Stair Lift Gilbert AZ

stair lift Gilbert

How Stair Lifts Work

A stair lift is generally a chair that travels along and rail or track that is installed to a stairs.

There is a motor within the base of the chair that is generally powered by a battery also within the base of the chair. The stair lift motor turns a gear that is meshed into a geared strip on the track or rail. When the gear turns the chair is moved along the geared strip. When the motor turns the gear the chair moves one direction, when the motor’s direction is reversed the chair moves the opposite way.

Call/Send switches are utilized to move the stair lift chair without anyone being on it. This is particularly handy if two people use the lift and the lift is at the opposite end of the track when a user wishes to utilize it. the user just calls the lift to come to them utilizing a call/send switch. Another use of call/send switch is to send out the lift away after usage. Some individuals do not like the look of the lift parked in the main living area of the house in Gilbert and will send it to the opposite end when not in use. They merely call it back when required.

Stair Lift Components

Although the design and style of stair lifts will vary between makers they all have some basic elements typical to them all:

Track or Rail – The stair lift track supports the chair, supplies a mechanism (usually a geared strip) to propel the chair and guides it up and down the stairway just as a train track guides a train.

Track Overruns – Some stair lifts provide the option of an overrun at either the top of the track, bottom of the track or both. The purpose of a stair lift track overrun is to move the user away from the stairway to securely access or dismount the stair lift in an area where, if they fall, they will not fall on the stairs.

Power supply – While most stair lifts are battery operated today all model will require a power supply to either charge the battery or power the system directly in the case of non-battery powered units. Non-battery powered stair lifts draw a great deal of power and generally need a dedicated circuit.

Call/Send Controls – Call/Send controls are normally installed on the wall near each end of the stair lift track to offer a method for a user to call the chair to them or send it away when not needed. They can be either cordless or wired to the lift depending upon the design.

Seat – The stair lift seat is simply a seat for the user to sit on while utilizing the lift. Depending upon the model it might swivel at the top and/or bottom of the track and will generally fold up out of the way when not in use.

Seat Belt – As in a vehicle the stair lift safety belt is intended to hold the user safely seated on the seat while the lift is in use.

Foot Rest – The foot rest of the stair lift is a safety function to prevent the the users feet from hitting the steps while using the lift and a comfort feature to support the user’s feet when sitting on the seat. The foot rest will have switches developed into them to stop the lift must it hit anything on the stairway and will flip up out of the way when the lift is not in use.

Motor – The motor that drives a stair lift chair along the track is found in the base of the seat.

Transmission – Since the motor turns at too expensive a speed to securely move the stair lift the track at kind of transmission is utilized to reduce the speed while increasing the power offered.

Battery Battery charger – Battery powered stair lifts need to have a battery charger of some sort to keep the battery charged. The battery chargers are usually found under the track or near one end of the track. The battery charger works instantly without any action needed by the user.

Battery – The batteries used in stair lifts are fairly costly and found within the base of the seat near the motor. They will need to be changed at some time but their life expectancy is measured in years and thier replacement should not be a huge concern.

Ways To Measure For Your Stair Lift Setup In Gilbert

Measurement 1: Stand at the top of stairs and extend the tape measure down to the landing, letting it rest on edge of each tread. The tape must not sag or flex along the way. Record the distance from the edge of the upper landing to where the end of the measuring tape rests on the landing at the bottom of the stairs.

Measurement 2: Measure from the edge of the upper landing (like Measurement 1) to the edge of the very first stair’s tread at the bottom.

Measurement 3: Determine the width of your stair’s treads.

Measurement: Measure from the edge of the very first stair at the bottom to the wall (or door), if there is one.

Measurement 5 through 7 Measurements 5-7: These are the tread measurements.

Measurement 8: Measure from the top step to the nearest door, wall or other obstruction at the top of the stairs.

chair lift Gilbert

The Advantages of Stair Lifts for Senior Citizens In Gilbert Arizona

Outdoor stair lift Limited mobility is a problem for many seniors and a concern for their families in Gilbert. Elderly people who want to stay in their homes and stay independent can improve their movement and stay safe by installing a stair lift.

A stair lift can transfer you or a loved one securely from one floor to another at home. A stair lift can offer a safe means of transportation so that you will not have to fret about the risks of falling on the stairs. It is an especially great choice for a senior citizen who lives alone.

3 Important Utilizes for Heavy-Duty Stair Lifts In Gilbert

Stair lifts can be found in a variety of sizes and capacities. Compact models accommodate and supply movement for narrow staircases, supporting approximately 350 pounds in the process, and at the other end, durable stair lifts offer a broader seat and can deal with a higher series of body types.

1. You Can Supply Access to Nearly Everyone

Because of the larger, more powerful design, the stair lift provides availability and improves mobility for anyone who’s heavier than average. Nevertheless, the normal stair lift might be too narrow or too short for some, and as the heavy-duty design provides a bigger, higher seat, it further accommodates anybody who’s taller than average or has difficulty easily using a basic model.

2. Commercial Applications

While not needed to meet ADA requirements, stair lifts provide an added benefit to those with mobility issues.

Within Gilbert a house, a standard lift might accommodate 2 average-sized adults, however what about when you need to handle the public? Your customer base, customers, and patients likely come in a range of sizes and shapes, so the durable model essentially fits everyone who would have to utilize the stairs.

Know that, to set up a durable lift, any staircase needs to provide 36 inches of space.

3. For Several Household Members

Exactly what takes place, however, when several member of the family require availability? Whether you’re fulfilling a present requirement or expecting a future one, setting up a larger lift takes everyone’s physical requirements into consideration. If your house’s geared up with adequate area, take precautions by having a durable lift set up.

Call Us Now 844-561-5857 For A No Obligation Quote