Stair Lift Ballard WV

stair lift Ballard

How Stair Lifts Work

A stair lift is generally a chair that travels along and rail or track that is installed to a stairs.

There is a motor within the base of the chair that is normally powered by a battery also within the base of the chair. The stair lift motor turns a gear that is meshed into a geared strip on the track or rail. When the gear turns the chair is moved along the geared strip. When the motor turns the gear the chair moves one direction, when the motor’s direction is reversed the chair moves the opposite way.

Call/Send switches are used to move the stair lift chair without anyone being on it. This is particularly practical if 2 individuals use the lift and the lift is at the opposite end of the track when a user wishes to use it. the user simply calls the lift to come to them using a call/send switch. Another use of call/send switch is to send the lift away after usage. Some people don’t like the appearance of the lift parked in the main living area of the house in Ballard and will send it to the opposite end when not in use. They merely call it back when needed.

Stair Lift Components

Although the design and style of stair lifts will vary between makers they all have some basic components typical to them all:

Track or Rail – The stair lift track supports the chair, offers a mechanism (generally a geared strip) to move the chair and guides it up and down the staircase just as a train track guides a train.

Track Overruns – Some stair lifts provide the alternative of an overrun at either the top of the track, bottom of the track or both. The purpose of a stair lift track overrun is to move the user far from the staircase to securely access or dismount the stair lift in a place where, if they fall, they will not fall on the stairs.

Power supply – While the majority of stair lifts are battery ran today all model will need a power supply to either charge the battery or power the unit directly in the case of non-battery powered units. Non-battery powered stair lifts draw a great deal of power and typically require a devoted circuit.

Call/Send Controls – Call/Send controls are normally installed on the wall near each end of the stair lift track to supply a way for a user to call the chair to them or send it away when not required. They can be either wireless or wired to the lift depending upon the design.

Seat – The stair lift seat is simply a seat for the user to sit on while utilizing the lift. Depending upon the model it may rotate at the top and/or bottom of the track and will usually fold out of the way when not in use.

Seat Belt – As in a vehicle the stair lift seat belt is meant to hold the user securely seated on the seat while the lift remains in use.

Foot Rest – The foot remainder of the stair lift is a safety feature to prevent the the users feet from striking the steps while utilizing the lift and a comfort feature to support the user’s feet when sitting on the seat. The foot rest will have switches constructed into them to stop the lift should it strike anything on the stairs and will flip up out of the way when the lift is not in use.

Motor – The motor that drives a stair lift chair along the track is found in the base of the seat.

Transmission – Due to the fact that the motor turns at expensive a speed to securely propel the stair lift the track at type of transmission is employed to lower the speed while increasing the power readily available.

Battery Charger – Battery powered stair lifts need to have a battery charger of some sort to keep the battery charged. The battery chargers are normally found under the track or near one end of the track. The charger works immediately without any action needed by the user.

Battery – The batteries used in stair lifts are relatively costly and found within the base of the seat near the motor. They will need to be changed at some time but their life expectancy is measured in years and thier replacement must not be a big concern.

The Best Ways To Measure For Your Stair Lift Setup In Ballard

Measurement 1: Stand at the top of stairs and extend the measuring tape down to the landing, letting it rest on edge of each tread. The tape must not sag or flex along the way. Record the distance from the edge of the upper landing to where completion of the tape measure rests on the landing at the bottom of the stairs.

Measurement 2: Measure from the edge of the upper landing (like Measurement 1) to the edge of the first stair’s tread at the bottom.

Measurement 3: Determine the width of your stair’s treads.

Measurement: Measure from the edge of the very first stair at the bottom to the wall (or door), if there is one.

Measurement 5 through 7 Measurements 5-7: These are the tread measurements.

Measurement 8: Measure from the top step to the nearby door, wall or other obstruction at the top of the stairs.

chair lift Ballard

The Advantages of Stair Lifts for Senior Citizens In Ballard West Virginia

Outdoor stair lift Limited movement is a concern for numerous senior citizens and a concern for their families in Ballard. Elderly people who want to remain in their houses and remain independent can improve their mobility and stay safe by setting up a stair lift.

A stair lift can carry you or a loved one securely from one floor to another in your home. A stair lift can offer a safe means of transportation so that you will no longer need to fret about the threats of falling on the stairs. It is a specifically great choice for a senior citizen who lives alone.

3 Necessary Utilizes for Heavy-Duty Stair Lifts In Ballard

Stair lifts been available in a series of sizes and capacities. Compact models accommodate and supply movement for narrow staircases, supporting approximately 350 pounds at the same time, and at the other end, sturdy stair lifts offer a wider seat and can handle a greater range of body types.

1. You Can Provide Access to Nearly Everyone

Because of the bigger, stronger design, the stair lift offers availability and enhances movement for anyone who’s much heavier than average. Nevertheless, the typical stair lift might be too narrow or too short for some, and as the heavy-duty design uses a larger, greater seat, it further accommodates anyone who’s taller than average or has trouble comfortably utilizing a basic design.

2. Industrial Applications

While not had to meet ADA standards, stair lifts supply an added convenience to those with movement concerns.

Within Ballard a home, a basic lift might accommodate two average-sized adults, however what about when you need to deal with the general public? Your customer base, customers, and patients most likely can be found in a series of shapes and sizes, so the heavy-duty model essentially matches everyone who would have to utilize the stairs.

Understand that, to install a sturdy lift, any staircase must offer 36 inches of space.

3. For Numerous Household Members

Exactly what happens, though, when several member of the family require accessibility? Whether you’re satisfying a current need or anticipating a future one, setting up a bigger lift takes everyone’s physical requirements into consideration. If your house’s geared up with sufficient area, take precautions by having a sturdy lift installed.

Call Us Now 844-561-5857 For A No Obligation Quote