Stair Lift Clarksville MD
How Stair Lifts Work
A stair lift is basically a chair that travels along and rail or track that is installed to a stairway.
There is a motor within the base of the chair that is normally powered by a battery also within the base of the chair. The stair lift motor turns a gear that is meshed into a geared strip on the track or rail. When the gear turns the chair is moved along the geared strip. When the motor turns the gear the chair moves one direction, when the motor’s direction is reversed the chair moves the opposite way.
Call/Send switches are utilized to move the stair lift chair without anybody being on it. This is particularly valuable if two individuals use the lift and the lift is at the opposite end of the track when a user wishes to utilize it. the user merely calls the lift to come to them utilizing a call/send switch. Another use of call/send switch is to send out the lift away after usage. Some individuals do not like the look of the lift parked in the main living area of the house in Clarksville and will send it to the opposite end when not in use. They merely call it back when required.
Stair Lift Parts
Although the design and style of stair lifts will vary between manufacturers they all have some fundamental components common to them all:
Track or Rail – The stair lift track supports the chair, supplies a mechanism (generally a geared strip) to propel the chair and guides it up and down the stairway just as a train track guides a train.
Track Overruns – Some stair lifts use the alternative of an overrun at either the top of the track, bottom of the track or both. The purpose of a stair lift track overrun is to move the user away from the stairway to securely access or dismount the stair lift in a place where, if they fall, they will not fall on the stairs.
Power supply – While many stair lifts are battery ran today all model will require a power supply to either charge the battery or power the system straight when it comes to non-battery powered systems. Non-battery powered stair lifts draw a lot of power and generally need a dedicated circuit.
Call/Send Controls – Call/Send controls are generally mounted on the wall near each end of the stair lift track to offer a way for a user to call the chair to them or send it away when not required. They can be either cordless or wired to the lift depending upon the design.
Seat – The stair lift seat is merely a seat for the user to rest on while utilizing the lift. Depending upon the model it may swivel at the top and/or bottom of the track and will generally fold up out of the way when not in use.
Seat Belt – As in a vehicle the stair lift safety belt is intended to hold the user securely seated on the seat while the lift remains in usage.
Foot Rest – The foot remainder of the stair lift is a security feature to prevent the the users feet from striking the steps while using the lift and a comfort function to support the user’s feet when resting on the seat. The foot rest will have switches constructed into them to stop the lift needs to it strike anything on the staircase and will turn up out of the way when the lift is not in use.
Motor – The motor that drives a stair lift chair along the track is found in the base of the seat.
Transmission – Because the motor rotates at too expensive a speed to safely propel the stair lift the track at kind of transmission is employed to decrease the speed while increasing the power offered.
Battery Charger – Battery powered stair lifts should have a battery charger of some sort to keep the battery charged. The chargers are normally found under the track or near one end of the track. The battery charger works immediately without any action needed by the user.
Battery – The batteries used in stair lifts are fairly pricey and found within the base of the seat near the motor. They will need to be replaced at some time however their life expectancy is measured in years and thier replacement should not be a big concern.
Ways To Measure For Your Stair Lift Setup In Clarksville
Measurement 1: Stand at the top of stairs and extend the measuring tape down to the landing, letting it rest on edge of each tread. The tape must not sag or bend along the way. Record the distance from the edge of the upper landing to where completion of the measuring tape rests on the landing at the bottom of the stairs.
Measurement 2: Measure from the edge of the upper landing (like Measurement 1) to the edge of the first stair’s tread at the bottom.
Measurement 3: Determine the width of your stair’s treads.
Measurement: Measure from the edge of the first stair at the bottom to the wall (or door), if there is one.
Measurement 5 through 7 Measurements 5-7: These are the tread measurements.
Measurement 8: Measure from the top step to the closest door, wall or other obstruction at the top of the stairs.
The Benefits of Stair Lifts for Senior Citizens In Clarksville Maryland
Outside stair lift Limited movement is a problem for lots of seniors and a concern for their families in Clarksville. Senior citizens who wish to stay in their homes and remain independent can improve their mobility and stay safe by setting up a stair lift.
A stair lift can transport you or a loved one safely from one floor to another in the house. A stair lift can offer a safe means of transportation so that you will not have to stress over the threats of falling on the stairs. It is a specifically excellent option for an elderly person who lives alone.
3 Essential Uses for Heavy-Duty Stair Lifts In Clarksville
Stair lifts come in a variety of sizes and capacities. Compact models accommodate and provide mobility for narrow staircases, supporting approximately 350 pounds while doing so, and at the other end, sturdy stair lifts offer a broader seat and can deal with a higher series of body types.
1. You Can Supply Access to Nearly Everybody
Because of the larger, stronger design, the stair lift supplies ease of access and enhances mobility for anybody who’s heavier than average. Nevertheless, the common stair lift might be too narrow or too short for some, and as the heavy-duty design uses a bigger, greater seat, it further accommodates anyone who’s taller than average or has problem conveniently using a basic model.
2. Industrial Applications
While not had to fulfill ADA requirements, stair lifts supply an added benefit to those with movement problems.
Within Clarksville a home, a basic lift might accommodate two average-sized adults, but exactly what about when you have to deal with the general public? Your client base, clients, and patients likely been available in a series of sizes and shapes, so the heavy-duty model essentially fits everybody who would have to utilize the stairs.
Know that, to set up a heavy-duty lift, any staircase should offer 36 inches of room.
3. For Multiple Family Members
Exactly what occurs, though, when numerous member of the family require availability? Whether you’re satisfying an existing need or anticipating a future one, setting up a larger lift takes everyone’s physical requirements into consideration. If your home’s equipped with adequate space, take preventative measures by having a heavy-duty lift set up.
Call Us Now 844-561-5857 For A No Obligation Quote