Stair Lift Franklin MA
How Stair Lifts Work
A stair lift is basically a chair that travels along and rail or track that is installed to a stairs.
There is a motor within the base of the chair that is normally powered by a battery also within the base of the chair. The stair lift motor turns a gear that is meshed into a geared strip on the track or rail. When the gear turns the chair is moved along the geared strip. When the motor turns the gear the chair moves one direction, when the motor’s direction is reversed the chair moves the opposite way.
Call/Send switches are used to move the stair lift chair without anybody being on it. This is particularly practical if 2 individuals use the lift and the lift is at the opposite end of the track when a user wants to utilize it. the user merely calls the lift to come to them utilizing a call/send switch. Another use of call/send switch is to send the lift away after use. Some people do not like the look of the lift parked in the main living area of the house in Franklin and will send it to the opposite end when not in use. They just call it back when required.
Stair Lift Components
Although the design and style of stair lifts will vary between producers they all have some fundamental components common to them all:
Track or Rail – The stair lift track supports the chair, provides a system (typically a geared strip) to move the chair and guides it up and down the stairway just as a train track guides a train.
Track Overruns – Some stair lifts provide the choice of an overrun at either the top of the track, bottom of the track or both. The purpose of a stair lift track overrun is to move the user far from the stairway to securely access or dismount the stair lift in a place where, if they fall, they will not fall on the stairs.
Power supply – While most stair lifts are battery operated today all model will require a power supply to either charge the battery or power the unit directly in the case of non-battery powered units. Non-battery powered stair lifts draw a lot of power and usually need a dedicated circuit.
Call/Send Controls – Call/Send controls are typically mounted on the wall near each end of the stair lift track to offer a way for a user to call the chair to them or send it away when not needed. They can be either cordless or wired to the lift depending on the design.
Seat – The stair lift seat is just a seat for the user to rest on while using the lift. Depending upon the model it may rotate at the top and/or bottom of the track and will usually fold up out of the way when not in use.
Seat Belt – As in a car the stair lift seat belt is meant to hold the user securely seated on the seat while the lift is in use.
Foot Rest – The foot rest of the stair lift is a security feature to prevent the the users feet from hitting the steps while utilizing the lift and a comfort feature to support the user’s feet when resting on the seat. The foot rest will have switches constructed into them to stop the lift must it strike anything on the staircase and will turn up out of the way when the lift is not in use.
Motor – The motor that drives a stair lift chair along the track is found in the base of the seat.
Transmission – Due to the fact that the motor rotates at too expensive a speed to safely propel the stair lift the track at type of transmission is employed to reduce the speed while increasing the power readily available.
Battery Charger – Battery powered stair lifts need to have a battery charger of some sort to keep the battery charged. The battery chargers are typically found under the track or near one end of the track. The charger works automatically without any action needed by the user.
Battery – The batteries used in stair lifts are fairly costly and found within the base of the seat near the motor. They will have to be replaced at some time however their life expectancy is determined in years and thier replacement must not be a huge concern.
How To Measure For Your Stair Lift Installation In Franklin
Measurement 1: Stand at the top of stairs and extend the tape measure down to the landing, letting it rest on edge of each tread. The tape needs to not sag or flex along the way. Record the distance from the edge of the upper landing to where the end of the tape measure rests on the landing at the bottom of the stairs.
Measurement 2: Measure from the edge of the upper landing (like Measurement 1) to the edge of the very first stair’s tread at the bottom.
Measurement 3: Determine the width of your stair’s treads.
Measurement: Measure from the edge of the very first stair at the bottom to the wall (or door), if there is one.
Measurement 5 through 7 Measurements 5-7: These are the tread measurements.
Measurement 8: Measure from the top step to the nearest door, wall or other obstruction at the top of the stairs.
The Advantages of Stair Lifts for Seniors In Franklin Massachusetts
Outside stair lift Limited mobility is a problem for lots of seniors and an issue for their families in Franklin. Elderly people who want to stay in their homes and remain independent can improve their movement and stay safe by installing a stair lift.
A stair lift can carry you or a loved one securely from one floor to another in your home. A stair lift can offer a safe means of transport so that you will not have to stress over the dangers of falling on the stairs. It is a particularly excellent alternative for a senior who lives alone.
3 Necessary Utilizes for Heavy-Duty Stair Lifts In Franklin
Stair lifts come in a series of sizes and capacities. Compact models accommodate and supply movement for narrow staircases, supporting up to 350 pounds in the process, and at the other end, sturdy stair lifts provide a broader seat and can deal with a greater series of body types.
1. You Can Offer Access to Nearly Everyone
Because of the larger, stronger design, the stair lift supplies ease of access and enhances mobility for anyone who’s much heavier than average. Nevertheless, the common stair lift might be too narrow or too short for some, and as the heavy-duty design uses a larger, greater seat, it further accommodates anybody who’s taller than average or has difficulty comfortably using a standard model.
2. Commercial Applications
While not needed to satisfy ADA standards, stair lifts provide an added benefit to those with mobility concerns.
Within Franklin a home, a basic lift might accommodate 2 average-sized adults, however exactly what about when you have to handle the public? Your client base, clients, and patients likely can be found in a range of sizes and shapes, so the durable model essentially suits everyone who would have to utilize the stairs.
Know that, to install a sturdy lift, any staircase should supply 36 inches of space.
3. For Several Family Members
Exactly what takes place, however, when multiple family members require ease of access? Whether you’re meeting an existing requirement or expecting a future one, installing a larger lift takes everybody’s physical needs into consideration. If your house’s geared up with adequate area, take precautions by having a durable lift installed.
Call Us Now 844-561-5857 For A No Obligation Quote