Stair Lift Beverly WV
How Stair Lifts Work
A stair lift is essentially a chair that travels along and rail or track that is installed to a stairs.
There is a motor within the base of the chair that is typically powered by a battery also within the base of the chair. The stair lift motor turns a gear that is meshed into a geared strip on the track or rail. When the gear turns the chair is moved along the geared strip. When the motor turns the gear the chair moves one direction, when the motor’s direction is reversed the chair moves the opposite way.
Call/Send switches are used to move the stair lift chair without anyone being on it. This is especially practical if 2 people use the lift and the lift is at the opposite end of the track when a user wants to utilize it. the user just calls the lift to come to them using a call/send switch. Another use of call/send switch is to send the lift away after usage. Some people do not like the appearance of the lift parked in the main living area of the home in Beverly and will send it to the opposite end when not in use. They merely call it back when required.
Stair Lift Parts
Although the design and style of stair lifts will vary between producers they all have some basic components common to them all:
Track or Rail – The stair lift track supports the chair, supplies a system (usually a geared strip) to propel the chair and guides it up and down the staircase just as a train track guides a train.
Track Overruns – Some stair lifts use the choice of an overrun at either the top of the track, bottom of the track or both. The function of a stair lift track overrun is to move the user away from the stairway to safely access or dismount the stair lift in a place where, if they fall, they will not fall on the stairs.
Power supply – While many stair lifts are battery operated today all model will require a power supply to either charge the battery or power the unit directly when it comes to non-battery powered units. Non-battery powered stair lifts draw a lot of power and typically require a devoted circuit.
Call/Send Controls – Call/Send controls are normally installed on the wall near each end of the stair lift track to provide a way for a user to call the chair to them or send it away when not required. They can be either cordless or wired to the lift depending on the model.
Seat – The stair lift seat is just a seat for the user to sit on while using the lift. Depending upon the model it might rotate at the top and/or bottom of the track and will typically fold out of the way when not in use.
Seat Belt – As in a vehicle the stair lift safety belt is meant to hold the user safely seated on the seat while the lift remains in use.
Foot Rest – The foot remainder of the stair lift is a safety function to prevent the the users feet from striking the steps while using the lift and a comfort feature to support the user’s feet when sitting on the seat. The foot rest will have switches developed into them to stop the lift must it hit anything on the stairway and will turn up out of the way when the lift is not in use.
Motor – The motor that drives a stair lift chair along the track is found in the base of the seat.
Transmission – Since the motor rotates at too high a speed to securely propel the stair lift the track at kind of transmission is employed to reduce the speed while increasing the power available.
Battery Battery charger – Battery powered stair lifts need to have a charger of some sort to keep the battery charged. The chargers are generally found under the track or near one end of the track. The battery charger works automatically with no action required by the user.
Battery – The batteries utilized in stair lifts are fairly expensive and found within the base of the seat near the motor. They will need to be replaced at some time but their life expectancy is measured in years and thier replacement must not be a huge concern.
Ways To Measure For Your Stair Lift Installation In Beverly
Measurement 1: Stand at the top of stairs and extend the measuring tape down to the landing, letting it rest on edge of each tread. The tape must not sag or bend along the way. Record the distance from the edge of the upper landing to where the end of the tape measure rests on the landing at the bottom of the stairs.
Measurement 2: Measure from the edge of the upper landing (like Measurement 1) to the edge of the first stair’s tread at the bottom.
Measurement 3: Determine the width of your stair’s treads.
Measurement: Measure from the edge of the first stair at the bottom to the wall (or door), if there is one.
Measurement 5 through 7 Measurements 5-7: These are the tread measurements.
Measurement 8: Measure from the top step to the nearby door, wall or other obstruction at the top of the stairs.
The Benefits of Stair Lifts for Seniors In Beverly West Virginia
Outside stair lift Limited mobility is a problem for lots of senior citizens and a concern for their families in Beverly. Senior citizens who want to remain in their houses and stay independent can improve their movement and stay safe by setting up a stair lift.
A stair lift can transport you or a loved one securely from one floor to another in the house. A stair lift can supply a safe ways of transport so that you will not need to fret about the risks of falling on the stairs. It is an especially excellent option for an elderly person who lives alone.
3 Necessary Utilizes for Heavy-Duty Stair Lifts In Beverly
Stair lifts can be found in a variety of sizes and capacities. Compact models accommodate and offer movement for narrow staircases, supporting as much as 350 pounds at the same time, and at the other end, heavy-duty stair lifts provide a wider seat and can deal with a greater series of body types.
1. You Can Provide Access to Almost Everyone
Because of the larger, more powerful design, the stair lift offers ease of access and enhances movement for anyone who’s heavier than average. Nevertheless, the normal stair lift might be too narrow or too short for some, and as the sturdy design provides a larger, higher seat, it further accommodates anyone who’s taller than average or has trouble easily using a standard model.
2. Business Applications
While not had to meet ADA standards, stair lifts provide an added convenience to those with mobility concerns.
Within Beverly a house, a basic lift might accommodate two average-sized adults, but what about when you have to deal with the public? Your client base, clients, and patients likely can be found in a variety of shapes and sizes, so the sturdy model essentially suits everybody who would need to utilize the stairs.
Understand that, to install a durable lift, any staircase must provide 36 inches of space.
3. For Numerous Household Members
What takes place, however, when several family members need availability? Whether you’re satisfying a current need or expecting a future one, installing a bigger lift takes everyone’s physical requirements into consideration. If your house’s equipped with sufficient area, take preventative measures by having a durable lift installed.
Call Us Now 844-561-5857 For A No Obligation Quote