Stair Lift Clintonville WI

stair lift Clintonville

How Stair Lifts Work

A stair lift is generally a chair that travels along and rail or track that is mounted to a staircase.

There is a motor within the base of the chair that is usually powered by a battery also within the base of the chair. The stair lift motor turns a gear that is meshed into a geared strip on the track or rail. When the gear turns the chair is moved along the geared strip. When the motor turns the gear the chair moves one direction, when the motor’s direction is reversed the chair moves the opposite way.

Call/Send switches are utilized to move the stair lift chair without anybody being on it. This is especially practical if 2 people use the lift and the lift is at the opposite end of the track when a user wishes to utilize it. the user simply calls the lift to come to them utilizing a call/send switch. Another use of call/send switch is to send the lift away after use. Some people don’t like the appearance of the lift parked in the main living area of the home in Clintonville and will send it to the opposite end when not in use. They merely call it back when required.

Stair Lift Components

Although the design and style of stair lifts will vary between makers they all have some standard parts typical to them all:

Track or Rail – The stair lift track supports the chair, supplies a system (usually a geared strip) to propel the chair and guides it up and down the stairway just as a train track guides a train.

Track Overruns – Some stair lifts provide the option of an overrun at either the top of the track, bottom of the track or both. The purpose of a stair lift track overrun is to move the user far from the stairs to securely access or dismount the stair lift in a location where, if they fall, they won’t fall on the stairs.

Power supply – While most stair lifts are battery ran today all model will need a power supply to either charge the battery or power the system directly in the case of non-battery powered systems. Non-battery powered stair lifts draw a lot of power and usually need a dedicated circuit.

Call/Send Controls – Call/Send controls are normally mounted on the wall near each end of the stair lift track to supply a way for a user to call the chair to them or send it away when not needed. They can be either cordless or wired to the lift depending on the model.

Seat – The stair lift seat is merely a seat for the user to sit on while utilizing the lift. Depending on the model it may swivel at the top and/or bottom of the track and will generally fold out of the way when not in use.

Seat Belt – As in a car the stair lift safety belt is intended to hold the user safely seated on the seat while the lift remains in usage.

Foot Rest – The foot remainder of the stair lift is a security feature to prevent the the users feet from hitting the steps while utilizing the lift and a comfort function to support the user’s feet when resting on the seat. The foot rest will have switches developed into them to stop the lift should it strike anything on the stairs and will turn up out of the way when the lift is not in use.

Motor – The motor that drives a stair lift chair along the track is found in the base of the seat.

Transmission – Since the motor turns at expensive a speed to safely move the stair lift the track at kind of transmission is employed to reduce the speed while increasing the power readily available.

Battery Battery charger – Battery powered stair lifts should have a charger of some sort to keep the battery charged. The battery chargers are usually found under the track or near one end of the track. The charger works instantly without any action required by the user.

Battery – The batteries utilized in stair lifts are relatively expensive and found within the base of the seat near the motor. They will have to be changed at some time however their life expectancy is measured in years and thier replacement should not be a huge concern.

The Best Ways To Measure For Your Stair Lift Installation In Clintonville

Measurement 1: Stand at the top of stairs and extend the tape measure down to the landing, letting it rest on edge of each tread. The tape should not sag or bend along the way. Record the distance from the edge of the upper landing to where completion of the tape measure rests on the landing at the bottom of the stairs.

Measurement 2: Measure from the edge of the upper landing (like Measurement 1) to the edge of the first stair’s tread at the bottom.

Measurement 3: Measure the width of your stair’s treads.

Measurement: Measure from the edge of the very first stair at the bottom to the wall (or door), if there is one.

Measurement 5 through 7 Measurements 5-7: These are the tread measurements.

Measurement 8: Measure from the top step to the nearest door, wall or other obstruction at the top of the stairs.

chair lift Clintonville

The Benefits of Stair Lifts for Senior Citizens In Clintonville Wisconsin

Outdoor stair lift Limited mobility is an issue for numerous senior citizens and a concern for their families in Clintonville. Seniors who want to remain in their houses and stay independent can improve their movement and remain safe by installing a stair lift.

A stair lift can transport you or a loved one securely from one floor to another at home. A stair lift can supply a safe ways of transportation so that you will no longer have to fret about the risks of falling on the stairs. It is a specifically excellent option for an elderly person who lives alone.

3 Necessary Utilizes for Heavy-Duty Stair Lifts In Clintonville

Stair lifts come in a range of sizes and capacities. Compact models accommodate and offer movement for narrow staircases, supporting as much as 350 pounds while doing so, and at the other end, heavy-duty stair lifts provide a wider seat and can handle a higher variety of body types.

1. You Can Offer Access to Nearly Everybody

Because of the bigger, stronger design, the stair lift supplies ease of access and improves movement for anyone who’s heavier than average. However, the normal stair lift might be too narrow or too short for some, and as the sturdy design offers a bigger, higher seat, it even more accommodates anyone who’s taller than average or has difficulty comfortably utilizing a standard model.

2. Business Applications

While not had to satisfy ADA requirements, stair lifts offer an added convenience to those with movement issues.

Within Clintonville a home, a basic lift might accommodate two average-sized adults, however what about when you need to deal with the general public? Your customer base, customers, and patients likely can be found in a range of shapes and sizes, so the durable model basically matches everybody who would have to use the stairs.

Be aware that, to install a durable lift, any staircase should supply 36 inches of space.

3. For Numerous Household Members

What happens, though, when multiple member of the family require accessibility? Whether you’re meeting an existing need or anticipating a future one, installing a larger lift takes everyone’s physical requirements into consideration. If your home’s equipped with enough space, take preventative measures by having a durable lift installed.

Call Us Now 844-561-5857 For A No Obligation Quote