Stair Lift Dalton MA
How Stair Lifts Work
A stair lift is essentially a chair that travels along and rail or track that is mounted to a staircase.
There is a motor within the base of the chair that is typically powered by a battery also within the base of the chair. The stair lift motor turns a gear that is meshed into a geared strip on the track or rail. When the gear turns the chair is moved along the geared strip. When the motor turns the gear the chair moves one direction, when the motor’s direction is reversed the chair moves the opposite way.
Call/Send switches are used to move the stair lift chair without anyone being on it. This is particularly handy if 2 individuals utilize the lift and the lift is at the opposite end of the track when a user wishes to use it. the user simply calls the lift to come to them using a call/send switch. Another use of call/send switch is to send the lift away after usage. Some individuals do not like the look of the lift parked in the main living area of the home in Dalton and will send it to the opposite end when not in use. They simply call it back when required.
Stair Lift Components
Although the design and style of stair lifts will vary between makers they all have some fundamental components typical to them all:
Track or Rail – The stair lift track supports the chair, supplies a mechanism (usually a geared strip) to propel the chair and guides it up and down the stairs just as a train track guides a train.
Track Overruns – Some stair lifts offer the choice of an overrun at either the top of the track, bottom of the track or both. The purpose of a stair lift track overrun is to move the user far from the stairs to safely access or dismount the stair lift in a place where, if they fall, they won’t fall on the stairs.
Power supply – While most stair lifts are battery operated today all model will need a power supply to either charge the battery or power the unit directly in the case of non-battery powered systems. Non-battery powered stair lifts draw a great deal of power and normally require a devoted circuit.
Call/Send Controls – Call/Send controls are normally mounted on the wall near each end of the stair lift track to offer a way for a user to call the chair to them or send it away when not needed. They can be either cordless or wired to the lift depending upon the design.
Seat – The stair lift seat is simply a seat for the user to rest on while using the lift. Depending upon the model it may rotate at the top and/or bottom of the track and will typically fold up out of the way when not in use.
Seat Belt – As in a car the stair lift seat belt is meant to hold the user securely seated on the seat while the lift remains in usage.
Foot Rest – The foot rest of the stair lift is a safety function to prevent the the users feet from hitting the steps while utilizing the lift and a comfort feature to support the user’s feet when sitting on the seat. The foot rest will have switches built into them to stop the lift needs to it hit anything on the staircase and will turn up out of the way when the lift is not in use.
Motor – The motor that drives a stair lift chair along the track is found in the base of the seat.
Transmission – Due to the fact that the motor turns at too expensive a speed to safely move the stair lift the track at kind of transmission is employed to decrease the speed while increasing the power available.
Battery Battery charger – Battery powered stair lifts must have a battery charger of some sort to keep the battery charged. The battery chargers are typically found under the track or near one end of the track. The battery charger works automatically without any action required by the user.
Battery – The batteries used in stair lifts are fairly pricey and found within the base of the seat near the motor. They will have to be changed at some time however their life expectancy is measured in years and thier replacement need to not be a big issue.
Ways To Measure For Your Stair Lift Installation In Dalton
Measurement 1: Stand at the top of stairs and extend the tape measure down to the landing, letting it rest on edge of each tread. The tape should not sag or flex along the way. Record the distance from the edge of the upper landing to where the end of the tape measure rests on the landing at the bottom of the stairs.
Measurement 2: Measure from the edge of the upper landing (like Measurement 1) to the edge of the very first stair’s tread at the bottom.
Measurement 3: Determine the width of your stair’s treads.
Measurement: Measure from the edge of the very first stair at the bottom to the wall (or door), if there is one.
Measurement 5 through 7 Measurements 5-7: These are the tread measurements.
Measurement 8: Measure from the top step to the nearby door, wall or other obstruction at the top of the stairs.
The Advantages of Stair Lifts for Seniors In Dalton Massachusetts
Outdoor stair lift Limited mobility is an issue for lots of seniors and a concern for their families in Dalton. Seniors who wish to stay in their houses and stay independent can improve their movement and remain safe by setting up a stair lift.
A stair lift can transport you or a loved one safely from one floor to another in the house. A stair lift can provide a safe ways of transport so that you will not have to worry about the risks of falling on the stairs. It is an especially good option for a senior who lives alone.
3 Essential Uses for Heavy-Duty Stair Lifts In Dalton
Stair lifts can be found in a variety of sizes and capacities. Compact models accommodate and offer mobility for narrow staircases, supporting as much as 350 pounds in the process, and at the other end, sturdy stair lifts provide a wider seat and can deal with a higher range of body types.
1. You Can Offer Access to Nearly Everyone
Because of the larger, more powerful design, the stair lift supplies accessibility and enhances movement for anyone who’s heavier than average. However, the common stair lift might be too narrow or too short for some, and as the heavy-duty design uses a bigger, greater seat, it even more accommodates anyone who’s taller than average or has difficulty easily using a standard model.
2. Commercial Applications
While not needed to fulfill ADA requirements, stair lifts supply an added benefit to those with movement issues.
Within Dalton a house, a standard lift might accommodate two average-sized adults, however what about when you have to deal with the public? Your customer base, clients, and patients likely been available in a variety of sizes and shapes, so the durable model basically matches everyone who would have to use the stairs.
Know that, to set up a sturdy lift, any staircase must offer 36 inches of space.
3. For Multiple Household Members
What happens, though, when several family members need availability? Whether you’re meeting a current need or anticipating a future one, installing a larger lift takes everybody’s physical needs into consideration. If your house’s equipped with sufficient space, take preventative measures by having a sturdy lift set up.
Call Us Now 844-561-5857 For A No Obligation Quote