lift Kemmerer WY
How Stair Lifts Work
A stair lift is essentially a chair that travels along and rail or track that is installed to a stairway.
There is a motor within the base of the chair that is generally powered by a battery also within the base of the chair. The stair lift motor turns a gear that is meshed into a geared strip on the track or rail. When the gear turns the chair is moved along the geared strip. When the motor turns the gear the chair moves one direction, when the motor’s direction is reversed the chair moves the opposite way.
Call/Send switches are utilized to move the stair lift chair without anybody being on it. This is especially handy if two individuals use the lift and the lift is at the opposite end of the track when a user wishes to use it. the user merely calls the lift to come to them utilizing a call/send switch. Another use of call/send switch is to send out the lift away after use. Some individuals do not like the look of the lift parked in the main living area of the home in Kemmerer and will send it to the opposite end when not in use. They just call it back when needed.
Stair Lift Parts
Although the design and style of stair lifts will vary between manufacturers they all have some standard parts typical to them all:
Track or Rail – The stair lift track supports the chair, provides a system (usually a geared strip) to move the chair and guides it up and down the staircase just as a train track guides a train.
Track Overruns – Some stair lifts use the alternative of an overrun at either the top of the track, bottom of the track or both. The purpose of a stair lift track overrun is to move the user away from the stairs to safely access or dismount the stair lift in a place where, if they fall, they won’t fall on the stairs.
Power supply – While the majority of stair lifts are battery operated today all model will require a power supply to either charge the battery or power the unit directly in the case of non-battery powered units. Non-battery powered stair lifts draw a great deal of power and usually need a devoted circuit.
Call/Send Controls – Call/Send controls are generally installed on the wall near each end of the stair lift track to provide a way for a user to call the chair to them or send it away when not required. They can be either wireless or wired to the lift depending upon the design.
Seat – The stair lift seat is simply a seat for the user to sit on while using the lift. Depending upon the model it may rotate at the top and/or bottom of the track and will typically fold up out of the way when not in use.
Seat Belt – As in a car the stair lift seat belt is meant to hold the user securely seated on the seat while the lift remains in usage.
Foot Rest – The foot remainder of the stair lift is a security function to prevent the the users feet from hitting the steps while using the lift and a comfort function to support the user’s feet when sitting on the seat. The foot rest will have switches built into them to stop the lift needs to it hit anything on the staircase and will turn up out of the way when the lift is not in use.
Motor – The motor that drives a stair lift chair along the track is found in the base of the seat.
Transmission – Due to the fact that the motor turns at too expensive a speed to securely move the stair lift the track at type of transmission is utilized to decrease the speed while increasing the power readily available.
Battery Battery charger – Battery powered stair lifts must have a charger of some sort to keep the battery charged. The battery chargers are typically found under the track or near one end of the track. The battery charger works immediately without any action needed by the user.
Battery – The batteries used in stair lifts are relatively costly and found within the base of the seat near the motor. They will need to be replaced at some time however their life expectancy is determined in years and thier replacement must not be a huge concern.
The Best Ways To Measure For Your Stair Lift Setup In Kemmerer
Measurement 1: Stand at the top of stairs and extend the measuring tape down to the landing, letting it rest on edge of each tread. The tape ought to not droop or bend along the way. Record the distance from the edge of the upper landing to where the end of the measuring tape rests on the landing at the bottom of the stairs.
Measurement 2: Measure from the edge of the upper landing (like Measurement 1) to the edge of the first stair’s tread at the bottom.
Measurement 3: Determine the width of your stair’s treads.
Measurement: Measure from the edge of the first stair at the bottom to the wall (or door), if there is one.
Measurement 5 through 7 Measurements 5-7: These are the tread measurements.
Measurement 8: Measure from the top step to the nearby door, wall or other obstruction at the top of the stairs.
The Benefits of Stair Lifts for Seniors In Kemmerer Wyoming
Outside stair lift Limited mobility is a problem for lots of seniors and a concern for their families in Kemmerer. Seniors who want to stay in their homes and remain independent can enhance their movement and remain safe by installing a stair lift.
A stair lift can transfer you or a loved one safely from one floor to another in your home. A stair lift can provide a safe means of transport so that you will no longer have to fret about the dangers of falling on the stairs. It is a particularly great option for a senior who lives alone.
3 Essential Uses for Heavy-Duty Stair Lifts In Kemmerer
Stair lifts come in a variety of sizes and capacities. Compact models accommodate and supply movement for narrow staircases, supporting up to 350 pounds in the process, and at the other end, sturdy stair lifts offer a wider seat and can deal with a greater range of body types.
1. You Can Offer Access to Nearly Everybody
Because of the bigger, more powerful design, the stair lift supplies ease of access and improves movement for anyone who’s heavier than average. However, the normal stair lift might be too narrow or too short for some, and as the durable design provides a bigger, greater seat, it further accommodates anyone who’s taller than average or has problem comfortably using a standard model.
2. Commercial Applications
While not had to meet ADA standards, stair lifts provide an added benefit to those with mobility issues.
Within Kemmerer a house, a standard lift might accommodate two average-sized adults, however what about when you need to deal with the general public? Your customer base, customers, and patients likely come in a range of shapes and sizes, so the heavy-duty model basically fits everybody who would have to utilize the stairs.
Know that, to install a heavy-duty lift, any staircase should provide 36 inches of space.
3. For Several Household Members
What happens, however, when several member of the family need availability? Whether you’re satisfying a present requirement or anticipating a future one, setting up a bigger lift takes everybody’s physical needs into consideration. If your house’s equipped with enough space, take safety measures by having a durable lift set up.
Call Us Now 844-561-5857 For A No Obligation Quote