Stair Lift Institute WV

stair lift Institute

How Stair Lifts Work

A stair lift is essentially a chair that travels along and rail or track that is installed to a stairway.

There is a motor within the base of the chair that is normally powered by a battery also within the base of the chair. The stair lift motor turns a gear that is meshed into a geared strip on the track or rail. When the gear turns the chair is moved along the geared strip. When the motor turns the gear the chair moves one direction, when the motor’s direction is reversed the chair moves the opposite way.

Call/Send switches are used to move the stair lift chair without anybody being on it. This is particularly handy if two people use the lift and the lift is at the opposite end of the track when a user wants to utilize it. the user simply calls the lift to come to them utilizing a call/send switch. Another use of call/send switch is to send out the lift away after usage. Some people do not like the appearance of the lift parked in the main living area of the house in Institute and will send it to the opposite end when not in use. They merely call it back when required.

Stair Lift Parts

Although the design and style of stair lifts will vary between manufacturers they all have some fundamental parts common to them all:

Track or Rail – The stair lift track supports the chair, provides a system (generally a geared strip) to propel the chair and guides it up and down the stairway just as a train track guides a train.

Track Overruns – Some stair lifts provide the choice of an overrun at either the top of the track, bottom of the track or both. The purpose of a stair lift track overrun is to move the user far from the stairs to safely access or dismount the stair lift in a location where, if they fall, they won’t fall on the stairs.

Power supply – While the majority of stair lifts are battery operated today all model will require a power supply to either charge the battery or power the system straight in the case of non-battery powered units. Non-battery powered stair lifts draw a lot of power and usually need a dedicated circuit.

Call/Send Controls – Call/Send controls are normally installed on the wall near each end of the stair lift track to supply a way for a user to call the chair to them or send it away when not needed. They can be either wireless or wired to the lift depending on the model.

Seat – The stair lift seat is merely a seat for the user to sit on while using the lift. Depending upon the model it might swivel at the top and/or bottom of the track and will typically fold up out of the way when not in use.

Seat Belt – As in a car the stair lift safety belt is planned to hold the user securely seated on the seat while the lift remains in use.

Foot Rest – The foot remainder of the stair lift is a safety function to prevent the the users feet from striking the steps while utilizing the lift and a comfort function to support the user’s feet when resting on the seat. The foot rest will have switches developed into them to stop the lift must it hit anything on the stairs and will turn up out of the way when the lift is not in use.

Motor – The motor that drives a stair lift chair along the track is found in the base of the seat.

Transmission – Because the motor turns at too high a speed to securely propel the stair lift the track at type of transmission is used to reduce the speed while increasing the power readily available.

Battery Battery charger – Battery powered stair lifts should have a charger of some sort to keep the battery charged. The chargers are usually found under the track or near one end of the track. The charger works immediately without any action needed by the user.

Battery – The batteries used in stair lifts are relatively expensive and found within the base of the seat near the motor. They will have to be replaced at some time but their life span is determined in years and thier replacement ought to not be a big issue.

How To Measure For Your Stair Lift Installation In Institute

Measurement 1: Stand at the top of stairs and extend the measuring tape down to the landing, letting it rest on edge of each tread. The tape ought to not sag or bend along the way. Record the distance from the edge of the upper landing to where the end of the tape measure rests on the landing at the bottom of the stairs.

Measurement 2: Measure from the edge of the upper landing (like Measurement 1) to the edge of the very first stair’s tread at the bottom.

Measurement 3: Determine the width of your stair’s treads.

Measurement: Measure from the edge of the first stair at the bottom to the wall (or door), if there is one.

Measurement 5 through 7 Measurements 5-7: These are the tread measurements.

Measurement 8: Measure from the top step to the nearest door, wall or other obstruction at the top of the stairs.

chair lift Institute

The Benefits of Stair Lifts for Seniors In Institute West Virginia

Outdoor stair lift Limited mobility is a problem for lots of seniors and an issue for their families in Institute. Senior citizens who wish to stay in their homes and remain independent can improve their movement and stay safe by installing a stair lift.

A stair lift can transfer you or a loved one safely from one floor to another in your home. A stair lift can supply a safe means of transport so that you will no longer have to stress over the threats of falling on the stairs. It is a particularly excellent choice for a senior citizen who lives alone.

3 Essential Uses for Heavy-Duty Stair Lifts In Institute

Stair lifts come in a variety of sizes and capacities. Compact models accommodate and supply mobility for narrow staircases, supporting approximately 350 pounds while doing so, and at the other end, durable stair lifts use a broader seat and can handle a greater variety of body types.

1. You Can Provide Access to Nearly Everybody

Because of the bigger, stronger design, the stair lift provides accessibility and improves movement for anyone who’s heavier than average. Nevertheless, the normal stair lift might be too narrow or too short for some, and as the heavy-duty design offers a larger, higher seat, it even more accommodates anybody who’s taller than average or has problem easily using a standard design.

2. Business Applications

While not had to meet ADA requirements, stair lifts provide an added convenience to those with movement problems.

Within Institute a house, a standard lift might accommodate 2 average-sized adults, but exactly what about when you have to deal with the public? Your customer base, clients, and patients most likely can be found in a range of sizes and shapes, so the heavy-duty model basically suits everybody who would need to use the stairs.

Be aware that, to set up a heavy-duty lift, any staircase needs to provide 36 inches of space.

3. For Several Household Members

What takes place, though, when numerous member of the family require accessibility? Whether you’re fulfilling a present need or anticipating a future one, setting up a bigger lift takes everyone’s physical requirements into consideration. If your house’s equipped with sufficient area, take precautions by having a durable lift set up.

Call Us Now 844-561-5857 For A No Obligation Quote