Stair Lift Chestnut Hill MA
How Stair Lifts Work
A stair lift is basically a chair that travels along and rail or track that is installed to a staircase.
There is a motor within the base of the chair that is usually powered by a battery also within the base of the chair. The stair lift motor turns a gear that is meshed into a geared strip on the track or rail. When the gear turns the chair is moved along the geared strip. When the motor turns the gear the chair moves one direction, when the motor’s direction is reversed the chair moves the opposite way.
Call/Send switches are used to move the stair lift chair without anybody being on it. This is particularly valuable if 2 people utilize the lift and the lift is at the opposite end of the track when a user wants to utilize it. the user just calls the lift to come to them utilizing a call/send switch. Another use of call/send switch is to send the lift away after use. Some individuals don’t like the look of the lift parked in the main living area of the home in Chestnut Hill and will send it to the opposite end when not in use. They simply call it back when needed.
Stair Lift Parts
Although the design and style of stair lifts will vary between producers they all have some basic parts common to them all:
Track or Rail – The stair lift track supports the chair, offers a system (typically a geared strip) to propel the chair and guides it up and down the stairway just as a train track guides a train.
Track Overruns – Some stair lifts offer the choice of an overrun at either the top of the track, bottom of the track or both. The purpose of a stair lift track overrun is to move the user far from the stairs to securely access or dismount the stair lift in an area where, if they fall, they won’t fall on the stairs.
Power supply – While most stair lifts are battery ran today all model will require a power supply to either charge the battery or power the unit directly when it comes to non-battery powered systems. Non-battery powered stair lifts draw a lot of power and usually require a devoted circuit.
Call/Send Controls – Call/Send controls are normally installed on the wall near each end of the stair lift track to offer a way for a user to call the chair to them or send it away when not needed. They can be either cordless or wired to the lift depending upon the model.
Seat – The stair lift seat is just a seat for the user to rest on while utilizing the lift. Depending upon the model it might rotate at the top and/or bottom of the track and will usually fold up out of the way when not in use.
Seat Belt – As in a car the stair lift seat belt is intended to hold the user safely seated on the seat while the lift is in usage.
Foot Rest – The foot rest of the stair lift is a security feature to prevent the the users feet from hitting the steps while using the lift and a comfort feature to support the user’s feet when resting on the seat. The foot rest will have switches developed into them to stop the lift ought to it hit anything on the staircase and will flip up out of the way when the lift is not in use.
Motor – The motor that drives a stair lift chair along the track is found in the base of the seat.
Transmission – Because the motor rotates at too high a speed to securely move the stair lift the track at type of transmission is utilized to decrease the speed while increasing the power offered.
Battery Battery charger – Battery powered stair lifts need to have a charger of some sort to keep the battery charged. The battery chargers are usually found under the track or near one end of the track. The charger works automatically with no action required by the user.
Battery – The batteries utilized in stair lifts are fairly pricey and found within the base of the seat near the motor. They will need to be replaced at some time however their life expectancy is measured in years and thier replacement need to not be a huge concern.
The Best Ways To Measure For Your Stair Lift Setup In Chestnut Hill
Measurement 1: Stand at the top of stairs and extend the tape measure down to the landing, letting it rest on edge of each tread. The tape should not sag or bend along the way. Record the distance from the edge of the upper landing to where the end of the measuring tape rests on the landing at the bottom of the stairs.
Measurement 2: Measure from the edge of the upper landing (like Measurement 1) to the edge of the first stair’s tread at the bottom.
Measurement 3: Determine the width of your stair’s treads.
Measurement: Measure from the edge of the very first stair at the bottom to the wall (or door), if there is one.
Measurement 5 through 7 Measurements 5-7: These are the tread measurements.
Measurement 8: Measure from the top step to the nearest door, wall or other obstruction at the top of the stairs.
The Advantages of Stair Lifts for Seniors In Chestnut Hill Massachusetts
Outdoor stair lift Limited movement is a problem for many seniors and a concern for their families in Chestnut Hill. Seniors who want to remain in their homes and remain independent can improve their mobility and stay safe by installing a stair lift.
A stair lift can carry you or a loved one securely from one floor to another in the house. A stair lift can supply a safe ways of transportation so that you will not have to worry about the dangers of falling on the stairs. It is a specifically good alternative for an elderly person who lives alone.
3 Necessary Utilizes for Heavy-Duty Stair Lifts In Chestnut Hill
Stair lifts can be found in a variety of sizes and capacities. Compact models accommodate and provide mobility for narrow staircases, supporting approximately 350 pounds while doing so, and at the other end, durable stair lifts use a larger seat and can handle a greater range of body types.
1. You Can Provide Access to Nearly Everybody
Because of the larger, stronger design, the stair lift supplies ease of access and improves mobility for anyone who’s much heavier than average. However, the normal stair lift might be too narrow or too short for some, and as the heavy-duty design provides a bigger, greater seat, it even more accommodates anybody who’s taller than average or has trouble conveniently using a basic model.
2. Industrial Applications
While not needed to meet ADA requirements, stair lifts supply an added convenience to those with mobility issues.
Within Chestnut Hill a home, a standard lift might accommodate 2 average-sized adults, but exactly what about when you need to deal with the general public? Your client base, customers, and patients most likely been available in a variety of sizes and shapes, so the heavy-duty model essentially matches everyone who would have to utilize the stairs.
Understand that, to set up a durable lift, any staircase should provide 36 inches of room.
3. For Numerous Household Members
Exactly what occurs, however, when several member of the family need ease of access? Whether you’re satisfying a present requirement or anticipating a future one, installing a bigger lift takes everyone’s physical needs into consideration. If your home’s equipped with adequate area, take safety measures by having a durable lift set up.
Call Us Now 844-561-5857 For A No Obligation Quote