Stair Lift Berry AL
How Stair Lifts Work
A stair lift is generally a chair that travels along and rail or track that is installed to a staircase.
There is a motor within the base of the chair that is typically powered by a battery also within the base of the chair. The stair lift motor turns a gear that is meshed into a geared strip on the track or rail. When the gear turns the chair is moved along the geared strip. When the motor turns the gear the chair moves one direction, when the motor’s direction is reversed the chair moves the opposite way.
Call/Send switches are utilized to move the stair lift chair without anyone being on it. This is particularly valuable if two people utilize the lift and the lift is at the opposite end of the track when a user wants to utilize it. the user simply calls the lift to come to them using a call/send switch. Another use of call/send switch is to send the lift away after usage. Some individuals do not like the look of the lift parked in the main living area of the house in Berry and will send it to the opposite end when not in use. They simply call it back when needed.
Stair Lift Components
Although the design and style of stair lifts will vary between manufacturers they all have some standard elements common to them all:
Track or Rail – The stair lift track supports the chair, offers a system (usually a geared strip) to propel the chair and guides it up and down the stairway just as a train track guides a train.
Track Overruns – Some stair lifts use the choice of an overrun at either the top of the track, bottom of the track or both. The purpose of a stair lift track overrun is to move the user far from the staircase to safely access or dismount the stair lift in a place where, if they fall, they will not fall on the stairs.
Power supply – While the majority of stair lifts are battery ran today all model will need a power supply to either charge the battery or power the system straight when it comes to non-battery powered units. Non-battery powered stair lifts draw a lot of power and typically need a dedicated circuit.
Call/Send Controls – Call/Send controls are typically mounted on the wall near each end of the stair lift track to provide a way for a user to call the chair to them or send it away when not needed. They can be either cordless or wired to the lift depending on the model.
Seat – The stair lift seat is simply a seat for the user to rest on while using the lift. Depending on the model it may rotate at the top and/or bottom of the track and will normally fold out of the way when not in use.
Seat Belt – As in a car the stair lift seat belt is planned to hold the user safely seated on the seat while the lift is in use.
Foot Rest – The foot remainder of the stair lift is a security function to prevent the the users feet from hitting the steps while utilizing the lift and a comfort function to support the user’s feet when sitting on the seat. The foot rest will have switches constructed into them to stop the lift should it hit anything on the staircase and will turn up out of the way when the lift is not in use.
Motor – The motor that drives a stair lift chair along the track is found in the base of the seat.
Transmission – Due to the fact that the motor rotates at expensive a speed to securely move the stair lift the track at type of transmission is used to reduce the speed while increasing the power readily available.
Battery Battery charger – Battery powered stair lifts must have a charger of some sort to keep the battery charged. The chargers are normally found under the track or near one end of the track. The charger works instantly with no action required by the user.
Battery – The batteries used in stair lifts are relatively costly and found within the base of the seat near the motor. They will need to be replaced at some time but their life expectancy is measured in years and thier replacement ought to not be a huge concern.
How To Measure For Your Stair Lift Setup In Berry
Measurement 1: Stand at the top of stairs and extend the measuring tape down to the landing, letting it rest on edge of each tread. The tape should not sag or bend along the way. Record the distance from the edge of the upper landing to where completion of the measuring tape rests on the landing at the bottom of the stairs.
Measurement 2: Measure from the edge of the upper landing (like Measurement 1) to the edge of the first stair’s tread at the bottom.
Measurement 3: Measure the width of your stair’s treads.
Measurement: Measure from the edge of the very first stair at the bottom to the wall (or door), if there is one.
Measurement 5 through 7 Measurements 5-7: These are the tread measurements.
Measurement 8: Measure from the top step to the closest door, wall or other obstruction at the top of the stairs.
The Advantages of Stair Lifts for Seniors In Berry Alabama
Outdoor stair lift Limited mobility is an issue for many senior citizens and a concern for their families in Berry. Senior citizens who want to remain in their homes and stay independent can improve their movement and stay safe by setting up a stair lift.
A stair lift can transport you or a loved one safely from one floor to another in your home. A stair lift can supply a safe ways of transport so that you will no longer have to worry about the threats of falling on the stairs. It is a specifically great option for a senior who lives alone.
3 Essential Utilizes for Heavy-Duty Stair Lifts In Berry
Stair lifts been available in a series of sizes and capacities. Compact models accommodate and supply mobility for narrow staircases, supporting as much as 350 pounds while doing so, and at the other end, heavy-duty stair lifts use a larger seat and can handle a greater range of body types.
1. You Can Supply Access to Nearly Everybody
Because of the larger, more powerful design, the stair lift supplies ease of access and improves mobility for anyone who’s much heavier than average. However, the normal stair lift might be too narrow or too short for some, and as the heavy-duty design uses a bigger, higher seat, it even more accommodates anybody who’s taller than average or has difficulty comfortably using a standard design.
2. Industrial Applications
While not needed to meet ADA standards, stair lifts provide an added convenience to those with movement problems.
Within Berry a house, a standard lift might accommodate two average-sized adults, but exactly what about when you have to deal with the public? Your customer base, customers, and patients most likely can be found in a series of sizes and shapes, so the durable model basically fits everyone who would need to utilize the stairs.
Understand that, to install a heavy-duty lift, any staircase must supply 36 inches of room.
3. For Numerous Household Members
What occurs, though, when multiple family members need ease of access? Whether you’re satisfying an existing requirement or anticipating a future one, setting up a bigger lift takes everybody’s physical requirements into consideration. If your house’s geared up with adequate area, take preventative measures by having a heavy-duty lift installed.
Call Us Now 844-561-5857 For A No Obligation Quote