Stair Lift Bruceton Mills WV
How Stair Lifts Work
A stair lift is essentially a chair that travels along and rail or track that is mounted to a staircase.
There is a motor within the base of the chair that is generally powered by a battery also within the base of the chair. The stair lift motor turns a gear that is meshed into a geared strip on the track or rail. When the gear turns the chair is moved along the geared strip. When the motor turns the gear the chair moves one direction, when the motor’s direction is reversed the chair moves the opposite way.
Call/Send switches are used to move the stair lift chair without anyone being on it. This is particularly handy if two individuals use the lift and the lift is at the opposite end of the track when a user wishes to use it. the user just calls the lift to come to them using a call/send switch. Another use of call/send switch is to send out the lift away after usage. Some individuals don’t like the appearance of the lift parked in the main living area of the house in Bruceton Mills and will send it to the opposite end when not in use. They simply call it back when required.
Stair Lift Components
Although the design and style of stair lifts will vary between producers they all have some standard parts common to them all:
Track or Rail – The stair lift track supports the chair, offers a system (usually a geared strip) to propel the chair and guides it up and down the stairs just as a train track guides a train.
Track Overruns – Some stair lifts use the alternative of an overrun at either the top of the track, bottom of the track or both. The purpose of a stair lift track overrun is to move the user far from the stairway to safely access or dismount the stair lift in a place where, if they fall, they won’t fall on the stairs.
Power supply – While a lot of stair lifts are battery ran today all model will need a power supply to either charge the battery or power the system straight when it comes to non-battery powered units. Non-battery powered stair lifts draw a lot of power and generally need a devoted circuit.
Call/Send Controls – Call/Send controls are generally installed on the wall near each end of the stair lift track to offer a method for a user to call the chair to them or send it away when not needed. They can be either wireless or wired to the lift depending on the model.
Seat – The stair lift seat is merely a seat for the user to rest on while using the lift. Depending upon the model it might swivel at the top and/or bottom of the track and will typically fold up out of the way when not in use.
Seat Belt – As in an automobile the stair lift seat belt is intended to hold the user safely seated on the seat while the lift is in usage.
Foot Rest – The foot remainder of the stair lift is a security feature to prevent the the users feet from striking the steps while utilizing the lift and a comfort function to support the user’s feet when resting on the seat. The foot rest will have switches developed into them to stop the lift needs to it hit anything on the staircase and will flip up out of the way when the lift is not in use.
Motor – The motor that drives a stair lift chair along the track is found in the base of the seat.
Transmission – Due to the fact that the motor turns at too expensive a speed to securely move the stair lift the track at type of transmission is used to lower the speed while increasing the power readily available.
Battery Charger – Battery powered stair lifts should have a battery charger of some sort to keep the battery charged. The chargers are usually found under the track or near one end of the track. The charger works instantly with no action needed by the user.
Battery – The batteries used in stair lifts are relatively expensive and found within the base of the seat near the motor. They will have to be changed at some time however their life expectancy is measured in years and thier replacement should not be a huge concern.
How To Measure For Your Stair Lift Installation In Bruceton Mills
Measurement 1: Stand at the top of stairs and extend the tape measure down to the landing, letting it rest on edge of each tread. The tape ought to not droop or bend along the way. Record the distance from the edge of the upper landing to where the end of the measuring tape rests on the landing at the bottom of the stairs.
Measurement 2: Measure from the edge of the upper landing (like Measurement 1) to the edge of the first stair’s tread at the bottom.
Measurement 3: Determine the width of your stair’s treads.
Measurement: Measure from the edge of the very first stair at the bottom to the wall (or door), if there is one.
Measurement 5 through 7 Measurements 5-7: These are the tread measurements.
Measurement 8: Measure from the top step to the nearby door, wall or other obstruction at the top of the stairs.
The Advantages of Stair Lifts for Senior Citizens In Bruceton Mills West Virginia
Outdoor stair lift Limited mobility is a concern for lots of senior citizens and an issue for their families in Bruceton Mills. Elderly people who want to stay in their homes and remain independent can enhance their mobility and remain safe by setting up a stair lift.
A stair lift can transfer you or a loved one safely from one floor to another in your home. A stair lift can offer a safe ways of transportation so that you will not need to worry about the threats of falling on the stairs. It is a specifically great option for a senior who lives alone.
3 Vital Uses for Heavy-Duty Stair Lifts In Bruceton Mills
Stair lifts can be found in a range of sizes and capacities. Compact models accommodate and supply movement for narrow staircases, supporting up to 350 pounds in the process, and at the other end, heavy-duty stair lifts offer a wider seat and can deal with a higher range of body types.
1. You Can Offer Access to Nearly Everybody
Because of the larger, stronger design, the stair lift supplies availability and enhances movement for anyone who’s much heavier than average. Nevertheless, the typical stair lift might be too narrow or too short for some, and as the heavy-duty design provides a bigger, higher seat, it further accommodates anyone who’s taller than average or has problem comfortably using a basic design.
2. Industrial Applications
While not needed to fulfill ADA requirements, stair lifts offer an added convenience to those with mobility problems.
Within Bruceton Mills a home, a standard lift might accommodate 2 average-sized adults, however what about when you need to deal with the public? Your client base, customers, and patients most likely come in a series of shapes and sizes, so the heavy-duty model basically suits everyone who would have to utilize the stairs.
Understand that, to install a heavy-duty lift, any staircase must supply 36 inches of space.
3. For Multiple Household Members
Exactly what takes place, though, when several member of the family require accessibility? Whether you’re meeting a present requirement or expecting a future one, installing a bigger lift takes everyone’s physical requirements into consideration. If your house’s equipped with enough space, take precautions by having a sturdy lift set up.
Call Us Now 844-561-5857 For A No Obligation Quote