Stair Lift Bolton MA

stair lift Bolton

How Stair Lifts Work

A stair lift is generally a chair that travels along and rail or track that is installed to a staircase.

There is a motor within the base of the chair that is typically powered by a battery also within the base of the chair. The stair lift motor turns a gear that is meshed into a geared strip on the track or rail. When the gear turns the chair is moved along the geared strip. When the motor turns the gear the chair moves one direction, when the motor’s direction is reversed the chair moves the opposite way.

Call/Send switches are used to move the stair lift chair without anybody being on it. This is particularly practical if two individuals utilize the lift and the lift is at the opposite end of the track when a user wants to use it. the user just calls the lift to come to them utilizing a call/send switch. Another use of call/send switch is to send out the lift away after usage. Some individuals do not like the appearance of the lift parked in the main living area of the house in Bolton and will send it to the opposite end when not in use. They simply call it back when required.

Stair Lift Components

Although the design and style of stair lifts will vary between makers they all have some fundamental parts typical to them all:

Track or Rail – The stair lift track supports the chair, offers a mechanism (generally a geared strip) to propel the chair and guides it up and down the staircase just as a train track guides a train.

Track Overruns – Some stair lifts use the choice of an overrun at either the top of the track, bottom of the track or both. The purpose of a stair lift track overrun is to move the user away from the staircase to securely access or dismount the stair lift in an area where, if they fall, they won’t fall on the stairs.

Power supply – While a lot of stair lifts are battery operated today all model will require a power supply to either charge the battery or power the unit straight in the case of non-battery powered units. Non-battery powered stair lifts draw a lot of power and usually require a dedicated circuit.

Call/Send Controls – Call/Send controls are normally installed on the wall near each end of the stair lift track to offer a method for a user to call the chair to them or send it away when not required. They can be either cordless or wired to the lift depending upon the model.

Seat – The stair lift seat is simply a seat for the user to rest on while using the lift. Depending on the model it might swivel at the top and/or bottom of the track and will typically fold up out of the way when not in use.

Seat Belt – As in a vehicle the stair lift seat belt is meant to hold the user safely seated on the seat while the lift is in usage.

Foot Rest – The foot remainder of the stair lift is a security feature to prevent the the users feet from hitting the steps while using the lift and a comfort function to support the user’s feet when resting on the seat. The foot rest will have switches constructed into them to stop the lift should it hit anything on the stairs and will flip up out of the way when the lift is not in use.

Motor – The motor that drives a stair lift chair along the track is found in the base of the seat.

Transmission – Due to the fact that the motor rotates at too expensive a speed to safely move the stair lift the track at type of transmission is utilized to reduce the speed while increasing the power readily available.

Battery Battery charger – Battery powered stair lifts need to have a battery charger of some sort to keep the battery charged. The battery chargers are usually found under the track or near one end of the track. The battery charger works immediately without any action needed by the user.

Battery – The batteries used in stair lifts are relatively expensive and found within the base of the seat near the motor. They will need to be replaced at some time but their life span is measured in years and thier replacement must not be a huge issue.

The Best Ways To Measure For Your Stair Lift Setup In Bolton

Measurement 1: Stand at the top of stairs and extend the tape measure down to the landing, letting it rest on edge of each tread. The tape needs to not sag or bend along the way. Record the distance from the edge of the upper landing to where the end of the tape measure rests on the landing at the bottom of the stairs.

Measurement 2: Measure from the edge of the upper landing (like Measurement 1) to the edge of the very first stair’s tread at the bottom.

Measurement 3: Determine the width of your stair’s treads.

Measurement: Measure from the edge of the very first stair at the bottom to the wall (or door), if there is one.

Measurement 5 through 7 Measurements 5-7: These are the tread measurements.

Measurement 8: Measure from the top step to the nearby door, wall or other obstruction at the top of the stairs.

chair lift Bolton

The Advantages of Stair Lifts for Seniors In Bolton Massachusetts

Outside stair lift Limited mobility is an issue for lots of seniors and an issue for their families in Bolton. Seniors who wish to remain in their homes and remain independent can enhance their movement and remain safe by installing a stair lift.

A stair lift can transfer you or a loved one safely from one floor to another in your home. A stair lift can offer a safe means of transport so that you will no longer need to fret about the dangers of falling on the stairs. It is a particularly good alternative for a senior who lives alone.

3 Vital Uses for Heavy-Duty Stair Lifts In Bolton

Stair lifts can be found in a range of sizes and capacities. Compact models accommodate and supply mobility for narrow staircases, supporting up to 350 pounds while doing so, and at the other end, sturdy stair lifts offer a wider seat and can handle a greater variety of body types.

1. You Can Offer Access to Almost Everybody

Because of the bigger, stronger design, the stair lift offers availability and improves movement for anyone who’s much heavier than average. However, the normal stair lift might be too narrow or too short for some, and as the durable design provides a bigger, higher seat, it further accommodates anybody who’s taller than average or has trouble conveniently utilizing a standard model.

2. Industrial Applications

While not needed to satisfy ADA standards, stair lifts provide an added benefit to those with mobility issues.

Within Bolton a home, a standard lift might accommodate two average-sized adults, but what about when you have to deal with the general public? Your client base, customers, and patients most likely been available in a series of shapes and sizes, so the heavy-duty model basically matches everyone who would have to utilize the stairs.

Understand that, to install a sturdy lift, any staircase must offer 36 inches of space.

3. For Multiple Family Members

What takes place, though, when several member of the family need availability? Whether you’re satisfying an existing requirement or anticipating a future one, setting up a bigger lift takes everyone’s physical needs into consideration. If your house’s geared up with adequate space, take precautions by having a durable lift installed.

Call Us Now 844-561-5857 For A No Obligation Quote