Stair Lift Fountain Hills AZ

stair lift Fountain Hills

How Stair Lifts Work

A stair lift is essentially a chair that travels along and rail or track that is installed to a stairs.

There is a motor within the base of the chair that is usually powered by a battery also within the base of the chair. The stair lift motor turns a gear that is meshed into a geared strip on the track or rail. When the gear turns the chair is moved along the geared strip. When the motor turns the gear the chair moves one direction, when the motor’s direction is reversed the chair moves the opposite way.

Call/Send switches are utilized to move the stair lift chair without anyone being on it. This is especially handy if two individuals utilize the lift and the lift is at the opposite end of the track when a user wants to use it. the user simply calls the lift to come to them using a call/send switch. Another use of call/send switch is to send out the lift away after usage. Some individuals don’t like the appearance of the lift parked in the main living area of the home in Fountain Hills and will send it to the opposite end when not in use. They merely call it back when required.

Stair Lift Components

Although the design and style of stair lifts will vary between makers they all have some standard parts common to them all:

Track or Rail – The stair lift track supports the chair, provides a system (normally a geared strip) to move the chair and guides it up and down the staircase just as a train track guides a train.

Track Overruns – Some stair lifts use the choice of an overrun at either the top of the track, bottom of the track or both. The purpose of a stair lift track overrun is to move the user far from the stairs to securely access or dismount the stair lift in a location where, if they fall, they won’t fall on the stairs.

Power supply – While the majority of stair lifts are battery ran today all model will need a power supply to either charge the battery or power the unit directly in the case of non-battery powered systems. Non-battery powered stair lifts draw a lot of power and generally require a dedicated circuit.

Call/Send Controls – Call/Send controls are usually mounted on the wall near each end of the stair lift track to provide a method for a user to call the chair to them or send it away when not needed. They can be either cordless or wired to the lift depending on the model.

Seat – The stair lift seat is just a seat for the user to rest on while utilizing the lift. Depending on the model it may swivel at the top and/or bottom of the track and will usually fold up out of the way when not in use.

Seat Belt – As in an automobile the stair lift seat belt is planned to hold the user safely seated on the seat while the lift remains in usage.

Foot Rest – The foot rest of the stair lift is a security feature to prevent the the users feet from hitting the steps while utilizing the lift and a comfort feature to support the user’s feet when sitting on the seat. The foot rest will have switches built into them to stop the lift must it hit anything on the stairway and will turn up out of the way when the lift is not in use.

Motor – The motor that drives a stair lift chair along the track is found in the base of the seat.

Transmission – Since the motor rotates at too high a speed to safely propel the stair lift the track at kind of transmission is used to minimize the speed while increasing the power available.

Battery Charger – Battery powered stair lifts should have a battery charger of some sort to keep the battery charged. The battery chargers are typically found under the track or near one end of the track. The charger works immediately without any action needed by the user.

Battery – The batteries utilized in stair lifts are fairly pricey and found within the base of the seat near the motor. They will need to be replaced at some time however their life span is measured in years and thier replacement need to not be a huge concern.

The Best Ways To Measure For Your Stair Lift Installation In Fountain Hills

Measurement 1: Stand at the top of stairs and extend the measuring tape down to the landing, letting it rest on edge of each tread. The tape needs to not droop or bend along the way. Record the distance from the edge of the upper landing to where completion of the tape measure rests on the landing at the bottom of the stairs.

Measurement 2: Measure from the edge of the upper landing (like Measurement 1) to the edge of the first stair’s tread at the bottom.

Measurement 3: Determine the width of your stair’s treads.

Measurement: Measure from the edge of the first stair at the bottom to the wall (or door), if there is one.

Measurement 5 through 7 Measurements 5-7: These are the tread measurements.

Measurement 8: Measure from the top step to the nearest door, wall or other obstruction at the top of the stairs.

chair lift Fountain Hills

The Benefits of Stair Lifts for Seniors In Fountain Hills Arizona

Outside stair lift Limited mobility is a problem for lots of seniors and a concern for their families in Fountain Hills. Senior citizens who want to remain in their homes and remain independent can improve their movement and stay safe by installing a stair lift.

A stair lift can transport you or a loved one safely from one floor to another in the house. A stair lift can provide a safe ways of transport so that you will no longer need to stress over the risks of falling on the stairs. It is a particularly excellent option for an elderly person who lives alone.

3 Necessary Utilizes for Heavy-Duty Stair Lifts In Fountain Hills

Stair lifts been available in a series of sizes and capacities. Compact models accommodate and offer movement for narrow staircases, supporting approximately 350 pounds in the process, and at the other end, durable stair lifts offer a larger seat and can manage a greater range of body types.

1. You Can Supply Access to Nearly Everybody

Because of the bigger, stronger design, the stair lift provides accessibility and enhances movement for anybody who’s heavier than average. However, the typical stair lift might be too narrow or too short for some, and as the durable design offers a bigger, higher seat, it further accommodates anyone who’s taller than average or has problem comfortably using a basic model.

2. Commercial Applications

While not had to fulfill ADA standards, stair lifts offer an added convenience to those with mobility issues.

Within Fountain Hills a house, a standard lift might accommodate two average-sized adults, however exactly what about when you need to handle the general public? Your client base, clients, and patients likely can be found in a series of sizes and shapes, so the sturdy model essentially fits everybody who would have to use the stairs.

Understand that, to set up a sturdy lift, any staircase should provide 36 inches of space.

3. For Multiple Family Members

What occurs, though, when multiple family members require accessibility? Whether you’re satisfying a current need or preparing for a future one, installing a bigger lift takes everybody’s physical needs into consideration. If your house’s geared up with adequate space, take precautions by having a durable lift set up.

Call Us Now 844-561-5857 For A No Obligation Quote